Watercolor shapes stamp set by Stampi' Up! used for a Masculine thank you card for the Share It Sunday Blog Hop

Masculine Shapes for the Share It Sunday Blog Hop

Posted on August 29, 2021August 26, 2021 by Mo Rootes

Hello and welcome to the Share It Sunday Blog Hop where we are sharing a project we have been working on. I am sharing a masculine shapes card today.

Colours used in this project are:

To recreate the masculine shapes card, you will need:

Mint Macaron card base – 8¼” by 5⅞” scored at 4⅛”
Smoky Slate card – 5½” by 3¾”
Basic White card – 5⅜” by 3⅝”
Basic White card – 5½” by 3¾” for the inside

www.crafty-rootes.co.uk – A quirky masculine shapes thank you card made using the Watercolor Shapes stamp set for the Share It Sunday Blog Hop

I stamped the large oval in So Saffron ink onto the smaller panel of Basic White, added the thinner oval in Mint Macaron and finally stamping the small circle in Smoky Slate ink.

This pattern, such as it is, was repeated down the length of the panel.

Mint Macaron card base - 8¼” by 5⅞” scored at 4⅛” Smoky Slate card – 5½” by 3¾” Basic White card - 5⅜” by 3⅝” Basic White card – 5½” by 3¾” for the inside

www.crafty-rootes.co.uk – A quirky masculine shapes thank you card made using the Watercolor Shapes stamp set for the Share It Sunday Blog Hop

The stamped panel was then placed in the Stamparatus and the sentiment, from the Biggest Wish stamp set, was inked up with Basic Gray ink and stamped. I used the Stamparatus so that I could restamp the sentiment to get a darker image.

www.crafty-rootes.co.uk – A quirky masculine shapes thank you card made using the Watercolor Shapes stamp set for the Share It Sunday Blog Hop

The stamped panel was added with Multipurpose Liquid Adhesive to the Smoky Slate panel. The whole piece was then added to the Mint Macaron card base on Dimensionals.

www.crafty-rootes.co.uk – A quirky masculine shapes thank you card made using the Watercolor Shapes stamp set for the Share It Sunday Blog Hop

I decorated the panel using some of the embellishments left over from the Sentimental Rose Card Kit.

www.crafty-rootes.co.uk – A quirky masculine shapes thank you card made using the Watercolor Shapes stamp set for the Share It Sunday Blog Hop

A striking card, I hope you like it.

Please hop on to see what my fellow blog hoppers have to share today.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

GDPR

Thanks for visiting my blog today, I love to read what you think of my projects so please do let me know. In line with new Data Protection Legislation (GDPR), by commenting you do so in the knowledge that your name & comment are visible to all who visit this blog and you thereby consent to the use of that personal information for that specific purpose. Please stop by again soon.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A glass cakestand full of birthday cupcakes for a sweet birthday card, made using Stampin' Up! products

Birthday Cupcakes for the Ink. Stamp. Share Blog Hop

Posted on August 28, 2021August 25, 2021 by Mo Rootes

Hello and welcome to the Ink. Stamp. Share. Blog hop where our theme is ‘Autumn/Winter Catalogue’. I have made a cute birthday cupcake card using the gorgeous Sweets & Treats stamp set. A friend has a cloche cake stand which I love so this stamp set really called to me.

The colours used in this project are:

To recreate the birthday cupcake card, you will need:

Flirty Flamingo card base – 8¼” by 5⅞” scored at 4⅛” – rounded upper right corner
Mint Macaron – 4⅜” by 3” – rounded upper right corner
Basic White – 4 ¼” by 2⅞” – rounded upper right corner
Pattern Party dsp – 5⅞” by 1¼”
Silver Foil – 5⅞” by ¼”
Basic White – 5½” by 3¾” – rounded upper right corner
Basic White – ½” strip

Using Flirty Flamingo ink, I stamped a row of cupcakes along the bottom of the Flirty Flamingo card base.

www.crafty-rootes.co.uk – A birthday card featuring a pile of yummy birthday cupcakes made using the Sweets & Treats stamp set for the Ink. Stamp. Share Blog Hop

I added the strip of Pattern Party dsp using Multipurpose Liquid Adhesive the added the strip of Silver Foil using the same glue.

www.crafty-rootes.co.uk – A birthday card featuring a pile of yummy birthday cupcakes made using the Sweets & Treats stamp set for the Ink. Stamp. Share Blog Hop

The cupcake stand and cloche from the Sweets & Treats stamp set, were stamped in Smoky Slate ink onto the smaller panel of Basic White. The stand was then coloured in using Smoky Slate Blends Markers.

www.crafty-rootes.co.uk – A birthday card featuring a pile of yummy birthday cupcakes made using the Sweets & Treats stamp set for the Ink. Stamp. Share Blog Hop

I stamped 2 cupcakes using Smoky Slate ink inside the cloche. I stamped 3 cupcakes on Post It Notes and cut them out with scissors. I used them to mask the 2 cakes I had stamped and stamped a cupcake between. The three cakes were then masked and 2 more cakes were added on top. The cupcakes were coloured using Flirty Flamingo, Mint Macaron, So Saffron, Balmy Blue & Crumb Cake Blends Markers. I coloured the inside of the cloche with the light Pool Party Blends Marker. The stamped panel was added to the Mint Macaron panel wit liquid glue and the panel was added to the card front on Dimensionals.

www.crafty-rootes.co.uk – A birthday card featuring a pile of yummy birthday cupcakes made using the Sweets & Treats stamp set for the Ink. Stamp. Share Blog Hop

The sentiment from the same stamp set was stamped on the Basic White strip in Smoky Slate ink and trimmed out and flagged using Scissors. I added a trio of Metallic Pearls to complete the card.

www.crafty-rootes.co.uk – A birthday card featuring a pile of yummy birthday cupcakes made using the Sweets & Treats stamp set for the Ink. Stamp. Share Blog Hop

I love it.

Please continue on to see what Rochelle has to share with us today.

Roll Call

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty evergreen Christmas tree themed card made using the Evergreen Elegance stamp set by Stampin' Up!

Evergreen Christmas Tree card

Posted on August 27, 2021July 22, 2021 by Mo Rootes

I really love Christmas and Christmas crafting and am sharing an evergreen Christmas tree card made using the Evergreen Elegance stamp set paired with the Natural Textiles stamp set and Scalloped Contour Dies.

Colours used in this project are:

To recreate the evergreen Christmas tree card, you will need:

Smoky Slate card base – 8¼” by 5⅞” scored at 4⅛”
Shaded Spruce card – 5⅞” by 3”
Basic White card – 5⅞” by 2¼”
Basic White card – 5½” by 3¾”
Basic Gray card – 2” by 1¼”

I inked up one of the gorgeous background stamps from the Natural Textiles stamp set in Smoky Slate ink. I stamped off twice before stamping the image down the left and right side of the Smoky Slate card front.

www.crafty-rootes.co.uk – A gorgeous evergreen trees Christmas card made for the Stampers Showcase Blog Hop and using Sale-a-Bration product

I inked the same stamp again with the same ink, stamped off once then stamped onto the strip of Basic White card. I repeated this 3 times covering the whole panel.

www.crafty-rootes.co.uk – A gorgeous evergreen trees Christmas card made for the Stampers Showcase Blog Hop and using Sale-a-Bration product

Using the tall tree, I stamped in Shaded Spruce onto the bottom of the stamped strip in 1^st and 2^nd generation ink. This step was repeated to fill up the bottom of the panel.

Using the Scalloped Contour Dies, I cut the scalloped border using the Shaded Spruce card and added it behind the stamped layer using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – A gorgeous evergreen trees Christmas card made for the Stampers Showcase Blog Hop and using Sale-a-Bration product

I wrapped a piece of Silver Mesh Ribbon around the panel and tied it in a bow, securing the bow with a Mini Glue Dot.

www.crafty-rootes.co.uk – A gorgeous evergreen trees Christmas card made for the Stampers Showcase Blog Hop and using Sale-a-Bration product

The sentiment from the For Unto Us stamp set (so happy this set has returned) was stamped in Versamark ink onto the small piece of Basic Gray card, covered in White Embossing Powder and heat set using a Heat Tool. I used a Tailor-Made Tag Die to cut out the sentiment, I actually shorted the die cut as it was too long, and added it under the bow with a Mini Glue Dot.

www.crafty-rootes.co.uk – A gorgeous evergreen trees Christmas card made for the Stampers Showcase Blog Hop and using Sale-a-Bration product

I added a trio of Holiday Rhinestones to complete the card. I love it, so pretty.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty Christmas card made for the Ink & Inspirations Blog Hop using the Textures & Frames stamp set by Stampin' Up!

Textured Baubles for the Ink & Inspirations Blog Hop

Posted on August 26, 2021August 8, 2021 by Mo Rootes

Hello and welcome to the Ink & Inspirations Blog Hop where our theme is Clean & Simple and I have chosen to make a card featuring textured baubles made using the Textures and Frames stamp set which is one of the Sale-a-Bration offerings which are free with a £45 order.

Colours used in this project are:

To recreate the textured baubles card, you will need:

Fresh Freesia card base – 8¼” by 5⅞” scored at 4⅛”
Polished Pink card – 5⅛” by 3”
Basic White card – 5” by 2⅞”
Basic White card – 5 ½” by 3 ¾” for the inside
Basic White card – 3” by ⅝”

Taking the smaller panel of Basic White card, I stamped the solid circle image from the Textures & Frames stamp set in Polished Pink ink, I added the open circle image around the outside in the same ink and ended with the stripes, again in the Polished Pink.

www.crafty-rootes.co.uk – The Textures & Frames stamp set used to make a cute textured baubles card for the Ink & Inspirations Blog Hop

I repeated the stamping with Fresh Freesia ink and So Saffron ink to create the effect of baubles.

The ‘bag’ image from the Penguin Place stamped was stamped on top of each bauble to create the hanger using Smoky Slate ink. Don’t they look great.

www.crafty-rootes.co.uk – The Textures & Frames stamp set used to make a cute textured baubles card for the Ink & Inspirations Blog Hop

The stamped panel was glued to the layer of Polished Pink card using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – The Textures & Frames stamp set used to make a cute textured baubles card for the Ink & Inspirations Blog Hop

Using Fresh Freesia ink, I stamped the snowflakes from the Penguin Place stamp set onto the Fresh Freesia card front in the upper right and lower left corners. The stamped piece was added onto the card front on Dimensionals.

www.crafty-rootes.co.uk – The Textures & Frames stamp set used to make a cute textured baubles card for the Ink & Inspirations Blog Hop

The sentiment from the Christmas to Remember stamp set was stamped in Polished Pink ink onto the strip of Basic White card and added it to the card front.

www.crafty-rootes.co.uk – The Textures & Frames stamp set used to make a cute textured baubles card for the Ink & Inspirations Blog Hop

Such a sweet card, not my original idea. I saw the bauble idea in a post by Michelle A Pollard in one of our demonstrator sites and would like to thank her for the inspiration.

Please hop on to see what the other talented demos have to share with us today.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The So Many Snowflakes dies, border dies and Simply Elegant dsp by Stampin' Up! used for a pretty Christmas card

Pretty Snowflakes card

Posted on August 22, 2021August 7, 2021 by Mo Rootes

Here is a pretty snowflakes card made using the So Many Snowflakes Dies and some of the lovely Simply Elegant designer Series Paper.

Colours used in this project are:

To recreate the pretty snowflakes card, you will need:

Basic White – 5⅞” by 3¾”
Simply Elegant dsp – 5⅞” by 2½”
Basic White 3” by 1”
Scrap Pool Party, Misty Moonlight & Fresh Freesia

Using the Basic Border Dies and my Stampin’ Cut & Emboss Machine I die cut a decorative border from the panel of Basic White card. This die cut piece was then embossed using the Tasteful Textiles Embossing Folder.

www.crafty-rootes.co.uk – A many snowflakes themed Christmas card made using the So Many Snowflakes dies, Border Dies and Simply Elegant dsp

Using Multipurpose Liquid Adhesive, I added the strip of Simply Elegant dsp to the Thick Basic White card base. The die cut panel was then added using the same liquid glue.

www.crafty-rootes.co.uk – A many snowflakes themed Christmas card made using the So Many Snowflakes dies, Border Dies and Simply Elegant dsp

I used the So Many Snowflakes Dies and the scrap Pool Party, Misty Moonlight and Fresh Freesia card to die cut a selection of the smaller snowflakes.

www.crafty-rootes.co.uk – A many snowflakes themed Christmas card made using the So Many Snowflakes dies, Border Dies and Simply Elegant dsp

I laid the snowflakes along the die cut edge, allowing them to overlap and adhered them with the liquid glue. I covered the snowflakes with Clear Wink of Stella to add a little shimmer.

www.crafty-rootes.co.uk – A many snowflakes themed Christmas card made using the So Many Snowflakes dies, Border Dies and Simply Elegant dsp

The sentiment from the Poinsettia Petals stamp set was stamped onto the ½” strip of Basic White card in Misty Moonlight ink. I added a small border of Pool Party card and added the piece to the card front on Dimensionals.

www.crafty-rootes.co.uk – A many snowflakes themed Christmas card made using the So Many Snowflakes dies, Border Dies and Simply Elegant dsp

I added a scattering of Silver Metallic Pearls to complete the card.

So pretty, I hope you like it.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The Peaceful deer bundle and Peaceful Prints dsp by Stampin' Up! used for a pretty Christmas card

Stunning Leaping Deer card

Posted on August 20, 2021August 7, 2021 by Mo Rootes

Here is simple but stunning leaping deer Christmas card made using the Peaceful Deer stamp set and coordinating Deer Builder die and Peaceful Prints dsp.

Colours used in this project are:

To recreate the stunning leaping deer card, you will need:

Evening Evergreen card base – 8¼” by 5⅞” scored at 4⅛” – rounded upper left corner
Basic White card – 5⅝” by 3⅞” – rounded upper left corner
Peaceful Prints dsp – 5½” by 3¾” – rounded upper left corner
Basic White card – 4½” by 3” – rounded upper left corner
Be Dazzling Speciality dsp – 5⅞” by ⅜”
Basic White card – ¼” strip
Basic White card – 5½” by 3¾” – rounded upper left corner

The panel of Peaceful Prints dsp was glued to the largest panel of Basic White card using Multipurpose Liquid Adhesive. I used the same glue to adhere the panel to the Evening Evergreen card front.

www.crafty-rootes.co.uk – A cute ‘leaping deer’ Christmas card made using the Peaceful Deer stamp set, Deer Builder Punch and Peaceful Prints dsp

The strip of the gorgeous Be Dazzling Speciality dsp across the centre of the card. I love the shimmer this gives.

www.crafty-rootes.co.uk – A cute ‘leaping deer’ Christmas card made using the Peaceful Deer stamp set, Deer Builder Punch and Peaceful Prints dsp

Using Evening Evergreen ink, I stamped a selection of trees from the Peaceful Deer stamp set in 1^st and 2^nd generation ink. The stamped panel was then added to the card front on Dimensionals.

www.crafty-rootes.co.uk – A cute ‘leaping deer’ Christmas card made using the Peaceful Deer stamp set, Deer Builder Punch and Peaceful Prints dsp

I used the Deer Builder Punch to cut out one of the pretty deer images from the Peaceful Prints dsp and added it to the card front on Dimensionals.

www.crafty-rootes.co.uk – A cute ‘leaping deer’ Christmas card made using the Peaceful Deer stamp set, Deer Builder Punch and Peaceful Prints dsp

The sentiment was stamped in Cherry Cobbler ink onto the strip of Basic White card, flagged the end and added it to the card front.

www.crafty-rootes.co.uk – A cute ‘leaping deer’ Christmas card made using the Peaceful Deer stamp set, Deer Builder Punch and Peaceful Prints dsp

To finish the card, I added a bow made from White Baker’s Twine using a Mini Glue Dot. A trio of Champagne Rhinestones was added to complete the card.

I hope you like it,

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

You’re Amazing

Posted on August 17, 2021August 6, 2021 by Mo Rootes

Here is the cute and quirky ‘you’re amazing’ card designed for members of my team who have triggered a reward voucher for their sales and/or recruiting. I love making these cards and giving something back to my team for their some of their achievements.

Colours used in this project are:

To recreate the you’re amazing card, you will need:

Pale Papaya card base 8¼” by 5⅞” scored at 4⅛” – rounded upper left corner
Basic White card – 5½” by 3¾” – rounded upper left corner – x 2 – one for the inside
Scrap Basic White card
Scrap strips of Pansy Petals dsp

Using the Timeworn Type Embossing Folder and the Stampin’ Cut & Emboss Machine, I embossed one of the Basic White panels and stuck it on the Pale Papaya card front with Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – Counting Sheep stamp set and Sheep Dies used for a quirky ‘you’re amazing’ team achievement card

I added some strips of Seal + adhesive to a piece of scrap Basic White card and added the strips of Pansy Petals dsp. I used the Layering Circle dies to cut a circle out of the striped piece of card. This was added to the card front on Dimensionals.

www.crafty-rootes.co.uk – Counting Sheep stamp set and Sheep Dies used for a quirky ‘you’re amazing’ team achievement card

The sweet sheep image was stamped in Memento Tuxedo Black ink onto scrap Basic White card. It was die cut using the Sheep dies.

www.crafty-rootes.co.uk – Counting Sheep stamp set and Sheep Dies used for a quirky ‘you’re amazing’ team achievement card

I used the following Blends Marker Pens to add some colour to the sheep – Smoky Slate, Petal Pink and Ivory. The sheep was added to the card front with liquid glue at the top and Dimensionals at the bottom.

www.crafty-rootes.co.uk – Counting Sheep stamp set and Sheep Dies used for a quirky ‘you’re amazing’ team achievement card

The sentiment was stamped in the same Memento Tuxedo Black ink onto scrap Basic White card and trimmed out with Scissors. I added it to the card front with liquid glue.

www.crafty-rootes.co.uk – Counting Sheep stamp set and Sheep Dies used for a quirky ‘you’re amazing’ team achievement card

A trio of Genial Gems was added to finish the card. Lovely.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Season's Blessings stamp set and Tasteful Labels Dies by Stampin' Up! used to make a prettty note of thanks car

Note of Thanks card for the Kylie Bertucci Demo Training Blog Hop

Posted on August 16, 2021July 16, 2021 by Mo Rootes

Here is a little note of thanks made using the pretty Season’s Blessings stamp set for the Kylie Bertucci demo training blog hop. Hello and welcome to my blog and to this months hop. I hope you will hop on to see what inspirations my demo friends have to share with us today.

Colours used in this project are:

To recreate the note of thanks card, you will need:

Daffodil Delight card base – 8¼” by 5⅞” scored at 4⅛” – rounded lower left and upper right corners
Poppy Parade card – 5⅜” by 3⅝” – rounded lower left and upper right corners
Basic White card – 5¼” by 3½” – rounded lower left and upper right corners
Basic White card – 5½” by 3¾” – rounded lower left and upper right corners – for the inside
Basic White card – 3½” by 2½”

I chose a die from the Tasteful Labels Dies, placed it in the centre of the 5¼” by 3½” panel of Basic White and drew round the inside lightly with a pencil. This helps with placement of the flowers and leaves.

Season's Blessings stamp set and Tasteful Labels Dies by Stampin' Up! used to make a prety note of thanks card

www.crafty-rootes.co.uk – A pretty floral note of thanks card made using the Season’s Blessings stamp set and Tasteful Labels Dies

I selected three flowers and 2 leaves from the Season’s Blessings stamp set. The largest flower was stamped in Poppy Parade ink, slightly over lapping the drawn shape. I added the next flower in Daffodil Delight and the smallest flower in Highland Heather ink.

The leaves were stamped in Just Jade and Garden Green.

www.crafty-rootes.co.uk – A pretty floral note of thanks card made using the Season’s Blessings stamp set and Tasteful Labels Dies

Next, I added the flower centres in either Poppy Parade or Daffodil Delight and used the same flower centre in Highland Heather to add purple dots around the grouping of flowers. The whole panel was then glued to the Poppy Parade layer with Multipurpose Liquid Adhesive. I wrapped White Baker’s Twine twice around the panel, securing it on the back with Sellotape. The panel was then added to the Daffodil Delight card base with glue.

Season's Blessings stamp set and Tasteful Labels Dies by Stampin' Up! used to make a pretty note of thanks car

www.crafty-rootes.co.uk – A pretty floral note of thanks card made using the Season’s Blessings stamp set and Tasteful Labels Dies

Using my Mini Cut & Emboss Machine I die cut the chosen label from the small piece of Basic White. I stamped the sentiment in Highland Heather ink in the centre of the label and added it to the stamped panel on Dimensionals.

Season's Blessings stamp set and Tasteful Labels Dies by Stampin' Up! used to make a pretty note of thanks card

www.crafty-rootes.co.uk – A pretty floral note of thanks card made using the Season’s Blessings stamp set and Tasteful Labels Dies

I added a double bow, made using the White Baker’s Twine to the side of the die cut label and added a trio of Gold Metallic Pearls to complete the card.

www.crafty-rootes.co.uk – A pretty floral note of thanks card made using the Season’s Blessings stamp set and Tasteful Labels Dies

I hope you like it. Please hop on to see what my fellow demos have to share with us today.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Purple Dahlia

Posted on August 15, 2021August 6, 2021 by Mo Rootes

I am sharing a pretty purple dahlia thank you card today, made using the gorgeous Delicate Dahlia stamp set which is one of the free choices, with a £90 order, from the Sale-a-Bration Brochure.

Colours used in this project are:

To recreate the purple dahlia card, you will need:

Thick Basic White card base – 8¼” by 5⅞” scored at 4⅛” – rounded upper right corner
Gorgeous Grape card – 4⅝” by 3⅛” – rounded upper right corner
Basic White card – 4½” by 3” – rounded upper right corner
2021 – 2023 In Color dsp – 5⅞” by 2”
Be Dazzling Speciality Paper – 5⅞” by ½”

Using Multipurpose Liquid Adhesive, I added the strip of Be Dazzling Speciality dsp to the piece of 2021 – 2023 In Color dsp then added them to the Thick Basic White card base.

www.crafty-rootes.co.uk – A pretty purple dahlia thank you card made using the Delicate Dahlia stamp set by Stampin@ Up!

I stamped the outline of the dahlia in Highland Heather ink and stamped it on the panel of Basic White card. I inked the infill stamp in Fresh Freesia ink and added Highland Heather ink and Gorgeous Grape ink to the inked image using Sponge Daubers and stamped it inside the outline image.

www.crafty-rootes.co.uk – A pretty purple dahlia thank you card made using the Delicate Dahlia stamp set by Stampin@ Up!

The leaves were added in Garden Green ink, full strength for the outline and 2^nd generation (stamped off once) for the infill. The sentiment from the Arctic Bear stamp set was added in Gorgeous Grape ink.

www.crafty-rootes.co.uk – A pretty purple dahlia thank you card made using the Delicate Dahlia stamp set by Stampin@ Up!

The stamped panel was added with the same liquid glue to the Gorgeous Grape panel.

www.crafty-rootes.co.uk – A pretty purple dahlia thank you card made using the Delicate Dahlia stamp set by Stampin@ Up!

I wrapped a length of Sheer Gorgeous Grape Ribbon around the panel and the panel was then added to the card front on Dimensionals.

www.crafty-rootes.co.uk – A pretty purple dahlia thank you card made using the Delicate Dahlia stamp set by Stampin@ Up!

To finish the card, I added a bow made from the same ribbon and a trio of Pastel Pearls.

Love the purple dahlia, so pretty. I hope you like it.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A fun card made using the Party Patterns dsp and a selection of fonts from Stampin' Up! stamp sets for the Stamping INKSpirations Blog Hop

FONTS-amental for the Stamping INKSpirations Blog Hop

Posted on August 14, 2021August 15, 2021 by Mo Rootes

Hello and welcome to the Stamping INKSpirations Blog Hop where we our theme is FONTS-amental. I love a good font and I especially love combining fonts which is so trendy right now.

Colours used in this project are:

To recreate the feels like home card, you will need:

Party Patterns dsp – 5⅝” by 3⅞”
Party Patterns dsp – 4½” by 2½”
Basic White card – 4½” by 2½”
Basic White card – 5½” by 3¾” – for the inside
Scrap Bermuda Bay card

The larger panel of Party Patterns Designer Series Paper (dsp) was glued to the Misty Moonlight card front using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – A quirky card featuring birthday sentiments in a multitude of fonts for the Stamping INKSpirations Blog Hop

I selected the sentiments I thought would work together and ended up choosing from the following stamp sets – One Happy Family, Hey Birthday Chick, Garden Wishes, Elegantly Said & Season’s Blessings. I wanted a mixture of plain and quirky fonts.

www.crafty-rootes.co.uk – A quirky card featuring birthday sentiments in a multitude of fonts for the Stamping INKSpirations Blog Hop

I stamped the sentiments onto the die cut tag, cut using the Tailor Made tags Dies and my Mini Cut & Emboss Machine using Bermuda Bay, Misty Moonlight, Night of Navy, Soft Succulent inks.

www.crafty-rootes.co.uk – A quirky card featuring birthday sentiments in a multitude of fonts for the Stamping INKSpirations Blog Hop

Using the same die, I cut another tag from the smaller piece of Party Patterns dsp and glued the two tags together, offset, using the same liquid glue.

www.crafty-rootes.co.uk – A quirky card featuring birthday sentiments in a multitude of fonts for the Stamping INKSpirations Blog Hop

A small hole re-enforcer was die cut using the same set of dies and added to the tag with the liquid glue. The Soft Succulent Open Weave Ribbon was the pushed through the hole and secured. The tag was then added to the card front on Dimensionals.