Gears & Textures Classes

The cards I am sharing today were designed for my February 2026 classes using the Gears & Textures stamp set and co-ordinating dies.

Colours used to make these cards are:

 

Circle Flip Fun Fold Card

Old Olive card base – 8¼” by 7⅞” scored at 4⅛” on the long side
Basic White card – 8” by 5⅝” scored at 2½”, 4½” and 6” on the long side
Basic White – 5⅝” by 3⅞”
Mixed Up Patterns dsp – 5½” by 1⅞”
Mixed Up Patterns dsp – 5½” by 1⅜”
Silver Foil – 2½” by 2½”
Scrap Basic- Secret Sea, Blueberry Bushel & Old Olive

 

Place the largest stitched circle die from the Stylish Shapes in the upper half of the 5⅝” by 3⅞” panel of Basic White card and lightly draw round it with a pencil.

 

A trio of cards made for my February 2026 classes using the Gears & Textures stamp set and co-ordinating dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures stamp set and co-ordinating dies used to create a trio of cards for my February 2026 classes

Stamp the dotty image with Blueberry Bushel ink in the bottom right and upper left of the circle, overlapping the drawn circle. Add the splash image next to the blue dots with Secret Sea ink. Add glue around the four sides of the panel, stay away from the middle and adhere to the Old Olive card front.

 

A trio of cards made for my February 2026 classes using the Gears & Textures stamp set and co-ordinating dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures stamp set and co-ordinating dies used to create a trio of cards for my February 2026 classes

Use the same die to cut a circle using the drawn in circle as your guide. Keep the Old Olive circle to use later and add the white circle to your stash.

Fold and burnish the inner layer – start with the largest rectangle on the right and valley fold, fold the next scoreline mountain and the last mountain i.e back on itself. Apply the dsp panels to the middle two rectangles. Stamp the sentiment in the right-hand panel.

 

A trio of cards made for my February 2026 classes using the Gears & Textures stamp set and co-ordinating dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures stamp set and co-ordinating dies used to create a trio of cards for my February 2026 classes

Fold the card base down the centre scoreline, add glue to the largest rectangle of the inner panel and place inside the card base with the left-hand edge of the inner panel butted up to the centre scoreline and close.

 

A trio of cards made for my February 2026 classes using the Gears & Textures stamp set and co-ordinating dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures stamp set and co-ordinating dies used to create a trio of cards for my February 2026 classes

Apply glue to the left edge, top and bottom of the free edge of the inner panel and  along the scoreline of the inner panel as far as the die cut circle. Close the card front.

 

A trio of cards made for my February 2026 classes using the Gears & Textures stamp set and co-ordinating dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures stamp set and co-ordinating dies used to create a trio of cards for my February 2026 classes

With the card closed apply glue to the right-hand half of the circle (in the negative space) and add in the die cut Old Olive circle. Hold in position until bonded. Die cut large Silver Foil cog and a small cog from Secret Sea card and the small cog to the centre of the Silver cog. Mount onto the die cut circle using Dimensionals.

 

A trio of cards made for my February 2026 classes using the Gears & Textures stamp set and co-ordinating dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures stamp set and co-ordinating dies used to create a trio of cards for my February 2026 classes

Die cut two medium cogs from scrap Blueberry Bushel and Secret Sea card and a circular frame from Old Olive card. And add to the card front.

 

Cog Birthday card

Blueberry Bushel card – 8¼” by 5⅞” scored at 4⅛” on the long side
Old Olive card – 5⅜” by 3⅝”
Basic White card – 5¼” by 3½”
Mixed Up Patterns dsp – 3⅝” by 1⅜”
Basic White card – 5½” by 3¾” – for the inside
Silver Foil – 2½” by 2½”
Scrap Secret Sea card

 

Using Blueberry Bushel ink, we stamped the sentiment down the left-side of the 5¼” by 3½” panel of Basic White card.

 

A trio of cards made for my February 2026 classes using the Gears & Textures stamp set and co-ordinating dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures stamp set and co-ordinating dies used to create a trio of cards for my February 2026 classes

Placing the strip of Mixed Up Patterns dsp alongside the stamped sentiment, but not gluing it down, we moved it to one side and stamped the splash image in the lower left-hand corner with secret Sea ink so that part of the image will be visible when the dsp is glued down.

 

A trio of cards made for my February 2026 classes using the Gears & Textures stamp set and co-ordinating dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures stamp set and co-ordinating dies used to create a trio of cards for my February 2026 classes

The dotty image was stamped in the same way at the top of the piece of dsp with Blueberry Bushel ink. The dsp was then glued into place.

 

A trio of cards made for my February 2026 classes using the Gears & Textures stamp set and co-ordinating dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures stamp set and co-ordinating dies used to create a trio of cards for my February 2026 classes

The large cog was die cut from the square of Silver Foil using the Gears & Textures dies. It was added, overlapping the dsp on Dimensionals.

 

A trio of cards made for my February 2026 classes using the Gears & Textures stamp set and co-ordinating dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures stamp set and co-ordinating dies used to create a trio of cards for my February 2026 classes

A small cog was die cut from scrap Secret Sea card and glued to the centre of the silver cog to finish the card.

 

A trio of cards made for my February 2026 classes using the Gears & Textures stamp set and co-ordinating dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures stamp set and co-ordinating dies used to create a trio of cards for my February 2026 classes

Striped Birthday Card

Secret Sea card – 8¼” by 5⅞” scored at 4⅛” on the long side
Blueberry Bushel card – 5⅜” by 3⅝”
Basic White card – 5¼” by 3½”
Basic White card – 5½” by 3¾” – for the inside

 

We began by stamping the dotty strip, diagonally across the smaller panel of Basic White card using Secret Sea ink.

 

A trio of cards made for my February 2026 classes using the Gears & Textures stamp set and co-ordinating dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures stamp set and co-ordinating dies used to create a trio of cards for my February 2026 classes

The film strip image was stamped below with Old Olive ink and the chain link above with Blueberry Bushel ink.

 

A trio of cards made for my February 2026 classes using the Gears & Textures stamp set and co-ordinating dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures stamp set and co-ordinating dies used to create a trio of cards for my February 2026 classes

The word ‘birthday; from the Reason to Celebrate stamp set as stamped below the bottom image with Blueberry Bushel ink.

 

A trio of cards made for my February 2026 classes using the Gears & Textures stamp set and co-ordinating dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures stamp set and co-ordinating dies used to create a trio of cards for my February 2026 classes

We added ‘happy’ with Secret Sea ink before gluing the decorated panel to the Blueberry Bushel layer.

 

A trio of cards made for my February 2026 classes using the Gears & Textures stamp set and co-ordinating dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures stamp set and co-ordinating dies used to create a trio of cards for my February 2026 classes

Using Dimensionals the whole piece was added to the Secret Sea card front to complete the card.

 

A trio of cards made for my February 2026 classes using the Gears & Textures stamp set and co-ordinating dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures stamp set and co-ordinating dies used to create a trio of cards for my February 2026 classes

Order goodies/Join My Team

I would love to be your demonstrator if you don’t already have one and live in the UK.  I would also be delighted to send you a catalogue if you do not have a demonstrator. I would be happy to place an order for you, or you can order directly by clicking on the “shop online” button.

 

Contact me for information about joining my team or click on the ‘Join My Team’ button

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A floral birthday card -made with the Lovely Arrangements stamp set and dies and the Gears & Textures stamp set and dies from Stampin' Up!

Lovely Arrangements Card – Stamping With Friends Blog Hop

Hello and welcome to the Stamping With Friends Blog Hop where be are sharing something of our own choice. I am sharing the first card made using the Lovely Arrangements stamp set and co-ordinating dies.

Colours used to make this card are:

 

I created the lovely arrangements card using the following supplies:

Flirty Flamingo card base – 8¼” by 5⅞” scored at 4⅛” on the long side
Secret Sea Card – 5⅜ by 3⅝”
Basic White card – 5¼” by 3½”
Basic White card – 5½” by 3¾” – for the inside
Secret Sea Card – 2” by ⅜”
Scrap Basic White & Smoky Slate card

 

I stamped the dotty image from the Gears & Textures stamp set in the upper left-hand side of the panel of Basic White card measuring 5¼” by 3½”. I randomly added the small cross-hatched stamp in 2nd generation Flirty Flamingo ink.

 

A floral birthday card -made with the Lovely Arrangements stamp set and dies and the Gears & Textures stamp set and dies from Stampin' Up!

www.crafty-rootes.co.uk – The Lovely Arrangements stamp set and dies used with the Gears & Textures stamp set and dies to make floral birthday card – Stamping With Friends Blog Hop

From scrap Smoky Slate I die cut two of the chain link strips and added them to the stamped panel.

 

A floral birthday card -made with the Lovely Arrangements stamp set and dies and the Gears & Textures stamp set and dies from Stampin' Up!

www.crafty-rootes.co.uk – The Lovely Arrangements stamp set and dies used with the Gears & Textures stamp set and dies to make floral birthday card – Stamping With Friends Blog Hop

On scrap Basic White card, I stamped a large flower, 2 small flowers and 2 leafy clusters with Secret Sea ink. These were cut using the Lovely Arrangements dies. The flowers were coloured using Flirty Flamingo and Lemon Lime Twist Blends Pens.

 

A floral birthday card -made with the Lovely Arrangements stamp set and dies and the Gears & Textures stamp set and dies from Stampin' Up!

www.crafty-rootes.co.uk – The Lovely Arrangements stamp set and dies used with the Gears & Textures stamp set and dies to make floral birthday card – Stamping With Friends Blog Hop

The flowers and leaves were then added to the card front, some with Multipurpose Liquid Adhesive, others with Mini Glue Dots and the largest flower on Dimensionals.

 

A floral birthday card -made with the Lovely Arrangements stamp set and dies and the Gears & Textures stamp set and dies from Stampin' Up!

www.crafty-rootes.co.uk – The Lovely Arrangements stamp set and dies used with the Gears & Textures stamp set and dies to make floral birthday card – Stamping With Friends Blog Hop

The sentiment was stamped with Versamark ink on the small piece of Secret Sea card. I covered the card with White Embossing Powder and set it with my Heat Tool before adding it to the card front.

 

A floral birthday card -made with the Lovely Arrangements stamp set and dies and the Gears & Textures stamp set and dies from Stampin' Up!

www.crafty-rootes.co.uk – The Lovely Arrangements stamp set and dies used with the Gears & Textures stamp set and dies to make floral birthday card – Stamping With Friends Blog Hop

A trio of Iridescent Faceted Gems finished the card.

Please hop on to see what my fellow crafters have to share with us today.



Blog Hop Index


Order goodies/Join My Team

I would love to be your demonstrator if you don’t already have one and live in the UK.  I would also be delighted to send you a catalogue if you do not have a demonstrator. I would be happy to place an order for you, or you can order directly by clicking on the “shop online” button.

 

Contact me for information about joining my team or click on the ‘Join My Team’ button

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A masculine birthday card made using the Gears & Textures and Tractor & Co stamp sets from Stampin' Up!

Birthday Gears Card

I am loving the Gears & Textures stamp set and dies and have used it again to make a masculine birthday card.

Colours used to make this card are:

 

To recreate the birthday gears card, you will need:

Lost Lagoon card base – 8¼” by 5⅞” scored at 4⅛”
Gold Foil – 5⅛” by 3⅜”
Basic White -5” by 3¼”
Basic White – 5½” by 3¾” for the inside
Scrap Cloud Cover, Pretty Peacock & Pretty Peacock

 

Using Pretty Peacock ink I stamped the chain image, twice across the smaller panel of Basic White card.

 

A masculine birthday card made using the Gears & Textures and Tractor & Co stamp sets from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures and Tractor & Co stamp sets used to make a masculine birthday card

The stripy image was added, twice using Cloud Cover ink and the ink. Using Lost lagoon ink I stamped the oily splatter and the small triple stripped image.

 

A masculine birthday card made using the Gears & Textures and Tractor & Co stamp sets from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures and Tractor & Co stamp sets used to make a masculine birthday card

The sentiment, from the Tractor & Co stamp set was stamped in Lost Lagoon ink.

 

A masculine birthday card made using the Gears & Textures and Tractor & Co stamp sets from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures and Tractor & Co stamp sets used to make a masculine birthday card

From scrap Cloud Cover, Pretty Peacock and Gold Foil I die cut a selection of gears and cogs. I glued some together and added them to the decorated panel on Dimensionals.

 

A masculine birthday card made using the Gears & Textures and Tractor & Co stamp sets from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures and Tractor & Co stamp sets used to make a masculine birthday card

The decorated panel was glued to the Gold Foil panel and then to the Lost Lagoon card front.

 

A masculine birthday card made using the Gears & Textures and Tractor & Co stamp sets from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures and Tractor & Co stamp sets used to make a masculine birthday card

A Moody Palette Glossy Dot was added to the centre of each of the gears to finish the card.

 

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A masculine birthday card made using the Gears & Textures and Reason to Celebrate stamp sets used with Spotlight on Nature dies from Stampin' Up!

Birthday Gears Card

Here is a lovely birthday card for a boy/man in your life made using the Gears & Textures stamp set and co-ordinating dies.

 Colours used to make this card are:

 

To recreate the birthday gears card, you will need:

Basic Beige card base – 8¼” by 5⅞” scored at 4⅛”
Blackberry Bliss card – 5⅛” by 3⅜”
Basic White card – 5” by 3¼”
Basic White card – 3¼” by 3¼”
Basic White card – 5½” by 3¾” for the inside
Scrap Basic White, Basic Beige, Garden Green & Blackberry Bliss

 

The ‘arrow’ image was stamped on the right and left of the Basic Beige card front with Garden Green ink.

 

A masculine birthday card made using the Gears & Textures and Reason to Celebrate stamp sets used with Spotlight on Nature dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures and Reason to Celebrate stamp sets used with Spotlight on Nature dies used to make a masculine birthday card

I die cut a decorated circle from the square of Basic White card using the Spotlight on Nature Dies. The die cut circle was the placed on the 5” by 3¼” piece of Basic White card and lightly drew around it with a pencil to help with image placement.

 

A masculine birthday card made using the Gears & Textures and Reason to Celebrate stamp sets used with Spotlight on Nature dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures and Reason to Celebrate stamp sets used with Spotlight on Nature dies used to make a masculine birthday card

The largest gear piece was stamped, overlapping the pencil circle using Basic Beige ink a few times around the circle making sure I overlapped the pencil line.

The smaller gear piece was then stamped around the circle with Blackberry Bliss ink. The oil splotch was added with Garden Green ink and finally, I added the top of the screw with Early Espresso ink. The pencil line was then erased.

 

A masculine birthday card made using the Gears & Textures and Reason to Celebrate stamp sets used with Spotlight on Nature dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures and Reason to Celebrate stamp sets used with Spotlight on Nature dies used to make a masculine birthday card

The sentiment, from the Reason To Celebrate stamp set was stamped onto the die cut circle. I used Blackberry Bliss ink for one word and Garden Green ink for the others. The circle was then added to the stamped layer on Dimensionals, overlapping the edge and the excess trimmed off.

 

A masculine birthday card made using the Gears & Textures and Reason to Celebrate stamp sets used with Spotlight on Nature dies from Stampin' Up!

www.crafty-rootes.co.uk – The Gears & Textures and Reason to Celebrate stamp sets used with Spotlight on Nature dies used to make a masculine birthday card

From scrap Basic Beige, Garden Green and Blackberry Bliss card I die cut a small gear image and added them to raised circle.

A trio of retired Garden Green dots from my stash were added to finish the card.

 

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A masculine themed card made using the Gears and Textures and Sunrise Sailing stamp sets and the Traditions of Christmas dsp from Stampin' Up!

Sketched Gears Card – Ink & Inspirations Blog Hop

Hello and welcome to the Ink & Inspirations Blog Hop where we are sharing projects inspired by a sketch. I have used the Gears & Textures stamp set and dies to make my card.

 

Colours used to make this card are:

 

To recreate the sketched gears card, you will need:

Night of Navy card base – 8¼” by 5⅞” scored at on the long side at 4⅛”
Old Olive card – 5⅜” by 3⅝”
Basic White card – 5¼” by 3½”
Traditions of Christmas dsp – 3⅝” by 1⅜”
Silver Foil – 2¾” by 2¾”
Basic White card – 5½” by 3¾” for the inside
Scrap Night of Navy card

I stamped the dotty image from the Gears & Textures stamp set was stamped onto the panel of Basic White card measuring 5¼” by 3½” using Night of Navy ink.

 

A masculine themed card made using the Gears and Textures and Sunrise Sailing stamp sets and the Traditions of Christmas dsp from Stampin' Up!

www.crafty-rootes.co.uk – The Gears and Textures and Sunrise Sailing stamp sets used with the Traditions of Christmas dsp to make a masculine themed card

The panel of Traditions of Christmas dsp was then glued to the stamped panel.

 

A masculine themed card made using the Gears and Textures and Sunrise Sailing stamp sets and the Traditions of Christmas dsp from Stampin' Up!

www.crafty-rootes.co.uk – The Gears and Textures and Sunrise Sailing stamp sets used with the Traditions of Christmas dsp to make a masculine themed card

Using Night of Navy ink, I stamped the sentiment, from the Sunrise Sailing stamp set along the edge of the dsp layer.

 

A masculine themed card made using the Gears and Textures and Sunrise Sailing stamp sets and the Traditions of Christmas dsp from Stampin' Up!

www.crafty-rootes.co.uk – The Gears and Textures and Sunrise Sailing stamp sets used with the Traditions of Christmas dsp to make a masculine themed card

The decorated panel was then glued to the layer of Old Olive card which was glued to the Night of Navy card front.

 

A masculine themed card made using the Gears and Textures and Sunrise Sailing stamp sets and the Traditions of Christmas dsp from Stampin' Up!

www.crafty-rootes.co.uk – The Gears and Textures and Sunrise Sailing stamp sets used with the Traditions of Christmas dsp to make a masculine themed card

I die cut a large cog from the square of Silver Foil and a small cog from scrap Night of Navy card. The smaller cog was glued to the centre of the larger cog and the whole piece was mounted onto the card front on Dimensionals.

 

A masculine themed card made using the Gears and Textures and Sunrise Sailing stamp sets and the Traditions of Christmas dsp from Stampin' Up!

www.crafty-rootes.co.uk – The Gears and Textures and Sunrise Sailing stamp sets used with the Traditions of Christmas dsp to make a masculine themed card

A trio of Smoky Slate Pearls completed the card.

Please hop on to see what my crafty friends had made to share with us today.

 

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used: