The cards I am sharing today were made for my Christmas Stamp-a-Stack using the lovely Pine Tree Trimmings stamp set, Dies and the Season of Elegance designer series paper (dsp). I designed 10 cards, and the ladies make 2 of each design.
Colours used to make these projects are:
Each attendee’s pack contained the Pine Tree Trimmings stamp set and dies. A ¼ pack of the Season of Elegance dsp, a pack of Adhesive-backed Sparkle Gems, 2 Tree Shaker Domes, a pouch of Gold Shaker Stars, some Gold Foil, 3 ink spots filled with Cherry Cobbler, Lost Lagoon and Mossy Meadow inks, 20 Envelopes, 20 card bases and all the layers and die cut pieces to create the cards.
Card 1 – Trio of Pines Card
Basic Beige card bases – 8¼” by 5⅞” – scored at 4⅛” x 2
Cherry Cobbler – 5⅛” by 3⅜” x 2
Basic White – 5” by 3¼” x 2
Lost Lagoon – 2½” by ⅜” x 2
Basic White – 5½” by 3 ¾” x 2 – for the inside

www.crafty-rootes.co.uk – The Pine Tree Trimmings stamp set and dies used with the Season of Elegance designer series paper to make multiple Christmas cards for my November 2025 Stamp-a-Stack
- Stamp the pine tree on the smaller piece of White card with Mossy Meadow ink
- Without re-inking stamp the tree again to the right.
- Ink up the tree again and stamp off, stamp to the left of the original tree
- Glue the stamped panel to the Cherry Cobbler layer.
- Mount the whole panel onto the Basic Beige card front
- Stamp the sentiment in Mossy Meadow ink on the Lost Lagoon strip. Angle the end and add to the card front
Card 2 – Trio of Pine Trees With A Star
Cherry Cobbler card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Mossy Meadow – 5⅛” by 3⅜” x 2
Basic White – 5” by 3¼” x 2
Season of Elegance dsp – 3¼” by 1½” x 2
Basic White card – 5½” by 3¾” x 2- for the inside
Scrap Gold Foil

www.crafty-rootes.co.uk – The Pine Tree Trimmings stamp set and dies used with the Season of Elegance designer series paper to make multiple Christmas cards for my November 2025 Stamp-a-Stack
- Stamp the pine tree on smaller piece of White card with Mossy Meadow ink about 1½” from the bottom
- Without re-inking stamp the tree again to the right.
- Ink up the tree again and stamp off, stamp to the left of the original tree
- Cut a piece of designer series paper (dsp) – 3¼” by 1½”
- Stamp the sentiment onto dsp with Cherry Cobbler ink and glue to stamped panel
- Glue stamped panel to Mossy Meadow layer and mount on Cherry Cobbler card base on Dimensionals
- Die cut a star from Gold Foil, add to middle tree
Card 3 – Pine Tree Forest
Lost Lagoon card base – 8¼” by 5⅞” scored at 4⅛” x 2
Season of Elegance dsp – 5” by 3¼” x 2
Basic White – 4¾” by 3” x 2
Basic White card – 5½” by 3¾” x 2- for the inside
Scrap Basic White & Gold Foil

www.crafty-rootes.co.uk – The Pine Tree Trimmings stamp set and dies used with the Season of Elegance designer series paper to make multiple Christmas cards for my November 2025 Stamp-a-Stack
- Stamp the pine tree in Lost Lagoon ink on the right-side of the smaller piece of Basic White card. Stamp again without re-inking.
- Repeat the above and add a final stamped off tree – 5 in total, 2 full and 3 stamped off
- Stamp the sentiment in Mossy Meadow ink to the left of the panel
- Cut a piece of dsp – 5” by 3¼”
- Glue the stamped panel to the panel of dsp then to the Lost Lagoon card front
- Stamp the pine tree in Mossy Meadow ink onto scrap White card and die cut
- Add die cut tree to card front on Dimensionals
- Add a die cut Gold Foil star
Card 4 – Random Triple Trees
Mossy Meadow card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Basic Beige – 5⅛” by 3⅜” x 2
Basic White – 5” by 3¼” x 2
Basic Beige label – die cut with Nested Essentials x 2
Basic White – 5½” by 3¾” x 4 – 2 for the inside

www.crafty-rootes.co.uk – The Pine Tree Trimmings stamp set and dies used with the Season of Elegance designer series paper to make multiple Christmas cards for my November 2025 Stamp-a-Stack
- Stamp the open tree with Lost Lagoon ink on the smaller White card panel
- Stamp the tree of stars with Mossy Meadow ink and the pine tree with Cherry Cobbler ink.
- Fill in the small gaps around with the same trees
- Glue the stamped panel to the Basic Beige layer and mount on card front on Dimensionals
- Stamp sentiment on the die cut label in Lost Lagoon ink
- Glue to the card front
Card 5 – Triple Tree of Stars
Cherry Cobbler card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Basic White – 5½” by 3¾” – x 4 – 2 – for the inside
Basic Beige – 5⅜” by 3⅝” – x 2
Season of Elegance dsp – 5⅜” by ¾”
Basic White – 2½” by ½”

www.crafty-rootes.co.uk – The Pine Tree Trimmings stamp set and dies used with the Season of Elegance designer series paper to make multiple Christmas cards for my November 2025 Stamp-a-Stack
- Stamp the tree of stars in the centre of the Basic Beige panel, about ¾” from the bottom with Cherry Cobbler ink
- Stamp the tree of stars to the left with Lost Lagoon ink
- Stamp the tree of stars to the right with Mossy Meadow ink
- Cut a piece of dsp 5⅜” by ¾” and glued to the panel below the trees
- Adhere the panel to one of the White panels.
- Mount on card front on Dimensionals
- Stamp sentiment in Mossy Meadow ink on strip of white card and add to card front
Card 6 – Three Different Trees
Thick Basic White card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Season of Elegance dsp – 5⅞” by 2” x 2
Mossy Meadow – 4⅞” by 3⅛” x 2
Basic White – 4 ¾” by 3” x 2
Basic White – 2⅜” by ⅜” x 2 – sentiment
Scrap Basic White & Gold Foil

www.crafty-rootes.co.uk – The Pine Tree Trimmings stamp set and dies used with the Season of Elegance designer series paper to make multiple Christmas cards for my November 2025 Stamp-a-Stack
- Cut a piece of Season of Elegance dsp 5⅞” by 2”, glue to the bottom of the White card base
- Glue the White panel to the Mossy Meadow layer and glue to the card front
- Stamp the three trees on scrap Basic White card, one in Mossy Meadow, one in Lost Lagoon and the last in Cherry Cobbler.
- Die cut all the trees and glue one on each side of the white panel
- Add the final tree in the centre on Dimensionals
- Stamp sentiment in Cherry Cobbler ink on the strip of Beige card. Add on Dimensionals.
- Add a die cut Gold star to the top of the centre tree
Card 7 – Trimmed Green Tree
Thick Basic White card bases – 8¼” by 5⅞” – scored at 4⅛” x 2
Season of Elegance dsp – 4⅛” by 2⅞” x 2
Basic White – 4⅛” by 1¼” x 2
Season of Elegance dsp – 4⅛” by 1⅛” x 2
Old Olive – 3½” by 2¼” x 2
Scrap Season of Elegance dsp & Gold Foil

www.crafty-rootes.co.uk – The Pine Tree Trimmings stamp set and dies used with the Season of Elegance designer series paper to make multiple Christmas cards for my November 2025 Stamp-a-Stack
- Cut a piece of Season of Elegance dsp 4⅛” by 2⅞” and glue it to White card front
- Cut a piece of Season of Elegance dsp 4⅛” by 1⅛” and glue it to strip of White card. Glue this to card front
- Stamp sentiment in lower right corner with Cherry Cobbler ink
- Stamp the open tree on Old Olive card with Mossy Meadow ink and die cut
- From scrap Season of Elegance dsp die cut the strings of tree trimmings
- Cut the strings of trimming apart and glue to the tree
- Add a die cut Gold Foil star and mount the tree on Dimensionals
Card 8 – Stripy Tree
Mossy Meadow card bases – 8¼” by 5⅞” – scored at 4⅛” x 2
Basic White – 5⅛” by 3⅜” x 2
Basic Beige – 5” by 3¼” x 2
Basic White – 3½” by 2½” x 2 with Adhesive Sheet – 3½” by 2½” x 2 applied to the back
Basic White – 5½” by 3¾” x 2 – for the inside
Scrap Gold Foil

www.crafty-rootes.co.uk – The Pine Tree Trimmings stamp set and dies used with the Season of Elegance designer series paper to make multiple Christmas cards for my November 2025 Stamp-a-Stack
- Die cut the tree in the Basic Beige panel – you don’t need the die cut piece
- Stamp the sentiment below the negative die cut tree with Mossy Meadow ink
- Remove the backing from the Adhesive Sheet on the back of 3½” by 2½” white panel.
- Cut ⅜” strips of dsp of different lengths and apply the strips at a slant to fill the sticky panel
- Glue the stripy piece to the 5⅛” by 3⅜” white card, moving it so that it would be covered by the opening of negative die cut panel
- Add Beige panel overtop on Dimensionals
- Add the die cut Gold Foil star
Card 9 – Presents Galore
Lost Lagoon card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Season of Elegance dsp – 5½” by 3¾” x 2
Basic White card – 5⅜” by 3⅝” x 2
Basic White label – die cut from Nested Essentials x 2
Basic White – 5½” by 3¾” x 2 – for the inside
Scrap Season of Elegance dsp & Gold Foil

www.crafty-rootes.co.uk – The Pine Tree Trimmings stamp set and dies used with the Season of Elegance designer series paper to make multiple Christmas cards for my November 2025 Stamp-a-Stack
- Place the die cut label on the 5⅜” by 3⅝” panel of White and lightly draw around it
- Cut a piece of dsp – 5½” by 3¾”
- Glue the White panel to the dsp and then glue to the Lost Lagoon card front
- On scrap pieces of dsp stamp both parcels 4 or 5 times and die cut each parcel
- Glue the parcels around the drawn rectangle taking care to overlap with the pencil line
- Stamp the sentiment in Cherry Cobbler ink onto die cut label and add to card front on Dimensionals
- Die cut a tree trimming piece from scrap dsp and add to the label
- Die cut 5 stars from Gold Foil and add to card front
Card 10 – Shaker Tree
Basic Beige card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Cherry Cobbler – 5⅛” by 3⅜” x 2
Basic White – 5” by 3¼” x 2
Season of Elegance dsp – 3½” by 2½” x 2
Basic White – 5 ½” by 3 ¾” x 2 – for the inside

www.crafty-rootes.co.uk – The Pine Tree Trimmings stamp set and dies used with the Season of Elegance designer series paper to make multiple Christmas cards for my November 2025 Stamp-a-Stack
- Die cut a tree from the centre of the 5” by 3¼” piece of White card
- Stamp the sentiment below in Cherry Cobbler ink
- Cut a piece of Season of Elegance dsp 3½” by 2½” and place the pinch of Gold Shaker Stars in the centre
- Peel off the adhesive strip from the back of the shaker tree and place over the dsp with the stars inside
- Take the adhesive backing off the shaker tree and place the negative die cut White panel overtop
- Add the whole piece to the Cherry Cobbler panel and then to the Basic Beige card front

www.crafty-rootes.co.uk – The Pine Tree Trimmings stamp set and dies used with the Season of Elegance designer series paper to make multiple Christmas cards for my November 2025 Stamp-a-Stack
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Mo x
Supplies used:















































































































