A pop out accordion fold card made for a special birthday using the Petals of Beauty stamp set and co-ordinating dies used with the Kintsugi Inspirations designer series from Stampin' Up!

Pop Out Accordion Petals of Beauty Card – Share It Sunday Blog Hop

Posted on January 25, 2026January 19, 2026 by Mo Rootes

Hello and welcome to the Share It Sunday Blog Hop where we are sharing something we have been working on recently. The pop out accordion card I am sharing today was made for a friend’s special birthday using the Petals of Beauty stamp set and dies.

Colours used to make this card are:

I created the pop out accordion petals of beauty card using the following supplies:

Thick Basic White card base – 20cm by 15cm – scored at 5cm, 10cm & 15cm on the long-side
Lost Lagoon card – 14.5cm by 4.5cm x 4
Kintsugi Inspirations dsp – 14cm by 4cm x 4

Thick Basic White card – 10cm by 7.5cm – scored at 7.5cm on the long-side
Kintsugi Inspirations dsp – 9.5cm by 7cm x 2
Basic White card – 3¾” by 2¾” x 2
Scrap Basic White & Lost Lagoon card

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and co-ordinating dies used with the Kintsugi Inspirations designer series paper to make a pop out accordion fold card for a special birthday – Share It Sunday Blog Hop

I adhered the long panels of Kintsugi Inspirations dsp to the slightly larger pieces of Lost Lagoon card. These 4 panels were then glued to the slightly larger Thick Basic White card base which was then folded and burnished in a mountain, valley and mountain shape.

The remaining pieces of dsp were glued to the smaller piece of Thick Basic White card.

With the larger card base folded up, accordion style I adhered the left-hand side of the decorated panel to the front of the accordion panel, taking care that it would fit in a standard C6 Envelope. I repeated this step to glue the back panel of the pop out portion.

I cut 2 arches from the pieces of Basic White card measuring 3¾” by 2¾” using the Everyday Arches Dies.

On one of the arches, I stamped the sentiment from the Coneflower Celebrations stamp set with Lost Lagoon ink. Using the same ink, I stamped the second sentiment from the Branching Out stamp set on the 2^nd arch. The arches were then glued to the pop out portion of the card.

I stamped the outline of a large and a small flower from the Petals of Beauty stamp set with Calypso Coral ink and added the infill colour with Petal Pink ink. These flowers were then cut using the Petals of Beauty Dies. The flowers were then added to the card front.

I die cut some of the leafy sprigs from scrap Lost Lagoon card and added then to the card front.

A scattering of Rainbow Dots completed the card.

Please hop on to share the inspiration provided by my crafty friends.

Order goodies/Join My Team

I would love to be your demonstrator if you don’t already have one and live in the UK. I would also be delighted to send you a catalogue if you do not have a demonstrator. I would be happy to place an order for you, or you can order directly by clicking on the “shop online” button.

Contact me for information about joining my team or click on the ‘Join My Team’ button

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty twisted fun fold card made using the Inspiring Imperfections stamp set and dies and the Kintsugi Inspirations dsp from Stampin' Up!

Twisted Kintsugi Card – Share It Sunday Blog Hop

Posted on October 26, 2025October 13, 2025 by Mo Rootes

Hello and welcome to the Share It Sunday Blog Hop where we are sharing projects we have been working on. My twisted Kinsugi card was inspired by Julie Davison – https://www.youtube.com/watch?v=GAaB4fg3Oq8 and I made it using the Inspiring Imperfections stamp set and dies with the Kintsugi Inspirations designer series paper (dsp) to make my version of Julie’s card.

Colours used to make this card are:

To recreate the twisted kintsugi card, you will need:

Misty Moonlight card base – 10¼” by 4 x 2 scored at 5½”
Basic White card – 5¼” by 3¾”
Kintsugi Inspirations dsp – 3¾” by 3¾” cut in half on the diagonal from corner to corner
Basic White card – 3¼” by 3¼”
Scrap Kintsugi Inspirations dsp and Cloud Cover card

With a pencil, mark each of the smaller panels of the card bases at 4” then score from the 4” mark to the upper corner on both pieces of card

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies used with the Kintsugi Inspirations dsp to make a pretty twisted card – Share It Sunday Blog Hop

Glue the 2 large panels of the card bases, one on top of the others to create the back of the card.

