Petals of Beauty Stamp-a-Stack

Today I am sharing the cards I designed for my March Stamp-A-Stack using the gorgeous Petals of Beauty stamp set and co-ordinating dies. I designed 10 cards, and the ladies make 2 of each design.

Colours used to make these cards are:

 

Each attendee’s pack contained the Petals of Beauty stamp set and dies. A pack of 2024 – 2026 In Color Flat Pearls, 5 ink spots filled with Pool Party, Soft Sea Foam, Petunia Pop, Timid Tiger, Night of Navy inks, 20 Envelopes, 20 card bases and all the layers, embossed and die cut pieces to create the cards.

Card 1 – Collage Birthday Wishes

Petunia Pop card bases – 8¼” by 5⅞” – scored at 4⅛” x 2
Basic White – 5” by 3¼” x 2
Night of Navy – 4½” by ½” x 2
Basic White – 4½” by ½” x 2
Basic White label x 2 – die cut with Nested Essentials
Basic White – 5½” by 3¾” x 2 – for the inside

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Stamp the large solid floral image, randomly all over the 5” by 3¼” piece of Basic White with Pool Party ink. Stamp the small outline floral image, randomly all over with Night of Navy ink. Add the flower centres to the Night of Navy flowers with Petunia Pop ink. Glue the Night of Navy strip to the left side, add the White strip and glue to card front. Stamp sentiment in Night of Navy onto die cut rectangle – add to card front on Dimensionals

Card 2 – Faux Silk

Pool Party card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Night of Navy – 5¼” by 3½” x 2
Basic White – 5” by 3¼” x 2
Adhesive Sheet – 5” by 3¼” x 2
White Tissue Paper – minimum of 5½” by 3¾” x 2
Basic White label x 2 die cut with Nested Essentials dies
Basic White card – 5½” by 3¾” x 2- for the inside

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Stamp the outline of the small floral image, randomly all over the 5¼” by 3½ piece of Basic White with Pool Party ink. Stamp the large outline floral image, randomly all over with Night of Navy ink. Add the flower centres to all flowers with Petunia Pop ink. Apply Adhesive Sheet to the front of the stamped panel. Screw up the piece of tissue paper, open out but DON’T smooth out fully. Use to cover the exposed adhesive sheet pressing down the wrinkles and rubbing over the image.

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Fold excess tissue paper to the back and glue down. Glue to the Night of Navy layer and then to card base. Stamp the sentiment onto die cut label with Night of Navy ink add to card front on Dimensionals.

Card 3 – Flowers on Embossed Background

Soft Sea Foam card base – 8¼” by 5⅞” scored at 4⅛” x 2
Petunia Pop – 5⅛” by 3⅜” x 2
Basic White – 5” by 3¼” x 2 – embossed
Basic White – 1⅞” by ⅜” x 2
Basic White card – 5½” by 3¾” x 2- for the inside
Scrap Basic White

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Glue the embossed panel to the Petunia Pop layer and then to the Soft Sea Foam card base. Stamp the outline of the large flower with Petunia Pop ink onto scrap Basic White card then stamp the solid flower in Petunia Pop ink – stamped off once over top. Add the flower centre with Navy ink. Stamp the outline small flower with Night of Navy ink onto scrap Basic White card. Add the solid flower over top in Night of Navy – stamped off once or twice, you choose. Add the flower centres with Petunia Pop ink. Stamp leafy spray in Soft Sea Foam ink on scrap Basic White card. Die cut all the images.

Glue blue flower and leafy spray to card front and add pink flower on Dimensionals. Stamp the sentiment in Petunia Pop ink on the strip of white and add to card front.

Card 4 – Floral Birthday

Timid Tiger card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Night of Navy – 5⅛” by 3⅜” x 2
Basic White – 5” by 3¼” x 2
Basic White label – die cut with Nested Essentials x 2
Basic White – 5½” by 3¾”” x 2 for the inside

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Stamp the Outline large Flower with Timid Tiger ink on the smaller White card panel

Stamp the solid large flower in Timid Tiger ink – stamped off once. Add the flower centre with Navy ink. Stamp the outline small flower with Petunia Pop ink, add the solid small flower in Petunia Pop ink – stamped off once and add flower centre with Navy ink.

