Petals of Beauty Stamp-a-Stack

Today I am sharing the cards I designed for my March Stamp-A-Stack using the gorgeous Petals of Beauty stamp set and co-ordinating dies. I designed 10 cards, and the ladies make 2 of each design.

Colours used to make these cards are:

 

Each attendee’s pack contained the Petals of Beauty stamp set and dies. A pack of 2024 – 2026 In Color Flat Pearls, 5 ink spots filled with Pool Party, Soft Sea Foam, Petunia Pop, Timid Tiger, Night of Navy inks, 20 Envelopes, 20 card bases and all the layers, embossed and die cut pieces to create the cards.

Card 1 – Collage Birthday Wishes

Petunia Pop card bases – 8¼” by 5⅞” – scored at 4⅛” x 2
Basic White – 5” by 3¼” x 2
Night of Navy – 4½” by ½” x 2
Basic White – 4½” by ½” x 2
Basic White label x 2 – die cut with Nested Essentials
Basic White – 5½” by 3¾” x 2 – for the inside

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Stamp the large solid floral image, randomly all over the 5” by 3¼” piece of Basic White with Pool Party ink. Stamp the small outline floral image, randomly all over with Night of Navy ink. Add the flower centres to the Night of Navy flowers with Petunia Pop ink. Glue the Night of Navy strip to the left side, add the White strip and glue to card front. Stamp sentiment in Night of Navy onto die cut rectangle – add to card front on Dimensionals

Card 2 – Faux Silk

Pool Party card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Night of Navy – 5¼” by 3½” x 2
Basic White – 5” by 3¼” x 2
Adhesive Sheet – 5” by 3¼” x 2
White Tissue Paper – minimum of 5½” by 3¾” x 2
Basic White label x 2 die cut with Nested Essentials dies
Basic White card – 5½” by 3¾” x 2- for the inside

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Stamp the outline of the small floral image, randomly all over the 5¼” by 3½ piece of Basic White with Pool Party ink. Stamp the large outline floral image, randomly all over with Night of Navy ink. Add the flower centres to all flowers with Petunia Pop ink. Apply Adhesive Sheet to the front of the stamped panel. Screw up the piece of tissue paper, open out but DON’T smooth out fully. Use to cover the exposed adhesive sheet pressing down the wrinkles and rubbing over the image.

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Fold excess tissue paper to the back and glue down. Glue to the Night of Navy layer and then to card base. Stamp the sentiment onto die cut label with Night of Navy ink add to card front on Dimensionals.

Card 3 – Flowers on Embossed Background

Soft Sea Foam card base – 8¼” by 5⅞” scored at 4⅛” x 2
Petunia Pop – 5⅛” by 3⅜” x 2
Basic White – 5” by 3¼” x 2 – embossed
Basic White – 1⅞” by ⅜” x 2
Basic White card – 5½” by 3¾” x 2- for the inside
Scrap Basic White

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Glue the embossed panel to the Petunia Pop layer and then to the Soft Sea Foam card base. Stamp the outline of the large flower with Petunia Pop ink onto scrap Basic White card then stamp the solid flower in Petunia Pop ink – stamped off once over top. Add the flower centre with Navy ink. Stamp the outline small flower with Night of Navy ink onto scrap Basic White card. Add the solid flower over top in Night of Navy – stamped off once or twice, you choose. Add the flower centres with Petunia Pop ink. Stamp leafy spray in Soft Sea Foam ink on scrap Basic White card. Die cut all the images.

Glue blue flower and leafy spray to card front and add pink flower on Dimensionals. Stamp the sentiment in Petunia Pop ink on the strip of white and add to card front.

Card 4 – Floral Birthday

Timid Tiger card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Night of Navy – 5⅛” by 3⅜” x 2
Basic White – 5” by 3¼” x 2
Basic White label – die cut with Nested Essentials x 2
Basic White – 5½” by 3¾”” x 2 for the inside

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Stamp the Outline large Flower with Timid Tiger ink on the smaller White card panel

Stamp the solid large flower in Timid Tiger ink – stamped off once. Add the flower centre with Navy ink. Stamp the outline small flower with Petunia Pop ink, add the solid small flower in Petunia Pop ink – stamped off once and add flower centre with Navy ink.

Stamp the leafy sprig against each flower with Soft Sea Foam ink. Add the trio of small flowers randomly with Night of Navy ink. Glue the stamped panel to the Night of Navy layer then to the card front. Stamp the sentiment on the label with Night of Navy ink. Add on Dimensionals.

Card 5 – Double Orange Flowers

Petunia Pop card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Basic White – 5½” by 3¾” – x 4 – 2 for the inside
Timid Tiger – 5⅛” by 3⅜” – x 2
Basic White – 5” by 3¼”
Soft Sea Foam – 3¾” by 2”
Vellum – 4” by 1¾”
Scrap Basic White

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Stamp the Cluster of small flowers down the left-hand edge of the smaller Basic White panel with Soft Sea Foam ink. Stamp the sentiment in the bottom right corner in Petunia Pop ink.

Glue the panel to the Timid Tiger Layer and then to the Petunia Pop card front.

Stamp the leaf in Soft Sea Foam ink on the Soft Sea Foam card and add the panel to the card front on Dimensionals. Die cut the Vellum Leaf and tuck behind.

Stamp the Outline large & small Flower with Timid Tiger ink on the scrap White card and add the solid flowers in Timid Tiger ink – stamped off once.  Add the flower centres with Petunia Pop ink. Die cut the flowers and add to the card front.

Card 6 – Inter-layered Leaves

Night of Navy card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Soft Sea Foam – 5⅛” by 3⅜” x 2
Basic White – 5” by 3¼” x 2 – Embossed using Timeworn Type Embossing Folder
Basic White labels x 2 – die cut with Nested Essentials Dies
Basic White – 5½” by 3¾” x 2 – for the inside
Soft Sea Foam, Pool Party & Night of Navy 8¼” by 3½” piece of each

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Die cut 2 leafy sprigs in each of the three colours. Glue the leafy sprigs onto the embossed panels and trim off the excess. Glue the panel to the Soft Sea Foam layer and then to the Night of Navy card base. Stamp the sentiment in Night of Navy ink onto the die cut label and add to card front on Dimensionals.

Card 7 – Petunia Petals Flowers

Timid Tiger card bases – 8¼” by 5⅞” – scored at 4⅛” x 2
Petunia Pop – 5⅞” by 2” x 2
Basic White – 5⅞” by ⅜” x 4
Basic White – Circles x 2 – die cut using the Spotlight on Nature Dies
Basic White – 5½” by 3¾” x 2 – for the inside
Scrap Basic White

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Stamp the cluster of small flowers in a row, ½” from the top and bottom of the Timid Tiger card front. Stamp the large solid flower in Petunia Pop ink onto the Petunia Pop card. Glue a strip of White on either side and glue to the Timid Tiger card front. Stamp the sentiment with Night of Navy ink onto the die cut circle and add to the card front on Dimensionals.

Stamp the Outline large & small Flower with Petunia Pop ink on the scrap White card, add the solid flowers in Timid Tiger ink – stamped off once. Add the flower centres with Night of Navy ink. Stamp the solid leaf image in stamped off Soft Sea Foam on scrap White card and add the ‘veining’ in full strength Soft Sea Foam. Die cut the flowers and leaves and add to the card front.

Card 8 – Paper-Pieced Leaves

1 Night of Navy and 1 Pool Party card base – 8¼” by 5⅞” – scored at 4⅛”
1 Night of Navy and 1 Pool Party layer – 5⅛” by 3⅜”
Basic White – 5” by 3¼” x 2
Night of Navy and Pool Party – 4⅜” by 1¾” x 2 with Adhesive Sheet applied to the back
Basic White – 5½” by 3¾” x 2 – for the inside

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Die cut the leafy spray from the smaller pieces of Pool Party and Night of Navy card with adhesive on the back. Adhere the outline leafy spray, one on each piece of 5” by 3¼” Basic White card. Piece the leaf shapes into the spaces of both cards. Stamp the sentiment in Night of Navy ink. Adhere the white panels to the Navy or Pool Party layers then to the opposite colour card base.