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies used with the Kintsugi Inspirations dsp to make a pretty twisted card – Share It Sunday Blog Ho

The card base was then folded on all the score lines and the 2 triangles of Kintsugi Inspiration dsp adhered to the triangular front panels with the long edge butted up to the edge of the fold.

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies used with the Kintsugi Inspirations dsp to make a pretty twisted card – Share It Sunday Blog Hop

Using the largest stitched squares from the Stylish Shapes Dies I cut a square from the square of Basic White card.

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies used with the Kintsugi Inspirations dsp to make a pretty twisted card – Share It Sunday Blog Hop

From the Kintsugi Inspirations dsp I die cut a vase and a bowl and glued the die cut pieces to the stitched square. From scrap Cloud Cover card, I die cut the small open floral piece and tucked it in the top of the bowl.

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies used with the Kintsugi Inspirations dsp to make a pretty twisted card – Share It Sunday Blog Hop

The sentiment was stamped in Versamark ink onto scrap Cloud Cover card. I covered it with Gold Embossing Powder and set it using my Heat Tool. The sentiment was then trimmed down and glued to the Basic White square.

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies used with the Kintsugi Inspirations dsp to make a pretty twisted card – Share It Sunday Blog Hop

With the closed card in portrait mode, I adhered the ribbon to the top triangle with a little Tear and Tape. The upper half of the square was then glued to the upper triangle and the ribbon wrapped around and tied in a bow to close the card.

A trio of Adhesive-backed Metallic Sequins finished the card.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A card for a sketch challenge using the cute Stay Warm stamp set used with the Traditions of Christmas dsp from Stampin' Up!

Jumper Sketch Card – Ink & Inspirations Blog Hop

Posted on September 25, 2025September 15, 2025 by Mo Rootes

Hello and welcome to the Ink & Inspirations Blog Hop where we have a sketch to inspire our creativity. I have made my card using the Stay Warm stamp set.

Colours used to make this card are:

To recreate the jumper sketch card, you will need:

Secret Sea card base – 8¼” by 5⅞” – scored at 4⅛”
Basic White card – 5⅝” by 3⅞”
Traditions of Christmas dsp – 5½” by 3¾”
Basic White card – 3¾” by 3¾”
Basic White card – 1½” by ½”
Basic White card – 5½” by 3¾” for the inside

The panel of Kintsugi Inspirations designer series paper was glued to the larger panel of Basic White card. I wrapped a length of Old Olive Linen Thread around the layer before gluing the panel to the Secret Sea card front.

www.crafty-rootes.co.uk – The cute Stay Warm stamp set used with the Traditions of Christmas dsp to create a card for a sketch challenge – Ink & Inspirations Blog Hop.

From the square of Basic White card I die cut a circle using the Spotlight on Nature Dies.

www.crafty-rootes.co.uk – The cute Stay Warm stamp set used with the Traditions of Christmas dsp to create a card for a sketch challenge – Ink & Inspirations Blog Hop.

Using Secret Sea ink, I stamped the jumper onto the die cut circle and added colour using the following Blends Pens – dark Real Red and light and dark Old Olive. The circle was mounted onto the card front on Dimensionals.

www.crafty-rootes.co.uk – The cute Stay Warm stamp set used with the Traditions of Christmas dsp to create a card for a sketch challenge – Ink & Inspirations Blog Hop.

The sentiment, from the Festive Friends stamp set was stamped on the small piece of Basic White card with Secret Sea ink and added to the card front.

www.crafty-rootes.co.uk – The cute Stay Warm stamp set used with the Traditions of Christmas dsp to create a card for a sketch challenge – Ink & Inspirations Blog Hop.

A bow and a trio of Black Rhinestones from my stash finished the card.

www.crafty-rootes.co.uk – The cute Stay Warm stamp set used with the Traditions of Christmas dsp to create a card for a sketch challenge – Ink & Inspirations Blog Hop.

Please hop on to see what my demo friends have made using this sketch.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty white flower thank you card made using the gorgeous Impressions Abloom Dies and Kintsugi Impressions dsp from Stampin' Up!

White Flower Card

Posted on September 23, 2025September 15, 2025 by Mo Rootes

Here is a sweet thank you card featuring a White flower made using the Impressions Abloom stamp set.

Colours used to make the white flower card are:

Basic White

Cloud Cover

Misty Moonlight

To recreate the white flower card, you will need:

Cloud Cover card base – 8¼” by 5⅞” – scored at 4⅛”
Basic White Card – 5⅛” by 3⅜”
Kintsugi Inspirations dsp – 5” by 3¼”
Basic White card – 5½” by 3¾” for the inside
Scrap Basic White card, Cloud Cover card and Kintsugi Inspirations dsp

The piece of Kintsugi Inspirations designer series paper was glued to the 5⅛” by 3⅜” piece of Basic White card. The panel was then glued to the Cloud Cover card base.

www.crafty-rootes.co.uk – The gorgeous Impressions Abloom Dies used with the Kintsugi Impressions dsp to create a pretty white flower thank you card.From scrap Basic White card, I die cut and embossed the largest flower, shaped it with a Bone Folder and added it to the card front on a Dimensional. A large flower centre was die cut and embossed from scrap Kintsugi Inspirations dsp. I glued it into the centre of the flower.

www.crafty-rootes.co.uk – The gorgeous Impressions Abloom Dies used with the Kintsugi Impressions dsp to create a pretty white flower thank you card

I die cut 2 leafy sprigs from the scrap Basic White card and added them to the card front, tucking them underneath the flower.

www.crafty-rootes.co.uk – The gorgeous Impressions Abloom Dies used with the Kintsugi Impressions dsp to create a pretty white flower thank you card.

A trio of tiny flowers were die cut from scrap Cloud Cover and these were added around the large flower. An Iridescent Pearl was added to the centre of each tiny flower.

www.crafty-rootes.co.uk – The gorgeous Impressions Abloom Dies used with the Kintsugi Impressions dsp to create a pretty white flower thank you card.

The sentiment was stamped in Misty Moonlight ink and die cut using the Everyday Arches Dies before it was added to the card front.

www.crafty-rootes.co.uk – The gorgeous Impressions Abloom Dies used with the Kintsugi Impressions dsp to create a pretty white flower thank you card.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty Christmas card made using the Woodland Scenery stamp set and the Kintsugi Inspirations designer series paper (dsp) from Stampin' Up!

Woodland Scene Card – Share It Sunday Blog Hop

Posted on August 31, 2025September 3, 2025 by Mo Rootes

Hello and welcome to the Share It Sunday Blog Hop where we are sharing something we have been working on recently. I am sharing a card made using the new Woodland Scenery stamp set. This is such a pretty set, and I do love to build a scene.

Colours used to make this card are:

To recreate the woodland scene card, you will need:

Misty Moonlight card base – 8¼” by 5⅞” – scored at 4⅛”
Basic White card – 5⅜” by 3⅝”
Kintsugi Inspirations dsp – 5¼” by 3½”
Misty Moonlight card – 2⅜” by 2⅜”
Basic White card – 2½” by 2½”
Basic White card – 1¾” by 1”
Basic White card – 5½” by 3¾” for the inside

The panel of Kinsugi Inspirations designer series paper (dsp) was adhered to the piece of Basic White card measuring 5⅜” by 3⅝”.

www.crafty-rootes.co.uk -The Woodland Scenery stamp set used with the Kintsugi Inspirations designer series paper (dsp) to make a pretty Christmas card

A length of Misty Moonlight Ribbon was wrapped around the panel and secured on the back with Sellotape. The whole piece was then glued to the Misty Moonlight card base.

www.crafty-rootes.co.uk -The Woodland Scenery stamp set used with the Kintsugi Inspirations designer series paper (dsp) to make a pretty Christmas card

The wooden cabin was stamped onto the square of Basic White card using Misty Moonlight ink. The trees were added on either side using Pecan Pie ink.

www.crafty-rootes.co.uk -The Woodland Scenery stamp set used with the Kintsugi Inspirations designer series paper (dsp) to make a pretty Christmas card

Using a Blending Brush, I added a little Cloud Cover ink to the ‘ground’ and stamped the deer with Early Espresso ink. Snowflakes were stamped in Cloud Cover ink before the decorated panel was glued to the square of Misty Moonlight card. This piece was then added to the card front on Dimensionals.

www.crafty-rootes.co.uk -The Woodland Scenery stamp set used with the Kintsugi Inspirations designer series paper (dsp) to make a pretty Christmas card

The sentiment, from the Ornamental Christmas stamp set was partially inked with Misty Moonlight ink and stamped onto the small piece of Basic White card. I only wanted the words ‘peace & joy’ so masked off the remaining words. The stamped piece was then tucked under the raised panel.

www.crafty-rootes.co.uk -The Woodland Scenery stamp set used with the Kintsugi Inspirations designer series paper (dsp) to make a pretty Christmas card

A trio of Dappled Dots finished the card.

Please hop on to share the inspiration provided by my crafty friends.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Cards made for my August 2025 Classes using the Inspiring Imperfections stamp set and dies and the Kintsugi Inspirations dsp from Stampin' Up!

Kintsugi Inspiring Imperfections Classes

Posted on August 17, 2025August 15, 2025 by Mo Rootes

Today I am sharing the cards I designed for my August classes using the Inspiring Imperfections stamp set and dies with the Kintsugi Inspirations dsp.

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies used with the Kintsugi Inspirations dsp to make a cards, including a fun fold, for my August 2025 Classes

Colours used to make these cards are:

Faux Step Card

Misty Moonlight card base – 8” by 5½” – scored at 1”, 2” & 5” on long side
Misty Moonlight card – 6” by 3” scored at 4¼”
Misty Moonlight – 5⅜” by 2⅝” – embossed with the Glass and Garden Embossing Folder
Basic White – 5⅜” by ⅞”
Kintsugi Inspirations dsp – 5¼” by ¾”
Cloud Cover – 4” by 3”
Basic White – 3⅞” by 2⅞”
Basic White – 2” by ¾” – banner cut using the Stylish Shapes Dies
Basic White – 5¼” by 2⅞” – for the inside
Scrap Basic White

Fold the Misty Moonlight card base, mountain, valley and mountain then adhere the embossed panel to the larger part of the folded card front.

Glue the strip of Kintsugi Inspirations dsp to the 5⅜” by ⅞” piece of Basic White card and adhere to the smaller front fold of the card base.

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies used with the Kintsugi Inspirations dsp to make a cards, including a fun fold, for my August 2025 Classes

On scrap Basic White card stamp the vase and the bowl with Misty Moonlight ink and die cut. Colour the flowers with Petal Pink Stamp ‘n Write Marker. Colour the inside of the vase and bowl and the base of the bowl with the Cloud Cover Marker.

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies used with the Kintsugi Inspirations dsp to make a cards, including a fun fold, for my August 2025 Classes

The larger ‘crack’ was stamped onto the 3⅞” by 2⅞” piece of Basic White card using Versamark ink, covered it with Gold Embossing Powder and set it using a Heat Tool. The embossed piece was then glued to the Cloud Cover panel and then to the 6” by 3” piece of Misty Moonlight card. The vase and the bowl were then glued in position.

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies used with the Kintsugi Inspirations dsp to make a cards, including a fun fold, for my August 2025 Classes

Glue was added to the bottom half of the back part of the 6” by 3” piece of Misty Moonlight card. This was then glued to the back of the main card base. A little glue adhered the front flap to the 1” panel of the card front.

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies used with the Kintsugi Inspirations dsp to make a cards, including a fun fold, for my August 2025 Classes

The sentiment, from the retired Itty Bitty Greetings stamp set was stamped in Misty Moonlight ink onto the die cut label and added to the card front.

Vase, Bowl and Flower card

Petal Pink card base – 8¼” by 5⅞” – scored at 4⅛”
Misty Moonlight – 5⅛” by 3⅜”
Basic White – 5” by 3¼”
Kintsugi Inspirations dsp dsp – 4⅛” by ¾”
Basic White – 4⅛” by ⅜”
Basic White – 5½” by 3¾” – for the inside
Gold Foil backed with Adhesive Sheet – large ‘crack’ and small flower die cut
Scrap Basic White

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies used with the Kintsugi Inspirations dsp to make a cards, including a fun fold, for my August 2025 Classes

The thin strip of Basic White card was glued along one edge of the strip of dsp. The whole piece was then glued to the Petal Pink card front.

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies used with the Kintsugi Inspirations dsp to make a cards, including a fun fold, for my August 2025 Classes

The sentiment was stamped in Misty Moonlight ink in the lower right corner of the 5” by 3¼” panel of Basic White card. The panel was then adhered to the Misty Moonlight layer and added to the Petal Pink card front. The gold die cut small flower was slipped under the upper right corner.

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies used with the Kintsugi Inspirations dsp to make a cards, including a fun fold, for my August 2025 Classes

The vase, bowl and flower were stamped on scrap Basic White card with Misty Moonlight ink. The images were coloured with the Petal Pink and Cloud Cover Marker and the die cut crack added to the vase which was then glued to the card front. The bowl and flower were added to the card front on Dimensionals.

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies used with the Kintsugi Inspirations dsp to make a cards, including a fun fold, for my August 2025 Classes

Floral Card

Cloud Cover card base – 8¼” by 5⅞” – scored at 4⅛”
Misty Moonlight – 4½” by 3”
Basic White – 4⅜” by 2⅞”
Gold Foil – 1” by 1” – cut in ½ on the diagonal
Petal Pink – 3⅛” by ⅜”
Misty Moonlight – 3⅛” by ¼”
Basic White – 5½” by 3¾” – for the inside

The small floral image was stamped in the upper left and lower right corner of the Cloud Cover card front with Cloud Cover ink.

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies used with the Kintsugi Inspirations dsp to make a cards, including a fun fold, for my August 2025 Classes

The vase was randomly stamped all over the 4⅜” by 2⅞” piece of Basic White card with Misty Moonlight ink. The panel was then glued to the Misty Moonlight layer and a Gold Foil triangle added to the upper left and lower right corners. The whole piece was then added to the card front on Dimensionals.

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies used with the Kintsugi Inspirations dsp to make a cards, including a fun fold, for my August 2025 Classes

The sentiment was stamped on the Petal Pink strip with Misty Moonlight ink. The strip of Misty Moonlight card was glued along the bottom before the whole piece was glued to the card front.

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies used with the Kintsugi Inspirations dsp to make a cards, including a fun fold, for my August 2025 Classes

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty fun fold card made using the Inspiring Imperfections stamp set and dies, Everyday Arches dies and Kintsugi Inspiration designer series paper from Stampin' Up!

Kintsugi Fun Fold Card- Share It Sunday Blog Hop

Posted on June 29, 2025June 25, 2025 by Mo Rootes

Hello and welcome to the Share It Sunday Blog Hop where we are sharing something we have been working on recently. I am sharing a Kintsugi fun fold card made using the Kintsugi Inspirations designer series paper and Everyday Arches dies.

Colours used to make my card are:

To recreate the kintsugi fun fold card, you will need:

Basic Beige card base – 8¼” by 5⅞” – scored at 4⅛” and 2 1/16th
Misty Moonlight card – 5⅝” by 1⅞”
Basic Beige card – 5½” by 1¾”
Misty Moonlight card – 5” by 3¾”
Basic White card – 4½” by 3¼”
Misty Moonlight card – 5⅝” by 3⅞”
Basic White card – 5½” by 3¾”
Basic White card – 1¼” by ¼”
Kintsugi Inspirations dsp

Using the Glass & Garden Embossing Folders I embossed the panel of Basic Beige card and glued the embossed panel to the slightly larger piece of Misty Moonlight card. The whole piece was then glued to the front panel of the card.

www.crafty-rootes.co.uk – The Inspiring Imperfections stamp set and dies, Everyday Arches dies and Kintsugi Inspiration designer series paper used to make a pretty fun fold card – Share It Sunday Blog Hop

I wrapped a length of Misty Moonlight Ribbon around the embossed layer securing it on the back with Sellotape. I glued the folded back panel of the Basic Beige card base to the card front to hide the ends of the ribbon.

The largest panel of Basic White card was adhered to the largest piece of Misty Moonlight card and glued to the inside of the card.

From the 5” by 3¾” piece of Misty Moonlight card I die cut a stitched arch. A slightly smaller arch was die cut from the 4½” by 3¼” piece of Basic White card. The arches were glued together and added to the left side of the card front.

Using the Inspiring Imperfections Dies I die cut a vase, a bowl and 2 chrysanthemum flowers from the Kintsugi Inspirations designer series paper. I added colour to the flowers using Petal Pink and Lost Lagoon Blends Pens. The vase, bowl and flowers were then added to the stitched arches on Dimensionals.

I stamped the sentiment, from the Cheers & Sips stamp set with Night of Navy ink onto the thin strip of Basic White before gluing the oval to the card front.

A trio of Metallic Adhesive-backed Sequins finished the card.

Please hop on to share the inspiration created by my crafty friends.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty get well card made using the Kintsugi Inspirations designer series paper used with the Hugs and Healing stamp set from Stampin' Up!

Get Well Kintsugi card

Posted on June 26, 2025June 17, 2025 by Mo Rootes

Today I am sharing a pretty, get well kintsugi themed card made using a sketch and the Kintsugi Inspirations designer series paper.

Colours used in this card are:

To recreate the get well kintsugi card, you will need:

Thick Basic card base – 8¼” by 5⅞” – scored at 4⅛”
Kintsugi Inspirations dsp – 4½” by 2¾”
Kintsugi Inspirations dsp – 3” by 2¼”
Basic White card – 3¼” by 2¼”
Basic White card – 1⅝” by ½”
Scrap Kintsugi Inspirations dsp

The larger piece of Kintsugi Inspirations designer series paper (dsp was glued to the front of the Thick Basic White card front.

www.crafty-rootes.co.uk – The Kintsugi Inspirations designer series paper used with the Hugs and Healing stamp set to make a pretty get well card

From the smaller piece of designer series paper I die cut a stitched rectangle using the Nested Essentials dies. This was added to the card front.

www.crafty-rootes.co.uk – The Kintsugi Inspirations designer series paper used with the Hugs and Healing stamp set to make a pretty get well card

Using the same set of dies I cut a stitched banner from the 3¼” by 2¼” piece of Basic White card which was then mounted onto the card front on Dimensionals.

www.crafty-rootes.co.uk – The Kintsugi Inspirations designer series paper used with the Hugs and Healing stamp set to make a pretty get well card

The beautiful bowl was die cut from scrap Kintsugi Inspirations dsp. I also die cut one of the pretty flowers from the same scrap dsp and added a little colour using the Petal Pink and Lost Lagoon Blends Pens. These pieces were then glued to the die cut stitched banner.

www.crafty-rootes.co.uk – The Kintsugi Inspirations designer series paper used with the Hugs and Healing stamp set to make a pretty get well card

I stamped the sentiment, from the Hugs & Healing stamp set with Misty Moonlight ink onto the small piece of Basic White card. I added a Gold Twisted Thread Bow to the card front and added the sentiment overtop.

www.crafty-rootes.co.uk – The Kintsugi Inspirations designer series paper used with the Hugs and Healing stamp set to make a pretty get well card

A trio of Tinsel Gems – from the 3 pack to complete the card.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x