Stamp the leafy sprig against each flower with Soft Sea Foam ink. Add the trio of small flowers randomly with Night of Navy ink. Glue the stamped panel to the Night of Navy layer then to the card front. Stamp the sentiment on the label with Night of Navy ink. Add on Dimensionals.

Card 5 – Double Orange Flowers

Petunia Pop card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Basic White – 5½” by 3¾” – x 4 – 2 for the inside
Timid Tiger – 5⅛” by 3⅜” – x 2
Basic White – 5” by 3¼”
Soft Sea Foam – 3¾” by 2”
Vellum – 4” by 1¾”
Scrap Basic White

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Stamp the Cluster of small flowers down the left-hand edge of the smaller Basic White panel with Soft Sea Foam ink. Stamp the sentiment in the bottom right corner in Petunia Pop ink.

Glue the panel to the Timid Tiger Layer and then to the Petunia Pop card front.

Stamp the leaf in Soft Sea Foam ink on the Soft Sea Foam card and add the panel to the card front on Dimensionals. Die cut the Vellum Leaf and tuck behind.

Stamp the Outline large & small Flower with Timid Tiger ink on the scrap White card and add the solid flowers in Timid Tiger ink – stamped off once.  Add the flower centres with Petunia Pop ink. Die cut the flowers and add to the card front.

Card 6 – Inter-layered Leaves

Night of Navy card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Soft Sea Foam – 5⅛” by 3⅜” x 2
Basic White – 5” by 3¼” x 2 – Embossed using Timeworn Type Embossing Folder
Basic White labels x 2 – die cut with Nested Essentials Dies
Basic White – 5½” by 3¾” x 2 – for the inside
Soft Sea Foam, Pool Party & Night of Navy 8¼” by 3½” piece of each

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Die cut 2 leafy sprigs in each of the three colours. Glue the leafy sprigs onto the embossed panels and trim off the excess. Glue the panel to the Soft Sea Foam layer and then to the Night of Navy card base. Stamp the sentiment in Night of Navy ink onto the die cut label and add to card front on Dimensionals.

Card 7 – Petunia Petals Flowers

Timid Tiger card bases – 8¼” by 5⅞” – scored at 4⅛” x 2
Petunia Pop – 5⅞” by 2” x 2
Basic White – 5⅞” by ⅜” x 4
Basic White – Circles x 2 – die cut using the Spotlight on Nature Dies
Basic White – 5½” by 3¾” x 2 – for the inside
Scrap Basic White

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Stamp the cluster of small flowers in a row, ½” from the top and bottom of the Timid Tiger card front. Stamp the large solid flower in Petunia Pop ink onto the Petunia Pop card. Glue a strip of White on either side and glue to the Timid Tiger card front. Stamp the sentiment with Night of Navy ink onto the die cut circle and add to the card front on Dimensionals.

Stamp the Outline large & small Flower with Petunia Pop ink on the scrap White card, add the solid flowers in Timid Tiger ink – stamped off once. Add the flower centres with Night of Navy ink. Stamp the solid leaf image in stamped off Soft Sea Foam on scrap White card and add the ‘veining’ in full strength Soft Sea Foam. Die cut the flowers and leaves and add to the card front.

Card 8 – Paper-Pieced Leaves

1 Night of Navy and 1 Pool Party card base – 8¼” by 5⅞” – scored at 4⅛”
1 Night of Navy and 1 Pool Party layer – 5⅛” by 3⅜”
Basic White – 5” by 3¼” x 2
Night of Navy and Pool Party – 4⅜” by 1¾” x 2 with Adhesive Sheet applied to the back
Basic White – 5½” by 3¾” x 2 – for the inside

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Die cut the leafy spray from the smaller pieces of Pool Party and Night of Navy card with adhesive on the back. Adhere the outline leafy spray, one on each piece of 5” by 3¼” Basic White card. Piece the leaf shapes into the spaces of both cards. Stamp the sentiment in Night of Navy ink. Adhere the white panels to the Navy or Pool Party layers then to the opposite colour card base.

Card 9 – Double Petunia Pop Flowers

Soft Sea Foam card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Soft Sea Foam – 5⅜” by 3⅝” – embossed with Timeworn Type Embossing Folder and cut in half at an angle
Night of Navy – 5⅞” by ⅛” x 2
Basic White – 5½” by 3¾” x 4 – 2 for the inside
Scrap Basic White & Night of Navy

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Adhere the embossed panel to one of the Basic White pieces, add the strip of Night of Navy card along the top edge and glue the whole panel to the Soft Sea Foam card base.

Stamp the Outline large & small Flower with Petunia Pop ink on the scrap White card, add the solid image in Petunia Pop ink – stamped off once. Add the flower centres with Night of Navy ink. Stamp the solid leaf image in Soft Sea Foam on scrap White card. Die cut the flowers and leaves and 2 veining pieces in Night of Navy. Add the flowers to the card front and tuck the leaves and veining behind. Stamp the sentiment in Navy ink.

Card 10 – Outline Flowers

Pool Party card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Timid Tiger – 5⅛” by 3⅜” x 2
Basic White – 5” by 3¼” x 2
Petunia Pop – 5” by ⅜” x 4
Basic White – 5 ½” by 3 ¾” x 2 – for the inside
Basic White – 7¼” by 3” – with Adhesive Sheet
Scrap Basic White with Adhesive Sheet
Scrap Basic White

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Stamp the outline large & small flowers, randomly on the 7” by 3” Basic White panel. The large in Petunia Pop and the small in Timid Tiger – see picture below.

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Die cut the outline of 2 large and 2 small flowers from the stamped panel. From scrap Basic White die cut 2 outline flowers. Adhere them together and add the patterned piece on top. Repeat this with the smaller flowers. Randomly stamp the cluster of small flowers in Pool Party ink onto the smaller panel of White. Glue stamped panel to the Timid Tiger layer.

 

10 cards designed for my March 2026 Stamp-a-Stack using the Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder all from Stampin' Up!

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

Order goodies/Join My Team

I would love to be your demonstrator if you don’t already have one and live in the UK.  I would also be delighted to send you a catalogue if you do not have a demonstrator. I would be happy to place an order for you, or you can order directly by clicking on the “shop online” button.

 

Contact me for information about joining my team or click on the ‘Join My Team’ button

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

Lovely floral card made using the First Frost stamp set and Frosted Bouquet dies by Stampin' Up!

First Frost for April Classes

Today I am sharing the cards made at this week’s classes using the First Frost Stamp set and co-ordinating Frosted Bouquet Dies.

Faux Silk Technique card

Lovely floral card made using the First Frost stamp set and Frosted Bouquet dies by Stampin' Up!

www.crafty-rootes.com – A gorgeous card made using the First Frost stamp set and the faux silk technique

You will need;
Berry Burst card base – rounded upper left corner
Lemon Lime Twist 5½” by 3¾” – rounded upper left corner
Whisper White 5⅜” by 3⅝ x 2 -rounded upper left corner
Tissue Paper 5¾” by 4”
Adhesive Sheet 5¾” by 4”
Scrap Whisper White

We used the Fresh Fig and Lemon Lime Twist Markers to colour in the stamp, huffed on the inked stamp to re-moisten the drying ink and stamped it onto one of the Whisper White panels. We then stamped the larger flower in Berry Burst ink and the smaller flower in Balmy Blue ink onto the scrap Whisper White.

The 2 stamped flowers were then die cut using the Frosted Bouquet dies. The ladies then chose a sentiment from the Itty Bitty Greetings stamp set, stamped it in Fresh Fig ink onto the scrap Whisper White and punched it out using the Classic Label Punch.

We peeled off the protective backing from the adhesive sheet and laid it, sticky side down onto the stamped panel taking care not to stick it to the grid paper underneath!  We trimmed the excess adhesive sheet using sharp scissors. The scissors were then cleaned with alcohol to remove the glue.

We crumpled the tissue paper into a ball then carefully unfolded it leaving many of the wrinkles. The tissue paper was then laid over the sticky stamped panel and pressed into position; the over-hanging tissue was then trimmed away. The flowers were then added with Liquid Glue or Dimensionals and the sentiment added over top.

This layer was then glued to the Lemon Lime Twist panel using Multipurpose Liquid Adhesive. The panel was added to the Berry Burst card front with Dimensionals.

We stamped a flower on the inside panel and the envelope and added a scattering of Iridescent Sequins to complete the card.

The Wishing You Well card

Lovely floral card made using the First Frost stamp set and Frosted Bouquet dies by Stampin' Up!

www.crafty-rootes.com – A gorgeous floral card made using the First Frost stamp set

You will need;
Lemon Lime Twist card base
Berry Burst 5¼” by 3½” – Rounded upper left corner
Whisper White 5⅜” by 3⅝ – for the inside – Rounded upper left corner
Whisper White 5⅛” by 3⅜” – for the card front –Rounded upper left corner
Fresh Fig 3” by 2”
Scrap Whisper White

Using the scrap Whisper White cardstock we stamped  2 of the leafy images in Lemon Lime Twist, 2 small flowers in Balmy Blue, 1 Berry Burst rose and 2 thistles in Fresh Fig. These images were all then die cut using the Big Shot and the Frosted Bouquet dies.

The sentiment from the First Frost stamp set was stamped in Fresh Fig ink onto the smaller piece of Whisper White and this piece was then die cut using the label dies along with the slightly larger Fresh Fig label. They were then glued together with Multipurpose Liquid Adhesive and added to the Whisper White panel with Dimensionals.

The die cut pieces were then arranged around the label using a combination of Dimensionals and Liquid Adhesive. We cut the leafy images down to give a fuller look and there was a lot of debate about whether the thistle image looked more like beetles or spiders!!!

The decorated panel was added to the Berry Burst layer with Multipurpose Liquid Adhesive and then glued to the Lemon Lime Twist card base with the same adhesive.

We stamped a couple of the leaf or flower images onto the inside Whisper White layer and the envelope an added a scattering of sequins.

The Faux Masked card

Lovely floral card made using the First Frost stamp set and Frosted Bouquet dies by Stampin' Up!

www.crafty-rootes.com – A gorgeous floral card made using the First Frost stamp set

You will need;
Balmy Blue card base – Rounded lower right corner
Fresh Fig 5 ½” by 3 ¾” – Rounded lower right corner
Whisper White 5⅜” by 3⅝” x 2 – 1 for the inside and 1 for the card front – Rounded lower right corners
Fresh Fig 3⅝” by 1 ½”
Whisper White 3⅝” by 1⅜”

We lined up one of the larger Whisper White panels on the grid paper making sure it was straight. We laid the 1⅜” strip of Whisper White on top and drew pencil lines on either side. This gave us the area on the panel that we needed to added images to.

We began by stamping the largest image, in this case the Berry Burst flower above the top pencil line and below the lower line making sure to overlap the lines.

We then stamped the leafy images in lemon Lime Twist, the small flowers in Balmy Blue and finally the thistles (beetles or spiders!) in Fresh Fig. The pencil lines were then rubbed out.

The sentiment from the Perennial Birthday stamp set was stamped in Fresh Fig ink onto the Whisper White strip and the strip was then glued to the Fresh Fig strip with Multipurpose Liquid Adhesive. This piece was then added to the stamped panel with Dimensionals.

This piece was then glued to the Fresh Fig layer then to the Balmy Blue layer with Multipurpose Liquid Adhesive. To finish the card off we stamped a couple of the leaf or flower images onto the inside Whisper White layer and the envelope an added a scattering of sequins.

Lovely floral card made using the First Frost stamp set and Frosted Bouquet dies by Stampin' Up!

www.crafty-rootes.com – A gorgeous floral card made using the First Frost stamp set

The ladies really enjoyed making these cards. I hope you like them.

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you.

Thanks for visiting my blog today, I love to read what you think of my projects so please do let me know. In line with new Data Protection Legislation (GDPR), by commenting you do so in the knowledge that your name & comment are visible to all who visit this blog and you thereby consent to the use of that personal information for that specific purpose. Please stop by again soon.

Details of the products I used for this project can be found below.

Mo x

Supplies used: