Tag Archives: Valentine card

A card using the torn paper technique made using the Lovely Arrangements stamp set and the Thoughtful Journey dsp from Stampin' Up!

Torn Paper Effect Card – Technique Tuesday Blog Hop

Posted on by

Hello and welcome to the Technique Tuesday Blog Hop where we are sharing torn paper techniques. The version of the torn paper technique I am sharing was very popular two or three years ago, but I never got around to trying it……. now is my chance. I have used the Thoughtful Journey designer series paper (dsp) to make my card.

Colours found in this card are:

 

To recreate the torn paper effect card, you will need:

Thick Basic White card base – 8¼” by 5⅞” scored at 4⅛” on the long side
Misty Moonlight Two Tone card – 5½” by 3¾”
Thoughtful Journey dsp – 5¼” by 2¾”
Basic White card – 2 ¼” by ½”

 

The piece of Thoughtful Journey dsp was adhered to the front of the Thick Basic White card front.

 

A card using the torn paper technique made using the Lovely Arrangements stamp set and the Thoughtful Journey dsp from Stampin' Up!

www.crafty-rootes.co.uk – The Lovely Arrangements stamp set used with the Thoughtful Journey dsp to create a torn paper card – Technique Tuesday Blog Hop

I placed the panel of Misty Moonlight Two Tone card (lighter side uppermost) on top and worked out which part of the dsp I wanted to show and marked the card with a pencil.

 

A card using the torn paper technique made using the Lovely Arrangements stamp set and the Thoughtful Journey dsp from Stampin' Up!

www.crafty-rootes.co.uk – The Lovely Arrangements stamp set used with the Thoughtful Journey dsp to create a torn paper card – Technique Tuesday Blog Hop

I then carefully tore a strip down the centre of the card to just over half-way. Using a Bone Folder I curved the loose middle section and carefully rolled it up gluing it in place with Multipurpose Liquid Adhesive.

 

A card using the torn paper technique made using the Lovely Arrangements stamp set and the Thoughtful Journey dsp from Stampin' Up!

www.crafty-rootes.co.uk – The Lovely Arrangements stamp set used with the Thoughtful Journey dsp to create a torn paper card – Technique Tuesday Blog Hop

The whole panel was then glued to the card front, exposing the dsp underneath.

 

A card using the torn paper technique made using the Lovely Arrangements stamp set and the Thoughtful Journey dsp from Stampin' Up!

www.crafty-rootes.co.uk – The Lovely Arrangements stamp set used with the Thoughtful Journey dsp to create a torn paper card – Technique Tuesday Blog Hop

The sentiment, from the Lovely Arrangements stamp set was stamped on the small piece of Basic White card with Misty Moonlight ink. I flagged the end and glued it to the card front.

 

A card using the torn paper technique made using the Lovely Arrangements stamp set and the Thoughtful Journey dsp from Stampin' Up!

www.crafty-rootes.co.uk – The Lovely Arrangements stamp set used with the Thoughtful Journey dsp to create a torn paper card – Technique Tuesday Blog Hop

A row of Opal Rounds completed the card.



Blog Hop Index


Order goodies/Join My Team

I would love to be your demonstrator if you don’t already have one and live in the UK.  I would also be delighted to send you a catalogue if you do not have a demonstrator. I would be happy to place an order for you, or you can order directly by clicking on the “shop online” button.

 

Contact me for information about joining my team or click on the ‘Join My Team’ button

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A cute 'love ewe' card made using the Woolly Friends stamp set and Woolly Friends Builder Punch from Stampin' Up!

Love Ewe Card – Ink. Stamp. Share Blog Hop

Posted on by

Hello and welcome to the Ink. Stamp. Share Blog Hop where we are sharing Valentine or thinking of you cards. I have made my card using the adorable Woolley Friends stamp set and co-ordinating punch.

Colours used to make this card are:

 

To recreate the love ewe card, you will need:

Shaded Spruce card base – 8¼” by 5⅞” scored at 4⅛”
Gorgeous Grape card – 5⅛” by 3⅜”
Basic White card – 5” by 3¼”
Strips of Perennial Lavender dsp – 4” by ⅜” – about 8
Basic White card – 5½” by 3¾” for the inside
Scrap Basic White card

 

The strips of Perennial Lavender dsp were glued to the 5” by 3¼” panel of Basic White card, each one at a jaunty angle. The excess was trimmed off and the panel glued to the Gorgeous Grape layer. I adhered the whole panel to the Shaded Spruce card front.

 

A cute 'love ewe' card made using the Woolly Friends stamp set and Woolly Friends Builder Punch from Stampin' Up!

www.crafty-rootes.co.uk – The Woolly Friends stamp set and Woolly Friends Builder Punch used to make a cute ‘love ewe’ card – Ink. Stamp. Share Blog Hop

The body and head of the sheep were stamped in Memento Tuxedo Black ink onto scrap Basic White card. I punched them out using the Woolly Friends Builder Punch.

 

A cute 'love ewe' card made using the Woolly Friends stamp set and Woolly Friends Builder Punch from Stampin' Up!

www.crafty-rootes.co.uk – The Woolly Friends stamp set and Woolly Friends Builder Punch used to make a cute ‘love ewe’ card – Ink. Stamp. Share Blog Hop

A little colour was added to the body and head of the sheep with a Light Crumb Cake Blends Pen. I added the body and head to the card front on Dimensionals.

 

A cute 'love ewe' card made using the Woolly Friends stamp set and Woolly Friends Builder Punch from Stampin' Up!

www.crafty-rootes.co.uk – The Woolly Friends stamp set and Woolly Friends Builder Punch used to make a cute ‘love ewe’ card – Ink. Stamp. Share Blog Hop

The bow was stamped on Basic White card in Memento Tuxedo Black ink and the infill colour added in Highland Heather. I punched it out using the same punch Ns glued it into position.

 

A cute 'love ewe' card made using the Woolly Friends stamp set and Woolly Friends Builder Punch from Stampin' Up!

www.crafty-rootes.co.uk – The Woolly Friends stamp set and Woolly Friends Builder Punch used to make a cute ‘love ewe’ card – Ink. Stamp. Share Blog Hop

I stamped the word LOVE, from the Friendly Foliage stamp set onto scrap Basic White card using Shaded Spruce ink. The word EWE, from the Woolly Friends stamp set was stamped with the same ink on the same piece of scrap card. I trimmed them out and added them to the card front.

 

A cute 'love ewe' card made using the Woolly Friends stamp set and Woolly Friends Builder Punch from Stampin' Up!

www.crafty-rootes.co.uk – The Woolly Friends stamp set and Woolly Friends Builder Punch used to make a cute ‘love ewe’ card – Ink. Stamp. Share Blog Hop

A trio of gems from my stash completed the card.

Please hop on to share the inspiration provided by my crafty friends.

 

Blog Hop Index


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A love you planter card made for the 'love is in the Air' Stamping Dreams Blog Hop using the Planted Paradise stamp set by Stampin' Up!

Love You Planter for the Stamping Dreams Blog Hop

Posted on by

Hello and welcome to the Stamping Dreams Blog Hop where we are sharing ‘love is in the air’ themed projects. I am sharing a Valentine’s Day card made for my lovely husband, using the Planted Paradise and Lifetime of Love stamp sets.

 

Colours used in this card are:

 

To recreate the love you planter card, you will need:

Lemon Lime Twist card base – 8¼” by 5⅞” – scored at 4⅛
Pebbled Path card – 5⅝” by 3⅞”
Basic White card – 5½” by 3¾”
Pebbled Path card – 2⅞” by 2⅛”
Basic White card – 3¼” by 2½”
Pebbled Path card – ⅜” strip
Basic White card – 5½” by 3¾” – for the inside

 

Using the Perennial Postage Dies I die cut a rectangular label from the 3¼” by 2½” panel of Basic White card.

 

 

A love you planter card made for the 'love is in the Air' Stamping Dreams Blog Hop using the Planted Paradise stamp set by Stampin' Up!

www.crafty-rootes.com – The Planted Paradise stamp set used to make a love you planter card for the ‘love is in the Air’ Stamping Dreams Blog Hop

On the label I stamped the flower pot in Pebbled Path ink. I added the leaves with Lemon Lime Twist  and Garden Green inks. I masked off the top of the pot with a Post It Note. The label was then glued to the 2⅞” by 2⅛” piece of Pebbled Path card.

 

A love you planter card made for the 'love is in the Air' Stamping Dreams Blog Hop using the Planted Paradise stamp set by Stampin' Up!

www.crafty-rootes.com – The Planted Paradise stamp set used to make a love you planter card for the ‘love is in the Air’ Stamping Dreams Blog Hop

I placed the decorated panel on the 5½” by 3¾” panel of Basic White card, roughly where I planned to adhere it. I then stamped the leaves in the upper left and lower right corners of the topper. The topper was then added to the panel on Dimensionals. The whole panel was glued to the larger Pebbled Path layer and then to the Lemon Lime Twist card front.

 

A love you planter card made for the 'love is in the Air' Stamping Dreams Blog Hop using the Planted Paradise stamp set by Stampin' Up!

www.crafty-rootes.com – The Planted Paradise stamp set used to make a love you planter card for the ‘love is in the Air’ Stamping Dreams Blog Hop

The sentiment, from the Lifetime of Love stamp set was stamped in Versamark ink onto a scrap ⅜” strip of Pebbled Path card. I covered it with White Embossing Powder and heat set it. I cut the sentiment apart and added it to the card front.

 

A love you planter card made for the 'love is in the Air' Stamping Dreams Blog Hop using the Planted Paradise stamp set by Stampin' Up!

www.crafty-rootes.com – The Planted Paradise stamp set used to make a love you planter card for the ‘love is in the Air’ Stamping Dreams Blog Hop

A trio of Tinsel Gems and a Bakers’ Twine bow completed the card.

 

A love you planter card made for the 'love is in the Air' Stamping Dreams Blog Hop using the Planted Paradise stamp set by Stampin' Up!

www.crafty-rootes.com – The Planted Paradise stamp set used to make a love you planter card for the ‘love is in the Air’ Stamping Dreams Blog Hop

Please hop over to see what my crafty friends have been making.

 

Blog Hop Index


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

Playful Valentine card

Posted on by

Today I am sharing the card I made my husband for Valentine’s Day using the Playful Alphabet dies, Window Sheet and strips of card. This card was inspired by a Youtube video by fellow demonstrator Angie of Stamping With Amore.

Colours used in today’s project are:

 To recreate the Playful Valentine card. You will need:

Thick Basic White card base – 8¼” by 5⅞” – scored at 4⅛”
Window Sheet – 4⅛” by 2¼”
Misty Moonlight – 4⅛” by ⅜”
Panels of Misty Moonlight, So Saffron, Pacific Point, Old Olive & Balmy Blue 2½” wide
Scrap Basic White

Taking the 2½” wide strips of card stock I cut them down into thin strips, wider at one end than the other.

A lovely masculine themed Valentine card using Window Sheet, Palyful Alphabet dies and some scrap card

www.crafty-rootes.com – Playful Alphabet Dies, Window Sheet and card stock scraps make a lovely masculine Valentine card

I added strips of Tear & Tape Adhesive down the length of each strip and added them to the Window Sheet panel leaving a small gap between each strip. I trimmed off the excess using sharp scissors.

A lovely masculine themed Valentine card using Window Sheet, Palyful Alphabet dies and some scrap card

www.crafty-rootes.com – Playful Alphabet Dies, Window Sheet and card stock scraps make a lovely masculine Valentine card

Dimensionals and Mini Dimensionals were then added to the Window Sheet behind the card stock strips, so they would be hidden and the whole panel adhered to the card front.

A lovely masculine themed Valentine card using Window Sheet, Palyful Alphabet dies and some scrap card

www.crafty-rootes.com – Playful Alphabet Dies, Window Sheet and card stock scraps make a lovely masculine Valentine card

Taking the scrap Basic White and the Playful Alphabet Dies I cut out letters LOVE three times. The letters were then stacked on top of each other with Multipurpose Liquid Adhesive before being added to the card front.