Card 9 – Double Petunia Pop Flowers

Soft Sea Foam card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Soft Sea Foam – 5⅜” by 3⅝” – embossed with Timeworn Type Embossing Folder and cut in half at an angle
Night of Navy – 5⅞” by ⅛” x 2
Basic White – 5½” by 3¾” x 4 – 2 for the inside
Scrap Basic White & Night of Navy

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Adhere the embossed panel to one of the Basic White pieces, add the strip of Night of Navy card along the top edge and glue the whole panel to the Soft Sea Foam card base.

Stamp the Outline large & small Flower with Petunia Pop ink on the scrap White card, add the solid image in Petunia Pop ink – stamped off once. Add the flower centres with Night of Navy ink. Stamp the solid leaf image in Soft Sea Foam on scrap White card. Die cut the flowers and leaves and 2 veining pieces in Night of Navy. Add the flowers to the card front and tuck the leaves and veining behind. Stamp the sentiment in Navy ink.

Card 10 – Outline Flowers

Pool Party card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Timid Tiger – 5⅛” by 3⅜” x 2
Basic White – 5” by 3¼” x 2
Petunia Pop – 5” by ⅜” x 4
Basic White – 5 ½” by 3 ¾” x 2 – for the inside
Basic White – 7¼” by 3” – with Adhesive Sheet
Scrap Basic White with Adhesive Sheet
Scrap Basic White

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Stamp the outline large & small flowers, randomly on the 7” by 3” Basic White panel. The large in Petunia Pop and the small in Timid Tiger – see picture below.

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Die cut the outline of 2 large and 2 small flowers from the stamped panel. From scrap Basic White die cut 2 outline flowers. Adhere them together and add the patterned piece on top. Repeat this with the smaller flowers. Randomly stamp the cluster of small flowers in Pool Party ink onto the smaller panel of White. Glue stamped panel to the Timid Tiger layer.

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Order goodies/Join My Team

I would love to be your demonstrator if you don’t already have one and live in the UK.  I would also be delighted to send you a catalogue if you do not have a demonstrator. I would be happy to place an order for you, or you can order directly by clicking on the “shop online” button.

 

Contact me for information about joining my team or click on the ‘Join My Team’ button

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A floral anniversary card made using the Petals of Beauty and Reason to Celebrate stamp sets from Stampin' Up!with the faux silk technique

Faux Silk Petals Card – Technique Tuesday Blog Hop

Hello and welcome to the Technique Tuesday Blog Hop where we are sharing a technique of our choice. I have used the Petals of Beauty stamp set to make a pretty card showcasing the Faux Silk technique.

Colours used to make this card are:

 

To recreate the faux silk petals card, you will need:

Bubble Bath card base – 8¼” by 5⅞” scored at 4⅛”
Basic White card – 5⅜” by 3⅝”
Blackberry Bliss card – 5⅛” by 3⅜”
Basic White card – 5” by 3¼”
Adhesive Sheet – 5” by 3¼”
White Tissue Paper – 5⅜” by 3⅝”
Basic White card – 4⅛” by ¾”
Basic White card – 5½” by 3¾” for the inside

 

Using Bubble Bath ink, I randomly stamped the large, solid flower image, randomly all over the 5” by 3¼” piece of Basic White card.

 

A floral anniversary card made using the Petals of Beauty and Reason to Celebrate stamp sets from Stampin' Up!with the faux silk technique

www.crafty-rootes.co.uk – The Petals of Beauty and Reason to Celebrate stamp sets used with the faux silk technique to make a floral anniversary card – Technique Tuesday Blog Blog

The smaller, detailed image was then randomly stamped all over the same layer with Blackberry Bliss ink. The Flower centres were added with Pretty Peacock ink.

 

A floral anniversary card made using the Petals of Beauty and Reason to Celebrate stamp sets from Stampin' Up!with the faux silk technique

www.crafty-rootes.co.uk – The Petals of Beauty and Reason to Celebrate stamp sets used with the faux silk technique to make a floral anniversary card – Technique Tuesday Blog Blog

To the stamped layer I added the 5” by 3¼” piece of Adhesive Sheet, covering the entire piece. I crumpled up the piece of White Tissue paper, opened it without smoothing it out too much and applied it to the sticky, stamped panel pressing it firmly into place and trimming off the excess. The whole panel was then adhered to the Blackberry Bliss layer.

 

A floral anniversary card made using the Petals of Beauty and Reason to Celebrate stamp sets from Stampin' Up!with the faux silk technique

www.crafty-rootes.co.uk – The Petals of Beauty and Reason to Celebrate stamp sets used with the faux silk technique to make a floral anniversary card – Technique Tuesday Blog Blog

A length of Faux Linen Ribbon was the wrapped around the 5⅜” by 3⅝” piece of Basic White card before being glued to the Bubble Bath card base.

 

A floral anniversary card made using the Petals of Beauty and Reason to Celebrate stamp sets from Stampin' Up!with the faux silk technique

www.crafty-rootes.co.uk – The Petals of Beauty and Reason to Celebrate stamp sets used with the faux silk technique to make a floral anniversary card – Technique Tuesday Blog Blog

The sentiment, from the Reason to Celebrate stamp set was stamped in Blackberry Bliss and Pretty Peacock inks onto the strip of Basic White card. I flagged both ends and added it to the card front on Dimensionals.

 

A floral anniversary card made using the Petals of Beauty and Reason to Celebrate stamp sets from Stampin' Up!with the faux silk technique

www.crafty-rootes.co.uk – The Petals of Beauty and Reason to Celebrate stamp sets used with the faux silk technique to make a floral anniversary card – Technique Tuesday Blog Blog

A ribbon bow and a trio of retired Transparent Adhesive-backed Dots finished the card.

Please hop on to see what techniques have inspired my fellow crafters.



Blog Hop Index


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A pretty floral thank you card made using the Flowers of Beauty stamp set from Stampin' Up! and the faux silk technique

Faux Silk Roses card

I have used the Flowers of Beauty stamp set and the faux silk technique to make a pretty thank you card.

Colours in this card are:

 

To recreate the flowers of beauty card, you will need:

Thick Basic White card – 8¼” by 5⅞” – scored at 4⅛”
Petunia Pop card – 5⅛” by 3⅜”
Basic White card – 5” by 3¼”
White Tissue Paper – 5 ¾” by 4”
Petunia Pop card – 4¼” by 2¼”
Basic White card – 4” by 2”

 

Using the outline large flower image, I stamped randomly over the 5” by 3¼” panel of Basic White card. The infill flower image was stamped inside each outline with Pretty In Pink ink.

I covered the whole front of the panel with glue, using a Pritt Stick.

 

A pretty floral thank you card made using the Flowers of Beauty stamp set from Stampin' Up! and the faux silk technique

www.crafty-rootes.com – The Flowers of Beauty stamp set used with the faux silk technique to make pretty floral thank you card

The piece of white tissue paper was tightly screwed up, opened up but not smoothed out and stuck over the glued panel. The wrinkles were then pressed down into the glue. The edges of the tissue paper were then folded to the back of the panel and glued in place. The whole piece was the glued to the Petunia Pop panel.

 

A pretty floral thank you card made using the Flowers of Beauty stamp set from Stampin' Up! and the faux silk technique

www.crafty-rootes.com – The Flowers of Beauty stamp set used with the faux silk technique to make pretty floral thank you card

Using a dark Petunia Pop Blends Pen, I coloured a length of White Diagonal Striped ribbon. After it dried, I cut a piece and wrapped it around, securing it on the reverse with Sellotape. The panel was then glued to the Thick Basic White card front.

 

A pretty floral thank you card made using the Flowers of Beauty stamp set from Stampin' Up! and the faux silk technique

www.crafty-rootes.com – The Flowers of Beauty stamp set used with the faux silk technique to make pretty floral thank you card

I die cut labels from the small pieces of Basic White and Petunia Pop card using the Nested Essentials Dies. The larger Petunia Pop label was slipped under the ribbon and glued in place.

 

A pretty floral thank you card made using the Flowers of Beauty stamp set from Stampin' Up! and the faux silk technique


www.crafty-rootes.com – The Flowers of Beauty stamp set used with the faux silk technique to make pretty floral thank you card

I stamped the sentiment, from the Simply Said stamp set onto the smaller label with Petunia Pop ink. This was added to the card front on Dimensionals.

 

A pretty floral thank you card made using the Flowers of Beauty stamp set from Stampin' Up! and the faux silk technique

www.crafty-rootes.com – The Flowers of Beauty stamp set used with the faux silk technique to make pretty floral thank you card

A ribbon bow and a trio of the adhesive backed pearls finished the card.

 

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used: