I created the roses for sympathy card using the following supplies:
Blackberry Bliss card base – 8¼” by 5⅞” scored at 4⅛” on the long side Basic White – 5½” by 3¾” x 2 – one for the inside Berry Botanicals Vellum – 5⅜” by 3⅝” Scrap Basic White
I used a little Seal Adhesive to tack down the panel of Berry Botanicals Vellum to one of the Basic White panels. I love that this vellum is so thick that you can’t see the adhesive through it.
www.crafty-rootes.co.uk – The Boutique Blossoms stamp set and co-ordinating dies used with the Berry Botanicals Vellum to make a thinking of you card.
The panel was then adhered to the Blackberry Bliss card front.
www.crafty-rootes.co.uk – The Boutique Blossoms stamp set and co-ordinating dies used with the Berry Botanicals Vellum to make a thinking of you card.
On scrap Basic White card, I stamped the Outline of both flowers using full strength Blackberry Bliss ink. The solid infill image for each flower was then stamped in 2nd generation Blackberry Bliss. The flowers were then die cut using the Boutique Blossoms Dies.
www.crafty-rootes.co.uk – The Boutique Blossoms stamp set and co-ordinating dies used with the Berry Botanicals Vellum to make a thinking of you card.
Using the same dies, I die cut 3 of the small leafy sprigs from scrap Basic White card. I added the largest flower on Dimensionals and the other flower and the leaves using Mini Glue Dots.
www.crafty-rootes.co.uk – The Boutique Blossoms stamp set and co-ordinating dies used with the Berry Botanicals Vellum to make a thinking of you card.
The sentiment, from the Sunshine & Tulips stamp set was stamped on scrap Basic White card using Peaceful Pine ink. I punched it out using the Three Banner Punch and added it to the card front.
www.crafty-rootes.co.uk – The Boutique Blossoms stamp set and co-ordinating dies used with the Berry Botanicals Vellum to make a thinking of you card.
A trio of Iridescent Faceted Gems finished the card.
Order goodies/Join My Team
I would love to be your demonstrator if you don’t already have one and live in the UK. I would also be delighted to send you a catalogue if you do not have a demonstrator. I would be happy to place an order for you, or you can order directly by clicking on the “shop online” button.
Contact me for information about joining my team or click on the ‘Join My Team’ button
Details of the products I used for this project can be found below.
Hello and welcome to the Ink & Inspirations Blog Hop where we are working with a picture/colour challenge. I have made my card using the pretty Fragrant Layers stamp set.
I created the fragrant blossoms card using the following supplies:
Pretty In Pink card base – 8¼” by 5⅞” scored at 4⅛” on the long side Shaded Spruce – 4⅝” by 2⅞” Basic White – 4½” by 2¾” Basic White – 5½” by 3¾” for the inside Scrap Basic White and Shaded Spruce
I stamped in the upper left and lower right corners of the Pretty In Pink card front using Pretty In Pink ink.
www.crafty-rootes.co.uk – The Fragrant Layers stamp used with the Spotlight on Nature dies to make a pretty floral greetings card – Ink & Inspirations Blog Hop
The same image was then stamped again in Memento Tuxedo Black ink onto the small panel of Basic White card.
www.crafty-rootes.co.uk – The Fragrant Layers stamp used with the Spotlight on Nature dies to make a pretty floral greetings card – Ink & Inspirations Blog Hop
Using washi tape I masked off the buds at the top and bottom of the infill image, inked the image up with Pretty In Pink ink, removed the washi tape and stamped it down. I masked off the large flowers in the same way, inked up the buds with lemon Lolly ink, removed the tape and stamped the colour down.
www.crafty-rootes.co.uk – The Fragrant Layers stamp used with the Spotlight on Nature dies to make a pretty floral greetings card – Ink & Inspirations Blog Hop
The flower centres were then stamped with Gorgeous Grape ink and add colour to the leaves using Garden Green or Shaded Spruce ink. The stamped panel was then glued to the Shaded Spruce layer and the whole piece was added to the card front on Dimensionals.
www.crafty-rootes.co.uk – The Fragrant Layers stamp used with the Spotlight on Nature dies to make a pretty floral greetings card – Ink & Inspirations Blog Hop
The sentiment was stamped in Gorgeous Grape ink on scrap Basic White card which was die cut using the Spotlight On Nature Dies. Using the Stylish Shapes Dies I die cut a slightly larger circle from scrap Shaded Spruce card and adhered it to the back of the white circle. This was then added to the card front/
www.crafty-rootes.co.uk – The Fragrant Layers stamp used with the Spotlight on Nature dies to make a pretty floral greetings card – Ink & Inspirations Blog Hop
A trio of 2025 – 2027 In Color Flat Pearls finished the card.
Hop on to see what my fellow demos have created using this colour combo.
I would love to be your demonstrator if you don’t already have one and live in the UK. I would also be delighted to send you a catalogue if you do not have a demonstrator. I would be happy to place an order for you, or you can order directly by clicking on the “shop online” button.
Contact me for information about joining my team or click on the ‘Join My Team’ button
Details of the products I used for this project can be found below.
Today I am sharing the cards I designed for my March Stamp-A-Stack using the gorgeous Petals of Beauty stamp set and co-ordinating dies. I designed 10 cards, and the ladies make 2 of each design.
Each attendee’s pack contained the Petals of Beauty stamp set and dies. A pack of 2024 – 2026 In Color Flat Pearls, 5 ink spots filled with Pool Party, Soft Sea Foam, Petunia Pop, Timid Tiger, Night of Navy inks, 20 Envelopes, 20 card bases and all the layers, embossed and die cut pieces to create the cards.
Card 1 – Collage Birthday Wishes
Petunia Pop card bases – 8¼” by 5⅞” – scored at 4⅛” x 2 Basic White – 5” by 3¼” x 2 Night of Navy – 4½” by ½” x 2 Basic White – 4½” by ½” x 2 Basic White label x 2 – die cut with Nested Essentials Basic White – 5½” by 3¾” x 2 – for the inside
www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Stamp the large solid floral image, randomly all over the 5” by 3¼” piece of Basic White with Pool Party ink. Stamp the small outline floral image, randomly all over with Night of Navy ink. Add the flower centres to the Night of Navy flowers with Petunia Pop ink. Glue the Night of Navy strip to the left side, add the White strip and glue to card front. Stamp sentiment in Night of Navy onto die cut rectangle – add to card front on Dimensionals
Card 2 – Faux Silk
Pool Party card base – 8¼” by 5⅞” – scored at 4⅛” x 2 Night of Navy – 5¼” by 3½” x 2 Basic White – 5” by 3¼” x 2 Adhesive Sheet – 5” by 3¼” x 2 White Tissue Paper – minimum of 5½” by 3¾” x 2 Basic White label x 2 die cut with Nested Essentials dies Basic White card – 5½” by 3¾” x 2- for the inside
www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Stamp the outline of the small floral image, randomly all over the 5¼” by 3½ piece of Basic White with Pool Party ink. Stamp the large outline floral image, randomly all over with Night of Navy ink. Add the flower centres to all flowers with Petunia Pop ink. Apply Adhesive Sheet to the front of the stamped panel. Screw up the piece of tissue paper, open out but DON’T smooth out fully. Use to cover the exposed adhesive sheet pressing down the wrinkles and rubbing over the image.
www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Fold excess tissue paper to the back and glue down. Glue to the Night of Navy layer and then to card base. Stamp the sentiment onto die cut label with Night of Navy ink add to card front on Dimensionals.
Card 3 – Flowers on Embossed Background
Soft Sea Foam card base – 8¼” by 5⅞” scored at 4⅛” x 2 Petunia Pop – 5⅛” by 3⅜” x 2 Basic White – 5” by 3¼” x 2 – embossed Basic White – 1⅞” by ⅜” x 2 Basic White card – 5½” by 3¾” x 2- for the inside Scrap Basic White
www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Glue the embossed panel to the Petunia Pop layer and then to the Soft Sea Foam card base. Stamp the outline of the large flower with Petunia Pop ink onto scrap Basic White card then stamp the solid flower in Petunia Pop ink – stamped off once over top. Add the flower centre with Navy ink. Stamp the outline small flower with Night of Navy ink onto scrap Basic White card. Add the solid flower over top in Night of Navy – stamped off once or twice, you choose. Add the flower centres with Petunia Pop ink. Stamp leafy spray in Soft Sea Foam ink on scrap Basic White card. Die cut all the images.
Glue blue flower and leafy spray to card front and add pink flower on Dimensionals. Stamp the sentiment in Petunia Pop ink on the strip of white and add to card front.
Card 4 – Floral Birthday
Timid Tiger card base – 8¼” by 5⅞” – scored at 4⅛” x 2 Night of Navy – 5⅛” by 3⅜” x 2 Basic White – 5” by 3¼” x 2 Basic White label – die cut with Nested Essentials x 2 Basic White – 5½” by 3¾”” x 2 for the inside
www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Stamp the Outline large Flower with Timid Tiger ink on the smaller White card panel
Stamp the solid large flower in Timid Tiger ink – stamped off once. Add the flower centre with Navy ink. Stamp the outline small flower with Petunia Pop ink, add the solid small flower in Petunia Pop ink – stamped off once and add flower centre with Navy ink.
Stamp the leafy sprig against each flower with Soft Sea Foam ink. Add the trio of small flowers randomly with Night of Navy ink. Glue the stamped panel to the Night of Navy layer then to the card front. Stamp the sentiment on the label with Night of Navy ink. Add on Dimensionals.
Card 5 – Double Orange Flowers
Petunia Pop card base – 8¼” by 5⅞” – scored at 4⅛” x 2 Basic White – 5½” by 3¾” – x 4 – 2 for the inside Timid Tiger – 5⅛” by 3⅜” – x 2 Basic White – 5” by 3¼” Soft Sea Foam – 3¾” by 2” Vellum – 4” by 1¾” Scrap Basic White
www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Stamp the Cluster of small flowers down the left-hand edge of the smaller Basic White panel with Soft Sea Foam ink. Stamp the sentiment in the bottom right corner in Petunia Pop ink.
Glue the panel to the Timid Tiger Layer and then to the Petunia Pop card front.
Stamp the leaf in Soft Sea Foam ink on the Soft Sea Foam card and add the panel to the card front on Dimensionals. Die cut the Vellum Leaf and tuck behind.
Stamp the Outline large & small Flower with Timid Tiger ink on the scrap White card and add the solid flowers in Timid Tiger ink – stamped off once. Add the flower centres with Petunia Pop ink. Die cut the flowers and add to the card front.
Card 6 – Inter-layered Leaves
Night of Navy card base – 8¼” by 5⅞” – scored at 4⅛” x 2 Soft Sea Foam – 5⅛” by 3⅜” x 2 Basic White – 5” by 3¼” x 2 – Embossed using Timeworn Type Embossing Folder Basic White labels x 2 – die cut with Nested Essentials Dies Basic White – 5½” by 3¾” x 2 – for the inside Soft Sea Foam, Pool Party & Night of Navy 8¼” by 3½” piece of each
www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Die cut 2 leafy sprigs in each of the three colours. Glue the leafy sprigs onto the embossed panels and trim off the excess. Glue the panel to the Soft Sea Foam layer and then to the Night of Navy card base. Stamp the sentiment in Night of Navy ink onto the die cut label and add to card front on Dimensionals.
Card 7 – Petunia Petals Flowers
Timid Tiger card bases – 8¼” by 5⅞” – scored at 4⅛” x 2 Petunia Pop – 5⅞” by 2” x 2 Basic White – 5⅞” by ⅜” x 4 Basic White – Circles x 2 – die cut using the Spotlight on Nature Dies Basic White – 5½” by 3¾” x 2 – for the inside Scrap Basic White
www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Stamp the cluster of small flowers in a row, ½” from the top and bottom of the Timid Tiger card front. Stamp the large solid flower in Petunia Pop ink onto the Petunia Pop card. Glue a strip of White on either side and glue to the Timid Tiger card front. Stamp the sentiment with Night of Navy ink onto the die cut circle and add to the card front on Dimensionals.
Stamp the Outline large & small Flower with Petunia Pop ink on the scrap White card, add the solid flowers in Timid Tiger ink – stamped off once. Add the flower centres with Night of Navy ink. Stamp the solid leaf image in stamped off Soft Sea Foam on scrap White card and add the ‘veining’ in full strength Soft Sea Foam. Die cut the flowers and leaves and add to the card front.
Card 8 – Paper-Pieced Leaves
1 Night of Navy and 1 Pool Party card base – 8¼” by 5⅞” – scored at 4⅛”
1 Night of Navy and 1 Pool Party layer – 5⅛” by 3⅜”
Basic White – 5” by 3¼” x 2
Night of Navy and Pool Party – 4⅜” by 1¾” x 2 with Adhesive Sheet applied to the back
Basic White – 5½” by 3¾” x 2 – for the inside
www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Die cut the leafy spray from the smaller pieces of Pool Party and Night of Navy card with adhesive on the back. Adhere the outline leafy spray, one on each piece of 5” by 3¼” Basic White card. Piece the leaf shapes into the spaces of both cards. Stamp the sentiment in Night of Navy ink. Adhere the white panels to the Navy or Pool Party layers then to the opposite colour card base.
Card 9 – Double Petunia Pop Flowers
Soft Sea Foam card base – 8¼” by 5⅞” – scored at 4⅛” x 2 Soft Sea Foam – 5⅜” by 3⅝” – embossed with Timeworn Type Embossing Folder and cut in half at an angle Night of Navy – 5⅞” by ⅛” x 2 Basic White – 5½” by 3¾” x 4 – 2 for the inside Scrap Basic White & Night of Navy
www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Adhere the embossed panel to one of the Basic White pieces, add the strip of Night of Navy card along the top edge and glue the whole panel to the Soft Sea Foam card base.
Stamp the Outline large & small Flower with Petunia Pop ink on the scrap White card, add the solid image in Petunia Pop ink – stamped off once. Add the flower centres with Night of Navy ink. Stamp the solid leaf image in Soft Sea Foam on scrap White card. Die cut the flowers and leaves and 2 veining pieces in Night of Navy. Add the flowers to the card front and tuck the leaves and veining behind. Stamp the sentiment in Navy ink.
Card 10 – Outline Flowers
Pool Party card base – 8¼” by 5⅞” – scored at 4⅛” x 2 Timid Tiger – 5⅛” by 3⅜” x 2 Basic White – 5” by 3¼” x 2 Petunia Pop – 5” by ⅜” x 4 Basic White – 5 ½” by 3 ¾” x 2 – for the inside Basic White – 7¼” by 3” – with Adhesive Sheet Scrap Basic White with Adhesive Sheet Scrap Basic White
www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Stamp the outline large & small flowers, randomly on the 7” by 3” Basic White panel. The large in Petunia Pop and the small in Timid Tiger – see picture below.
www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Die cut the outline of 2 large and 2 small flowers from the stamped panel. From scrap Basic White die cut 2 outline flowers. Adhere them together and add the patterned piece on top. Repeat this with the smaller flowers. Randomly stamp the cluster of small flowers in Pool Party ink onto the smaller panel of White. Glue stamped panel to the Timid Tiger layer.
www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Order goodies/Join My Team
I would love to be your demonstrator if you don’t already have one and live in the UK. I would also be delighted to send you a catalogue if you do not have a demonstrator. I would be happy to place an order for you, or you can order directly by clicking on the “shop online” button.
Contact me for information about joining my team or click on the ‘Join My Team’ button
Details of the products I used for this project can be found below.
Today I am sharing a pretty vase of lavender coloured daisies made using the Pop-up Petals stamp set and dies with a label from the Beautifully Created dies.
I created the lavender coloured daisies card using the following supplies:
Highland Heather card base – 8¼” by 5⅞” scored at 4⅛” on the long side Basic White card – 4¾” by 3¼” Perennial Lavender dsp – 4⅝” by 3⅛” Basic White card – 3¾” by 3” Basic White card – 5½” by 3¾” for the inside Scrap Basic White card
Using the infill daisy petal image, I stamped in the upper left and lower right corners of the Highland Heather card front using Highland Heather ink.
www.crafty-rootes.co.uk -The Pop-up Petals stamp set and co-ordinating dies used with Beautifully Created dies and the Perennial Lavender designer series paper to make a thank you card
The panel of designer series paper was adhered to the 4¾” by 3¼” piece of Basic White card. I wrapped a length of White Ribbon around the panel and glued the whole thing to the Highland Heather card front.
www.crafty-rootes.co.uk -The Pop-up Petals stamp set and co-ordinating dies used with Beautifully Created dies and the Perennial Lavender designer series paper to make a thank you card
I die cut a label from the smallest piece of Basic White card using the Beautifully Created dies. This was added to the card front using Mini Glue Dots.
www.crafty-rootes.co.uk -The Pop-up Petals stamp set and co-ordinating dies used with Beautifully Created dies and the Perennial Lavender designer series paper to make a thank you card
On scrap Basic White card, I stamped the flowerpot with Crumb Cake ink. The daisies and tulips were then stamped on scrap card using Secret Sea ink. These images were all die cut using the Pop-up Petals dies.
www.crafty-rootes.co.uk -The Pop-up Petals stamp set and co-ordinating dies used with Beautifully Created dies and the Perennial Lavender designer series paper to make a thank you card
The daisy petals were stamped with Highland Heather and the flower centres with 2nd generation Crumb Cake ink. The leaves were coloured using Lemon Lime Twist Blends Pens. The tulips were coloured using Strawberry Slush and Granny Apple Green Blends Pens. These were added to the card front on Dimensionals.
www.crafty-rootes.co.uk -The Pop-up Petals stamp set and co-ordinating dies used with Beautifully Created dies and the Perennial Lavender designer series paper to make a thank you card
The sentiment, from the Thankful Garden stamp set was stamped in Secret Sea ink on scrap Basic White card. I trimmed it out and added it to the card front. A trio of retired Lemon Lime Twist Sequins from my stash finished the card.
Order goodies/Join My Team
I would love to be your demonstrator if you don’t already have one and live in the UK. I would also be delighted to send you a catalogue if you do not have a demonstrator. I would be happy to place an order for you, or you can order directly by clicking on the “shop online” button.
Contact me for information about joining my team or click on the ‘Join My Team’ button
Details of the products I used for this project can be found below.
Hello and welcome to the Share It Sunday Blog Hop where we are sharing something we have been working on recently. I am sharing the card I made to celebrate a friends recent baptism using the new Petals of Beauty stamp set.
Berry Burst card base – 8 ¼” by 5⅞” scored at 4⅛” Secret Sea card – 5⅜” by 3⅝” Basic White card – 5⅛” by 3⅜” Basic White card – 3½” by 2¼” Basic White card – 5½” by 3¾” for the inside
Using Berry Burst ink, I stamped the outline large flower image, twice onto the 5⅛” by 3⅜” piece of Basic White card. The infill colour was added with 2nd generation Berry Burst ink.
www.crafty-rootes.co.uk – The Petals of Beauty stamp set used To make a striking Baptismal celebration card for a friend – Share It Sunday Blog Hop
Three smaller flowers were then added, the outline in Gorgeous Grape ink and the infill with 2nd generation Gorgeous Grape ink. The leafy sprig was the stamped three times with garden Green ink.
www.crafty-rootes.co.uk – The Petals of Beauty stamp set used To make a striking Baptismal celebration card for a friend – Share It Sunday Blog Hop
The sentiment, from the Layers of Beauty stamp set was stamped in Secret Sea ink along the bottom of the panel which was then glued to the Secret Sea panel and then to the Berry Burst card front.
www.crafty-rootes.co.uk – The Petals of Beauty stamp set used To make a striking Baptismal celebration card for a friend – Share It Sunday Blog Hop
Using my Paper Trimmer, I cut a cross shape into the 3½” by 2¼” panel of Basic White card. This was added to the card front on Dimensionals.
www.crafty-rootes.co.uk – The Petals of Beauty stamp set used To make a striking Baptismal celebration card for a friend – Share It Sunday Blog Hop
A trio of dots completed the card.
www.crafty-rootes.co.uk – The Petals of Beauty stamp set used To make a striking Baptismal celebration card for a friend – Share It Sunday Blog Hop
Please hop on to see what my fellow crafters have been using lately.
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Hello and welcome to the Stamping Dreams blog hop where we are sharing projects inspired by leaves. I have used the pretty Branching Out stamp set to make my card, I think pine needles count as leaves, don’t you?
To recreate the branching out card, you will need:
Gray Granite card base – 8¼” by 5⅞” – scored at 4⅛” Lost Lagoon card – 4¾” by 3½” Basic White card – 4½” by 3¼” Pecan Pie card – 1¼” by ½” Basic White card – 5½” by 3¾” for the inside
I stamped the trio of leaves in the upper left and lower right corners of the Gray Granite card front with Gray Granite ink.
www.crafty-rootes.co.uk – The Branching Out stamp set and co-ordinating Dies used to make a thank you card featuring pine boughs – Stamping Dreams Blog Hop
Using the Branching Out Dies, I die cut a label from the panel of Lost Lagoon and a smaller label from the smaller panel of Basic White card.
www.crafty-rootes.co.uk – The Branching Out stamp set and co-ordinating Dies used to make a thank you card featuring pine boughs – Stamping Dreams Blog Hop
On the white label, I stamped the larger branch with Gray Granite ink. The leaves were stamped with Lost Lagoon ink.
I added the small pinecones with Pecan Pie ink. The labels were then glued together and mounted onto the Gray Granite card base on Dimensionals.
www.crafty-rootes.co.uk – The Branching Out stamp set and co-ordinating Dies used to make a thank you card featuring pine boughs – Stamping Dreams Blog Hop
The sentiment, from the Inspiring Imperfections stamp set, was stamped on the small piece of Pecan Pie card with Versamark ink. I covered the ink with White Embossing Powder and set it using my Heat Tool before being added to the card front.
www.crafty-rootes.co.uk – The Branching Out stamp set and co-ordinating Dies used to make a thank you card featuring pine boughs – Stamping Dreams Blog Hop
A trio of Dappled Dots from my stash finished the card.
www.crafty-rootes.co.uk – The Branching Out stamp set and co-ordinating Dies used to make a thank you card featuring pine boughs – Stamping Dreams Blog Hop
Please hop on to see what my fellow demos have created to share with us today.
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
To recreate the twisted in time card you will need:
Gray Granite card base – 8¼” by 5⅞” – scored at 4⅛” Garden Green card – 4⅞” by 3⅜” Basic White card – 5” by 3½” Basic White card – 1¾” by ⅜” Basic White card – 5½” by 3¾”
From the 5” by 3½” panel of Basic White card I die cut a rectangle using the Textured Notes Dies.
www.crafty-rootes.co.uk – The Twisted in Time, Scenic Adventure and Darling Dinos stamp sets with the Textured Notes dies used to make a pretty tree themed card
Using Early Espresso ink, I stamped the tree trunk onto the die cut rectangle. I added the canopy with Garden Green ink and stamped the leaves with Mossy Meadow ink.
www.crafty-rootes.co.uk – The Twisted in Time, Scenic Adventure and Darling Dinos stamp sets with the Textured Notes dies used to make a pretty tree themed card
The rocks from the Darling Dinos stamp set were stamped in Gray Granite ink and coloured them in using the Gray Granite Blends Pens. The ‘grass’ from the same stamp set was added in 1st, 2nd and 3rd generation Granny Apple Green ink.
www.crafty-rootes.co.uk – The Twisted in Time, Scenic Adventure and Darling Dinos stamp sets with the Textured Notes dies used to make a pretty tree themed card
I used the ‘water’ image from the Scenic Adventure stamp set to bring the grass down to the bottom of the die cut piece. I added Cloud Cover ink with a Blending Brush to give some colour to the sky. The whole piece was glued to the Garden Green panel before being added to the Gray Granite card front on Dimensionals.
www.crafty-rootes.co.uk – The Twisted in Time, Scenic Adventure and Darling Dinos stamp sets with the Textured Notes dies used to make a pretty tree themed card
The sentiment, from the Darling Dinos stamp set, was stamped in Garden Green ink onto the small strip of Basic White card. It was then added to the card front. A trio of Transparent Adhesive Backed Dots finished the card.
www.crafty-rootes.co.uk – The Twisted in Time, Scenic Adventure and Darling Dinos stamp sets with the Textured Notes dies used to make a pretty tree themed card
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Hello and welcome to the Technique Tuesday Blog Hop where we are sharing one-layer cards. I have used the new Impressions Abloom stamp set to make a clean and simple card.
To recreate the impressions abloom card, you will need:
Thick Basic White card base – 8¼” by 5⅞” scored at 4⅛”
Using Darling Duckling ink, I stamped the detailed image from the largest flower, once at the top and twice at the bottom of the Thick Basic White card base. The solid image of the same image was then inked up, stamped off onto scrap paper then stamped over the detailed image to give the two-tone look.
www.crafty-rootes.co.uk – The pretty Impressions Abloom stamp set used to make a single layer, clean and simple card – Technique Tuesday Blog Hop
I stamped the detailed daisy image at the top and the bottom of the card base in Petunia Pop ink and added the solid image with stamped off Petunia Pop ink.
www.crafty-rootes.co.uk – The pretty Impressions Abloom stamp set used to make a single layer, clean and simple card – Technique Tuesday Blog Hop
The detailed leaf was added with Summer Splash ink.
www.crafty-rootes.co.uk – The pretty Impressions Abloom stamp set used to make a single layer, clean and simple card – Technique Tuesday Blog Hop
Using Petunia Pop ink I stamped the word ‘thanks’ and added the ‘so very much’ with Summer Splash ink.
www.crafty-rootes.co.uk – The pretty Impressions Abloom stamp set used to make a single layer, clean and simple card – Technique Tuesday Blog Hop
A trio of Adhesive-backed Pearl’s finished the card.
www.crafty-rootes.co.uk – The pretty Impressions Abloom stamp set used to make a single layer, clean and simple card – Technique Tuesday Blog Hop
Please hop on to share the inspiration created by my crafty friends.
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Hello and welcome to the Stamping With Friends Blog Hop where we are sharing projects made using products from the new January to April 2025 Mini Catalogue. I have chosen to make a card using the Ocean Friends stamp set.
To recreate the trio of crab’s card, you will need:
Smoky Slate card base – 8¼” by 5⅞” – scored at 4⅛” Lost Lagoon card – 5⅛” by 3⅜” Basic White card – 5” by 3¼” Lost Lagoon card – 2⅝” by ½” Basic White card – 5½” by 3¾” – for the inside
Using one of the bubble images I stamped around the Smoky Slate card front using Smoky Slate ink, just to give some added texture.
www.crafty-rootes.com – The Ocean Friends stamp set from Stampin’ Up! used to make a trio of crabs themed card
In the centre of the smaller panel of Basic White card I stamped the outline crab image in Cajun Craze ink. I used the infill image to colour the crab using Calypso Coral ink.
www.crafty-rootes.com – The Ocean Friends stamp set from Stampin’ Up! used to make a trio of crabs themed card
The outline crab was stamped again in Granny Apple Green ink and coloured with Lemon Lime Twist ink. Finally, I stamped the outline again in Pretty Peacock with the infill stamped in Lost Lagoon ink.
www.crafty-rootes.com – The Ocean Friends stamp set from Stampin’ Up! used to make a trio of crabs themed card
I added scattering of both bubble images around the crabs using Smoky Slate ink. The stamped panel was glued to the Lost lagoon layer and the whole piece was added to the Smoky Slate card front on Dimensionals.
www.crafty-rootes.com – The Ocean Friends stamp set from Stampin’ Up! used to make a trio of crabs themed card
The sentiment was stamped in Versamark ink onto the small strip of Lost Lagoon card. I covered it with White Embossing Powder and set it using my Heat Tool. The sentiment was then added to the card front.
www.crafty-rootes.com – The Ocean Friends stamp set from Stampin’ Up! used to make a trio of crabs themed card
A trio of Basic Gray & Smoky Slate Pearls finished the card.
Please hop on to share the projects created by my crafty friends.
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Hello and welcome to the Crafty Challenge Blog Hop where we have a colour challenge to work with. I have used the Love For You stamp set which will be retiring at the end of April.
Flirty Flamingo card base – 8¼” by 5⅞” – scored at 4⅛” – Rounded upper left corner Garden Green card – 5⅜” by 3⅝” – Rounded upper left corner Basic White card – 5¼” by 3½” – Rounded upper left corner Flirty Flaming card – 2¾” by 2¾” Basic White card – 5½” by 3¾” – Rounded upper left corner – for the inside
I began by die cutting a circle from the square of Flirty Flamingo card using the Stylish Shapes Dies. I placed the die cut circle onto the 5¼” by 3½” piece of Basic White card, slightly overhanging the right edge. I drew around it with a pencil.
www.crafty-rootes.com – A boldly dramatic floral birthday card made using the Love For You stamp set for the Crafty Challenge Blog Hop
The flowers and leaves from the Love For You stamp set were then stamped, overlapping the pencil circle. The detail of the largest flower was stamped with Berry Burst ink and the solid image adde in Calypso Coral ink.
www.crafty-rootes.com – A boldly dramatic floral birthday card made using the Love For You stamp set for the Crafty Challenge Blog Hop
The smaller flower was stamped with Calypso Coral for the detail and stamped off Crushed Curry for the background. The leaves were stamped with Garden Green ink, the detail in full strength and the background in stamped of ink. The pencil circle was then rubbed out.
www.crafty-rootes.com – A boldly dramatic floral birthday card made using the Love For You stamp set for the Crafty Challenge Blog Hop
I glued the decorated panel to the Garden Green layer and wrapped a length of Garden Green Ribbon around the layer before adhering the whole piece to the Flirty Flamingo card front.
www.crafty-rootes.com – A boldly dramatic floral birthday card made using the Love For You stamp set for the Crafty Challenge Blog Hop
The sentiment, from the Textured Floral stamp set, was stamped onto the die cut Flirty Flaming circle using Memento Tuxedo Black ink. A small piece was trimmed off the right side of the circle and the sentiment was mounted onto the card front on Dimensionals.
www.crafty-rootes.com – A boldly dramatic floral birthday card made using the Love For You stamp set for the Crafty Challenge Blog Hop
A scattering of Adhesive-backed Shiny Sequins finished the card.
Please hop along to see what my fellow crafters have made using this bold colour palette.
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Mo x
Supplies used:
Loading Comments...
By continuing to use the site, you agree to the use of cookies. more information
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.