A lovely masculine themed Valentine card using Window Sheet, Playful Alphabet dies and some scrap card

www.crafty-rootes.com – Playful Alphabet Dies, Window Sheet and card stock scraps make a lovely masculine Valentine card

I inked the word YOU from the Well Said stamp set in Versamark ink and stamped it onto the long strip of Misty Moonlight. The sentiment was then covered with White Embossing Powder and heat setting it with my Heat Tool.

A lovely masculine themed Valentine card using Window Sheet, Playful Alphabet dies and some scrap card

www.crafty-rootes.com – Playful Alphabet Dies, Window Sheet and card stock scraps make a lovely masculine Valentine card

The strip was added to the card front with the liquid glue.

A lovely masculine themed Valentine card using Window Sheet, Playful Alphabet dies and some scrap card

www.crafty-rootes.com – Playful Alphabet Dies, Window Sheet and card stock scraps make a lovely masculine Valentine card

I hop you like the card.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

GDPR

Thanks for visiting my blog today, I love to read what you think of my projects so please do let me know. In line with new Data Protection Legislation (GDPR), by commenting you do so in the knowledge that your name & comment are visible to all who visit this blog and you thereby consent to the use of that personal information for that specific purpose. Please stop by again soon.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A Valentine card made for my husband using the Rooted In Nature stamp set by Stampin' Up!

Rooted In Nature non-traditional Valentine Card

Posted on by

Today I am sharing the Valentine’s card I made for my husband. It is a non-traditional valentine card as he would hate a lovey dovey, hearts and flowers card.  I used the Rooted In Nature stamp set to make a card featuring leaves and nature which he loves.

Making the non-traditional Valentine card

I started with a panel of Whisper White cardstock measuring 5⅞” by 2⅛”. I selected a variety of leaves from the Rooted In Nature stamp set and chose a variety of green inks with which to stamp them, starting with the largest images and filling up the space with the smaller leaves. The inks I used were Shaded Spruce, Old olive, Pear Pizzazz and Soft Sea Foam, I deliberately overlapped some of the images to give a fuller look.

A non-traditional Valentine card made for my husband using the Rooted In Nature stamp set by Stampin' Up!

www.crafty-rootes.com – the Rooted In Nature stamp set by Stampin’ Up! used for a non-traditional Valentine card

When the ink was dry I rubbed over the panel with my Embossing Buddy before stamping one of the images again in Versamark ink. I covered the panel with Gold Embossing Powder and heat set it using my Heat Tool. So pretty….

A non-traditional Valentine card made for my husband using the Rooted In Nature stamp set by Stampin' Up!

www.crafty-rootes.com – the Rooted In Nature stamp set by Stampin’ Up! used for a non-traditional Valentine card

I cut a panel of Shaded Spruce at 5⅞” by 2⅜”and adhered it to the back of the stamped and embossed layer with Multipurpose Liquid Adhesive. I cut a piece of Gold Foil at 5⅞” by ½” and added it to the right hand side of the panel before adhering the whole piece to a Soft Sea Foam card base.

A non-traditional Valentine card made for my husband using the Rooted In Nature stamp set by Stampin' Up!

www.crafty-rootes.com – the Rooted In Nature stamp set by Stampin’ Up! used for a non-traditional Valentine card

I cut a strip of Vellum 2⅛ by 1” and stamped the word YOU from the Well Said stamp set in Versamark ink, covered it with Gold Embossing Powder and heat set it with my Heat Tool. I die cut the word LOVE from a scrap of Shaded Spruce cardstock using the Well Written framelit dies and my Big Shot. I added the die cut to the vellum using tiny dots of Multipurpose Liquid Adhesive. I added the vellum panel to the card front with tiny dots of Multipurpose Liquid Adhesive hidden behind the words.

I am really happy with this non-traditional Valentine card and I am sure my husband will like it too.

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you.

Thanks for visiting my blog today, I love to read what you think of my projects so please do let me know. In line with new Data Protection Legislation (GDPR), by commenting you do so in the knowledge that your name & comment are visible to all who visit this blog and you thereby consent to the use of that personal information for that specific purpose. Please stop by again soon.

Details of the products I used for this project can be found below.

Mo x

Supplies used: