Category Archives: Occasions

Wintery box

Hometown Greetings for a secret Santa box

Posted on by

Today I am sharing the box I made for my team secret Santa gift. This box proved amazingly popular with the team members.To make it you will need the following;
Night of Navy cardstock 10¾ by 10¾
Whisper white cardstock 7⅜ by 7⅜
Whisper White cardstock pieces 4” by 3” x 5
Emerald Envy cardstock 3″ by 3″
Night of Navy cardstock 3″ by 3″
Whisper White cardstock 3″ by 3″
Scraps of Emerald Envy cardstock

I have added photo’s to the description but have used lighter coloured cardstock as the score lines show up better.

Score Lines for a box base

www.crafty-rootes.com – Secret Santa box made using Hometown Greetings dies by Stampin’ Up!

Start by using the Simply Scored Scoring Tool to score the 10¾” by 10¾” piece of Night of Navy cardstock at 3¾” and 7” then rotate the cardstock 90⁰ and score at 3¾” and 7” again – ignore the extra partial line on the right, it was a mistake!!!

Making a box base

www.crafty-rootes.com – secret Santa box using Hometown Greetings dies by Stampin’ Up!

Using scissors cut up each of the vertical lines but only as far as the horizontal line – see picture. Then take a small wedge from the right and left side of each of the 4 tabs and trim about 1″ from each tab to make them shorter. Fold and burnish on the score lines. Using strong adhesive, Tear and Tape or Fast Fuse; stick each of the tabs to the inside to form a sturdy box base.

Making a box base

www.crafty-rootes.com – secret Santa box using Hometown Greetings dies by Stampin’ Up!

Next, score the 7⅜” by 7⅜” piece of Whisper White cardstock at ½” and 2” on all 4 sides.

Making a box top

www.crafty-rootes.com – secret Santa box using Hometown Greetings dies by Stampin’ Up!

Cut the tabs as shown in the picture.

Making a box lid

www.crafty-rootes.com – secret Santa box using Hometown Greetings dies by Stampin’ Up!

Fold and burnish on all the score lines. Apply a strong adhesive, Tear and Tape or Fast Fuse to the back of the 4 tabs and to the front of the 1/2″ score lines which will be folded over inside the lid to re-enforce the top.

Using the Hometown Greetings dies and the 5 pieces of 4” by 3” Whisper White cardstock and a Big Shot, die cut out the rows of houses.

side of a box

www.crafty-rootes.com – secret Santa box using Hometown Greetings dies by Stampin’ Up!

I cut out the church row once, the row of larger houses 3 times and the smaller houses once. The pieces will be longer than you need, you can trim them to size. Also die cut the trees using a scrap of Emerald Envy cardstock, these can be glued on top of the white trees with Tombow Liquid Adhesive.

Box side 2

www.crafty-rootes.com – secret Santa box using Hometown Greetings dies by Stampin’ Up

Christmas scene

www.crafty-rootes.com – secret Santa box using Hometown Greetings dies by Stampin’ Up!

Christmas box

www.crafty-rootes.com – secret Santa box using Hometown Greetings dies by Stampin’ Up!

Take one of the rows of larger houses and die cut with a 2¾” Layering Circle Die. Glue this to the same size die cut circle from Night of Navy cardstock. Then add this to a slightly larger scalloped circle die cut from Emerald Envy cardstock and the Layering Circles dies.

 

Winter themed box lid

www.crafty-rootes.com – secret Santa box made using Hometown Greetings dies by Stampin’ Up!

I took each of the die cut rows of houses and ‘scribbled’ all over them with Tombow Liquid Adhesive and sprinkled them with lots of Dazzling Diamonds Glitter.  The gorgeous, glittery houses can then be added to the sides of the box with Tombow Liquid Adhesive. The Layered Circles were then added to the top of the box with Stampin’ Dimensionals. The box held a gorgeous candle surrounded by a wintery scene.

Wintery box

www.crafty-rootes.com – secret Santa box made using Hometown Greeting dies by Stampin’ Up!

Thanks for stopping by my blog today, if you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and you would like one, please let me know and I will send one to you.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you.

Details of the products I used for this project can be found below. Please visit my blog again soon.

Mo x

Supplies used:
Dies
Hometown Greetings Framelits & Layering Circle Framelits
Cardstock
Night of Navy, Emerald Envy & Whisper White
Tools
Simply Scored Scoring Tool and Stylus, Big Shot, Precision Base Plate, Paper Trimmer, Stampin Scrub and Stampin Mist, Paper Piercer, Bone folder and Scissors
Adhesives
Fast Fuse, Tombow Liquid Adhesive & Stampin’ Dimensionals
Accessories
Dazzling Diamonds Glitter, Grid Paper

Card with quilted effect Christmas trees

Quirky Quilted Christmas Trees

Posted on by

I have been using the Christmas Quilt stamp set today to make a last minute Christmas card.

I stamped the tiny patterned triangles using Old Olive ink onto a scrap of Whisper White cardstock then added the solid triangles using the Cherry Cobbler ink pad before die cutting the ‘tree’ shape using the Quilt Builder Dies. I also die cut a ‘tree’ in Old Olive using one of the patterns from the Merry Little Christmas DSP .

Christmas tree bauble card

www.crafty-rootes.com – Christmas Quilt stamp set by Stampin’ Up!

I die cut a stitched oval using the Layering Oval Framelits from scrap Whisper White cardstock and mounted it onto a scalloped oval die cut from the same set using Lemon Lime Twist cardstock using Tombow Liquid Adhesive.

Cute Christmas card

www.crafty-rootes.com – Christmas Quilt stamp set by Stampin’ Up!

I added the old olive tree to the right side of the oval with Tombow and the stamped tree to the left side of the oval with Stampin’ Dimensionals after adding the tree stand in Chocolate Chip ink.

Card with quilted effect Christmas trees

www.crafty-rootes.com – Christmas Quilt stamp set by Stampin’ Up!

Taking the ‘stitched triangle’ image I stamped in Old Olive ink all over a Cherry Cobbler card base to add some texture to the card. I inked up part of the sentiment from the Cookie Cutter Christmas stamp set using an Old Olive Marker – a great option if you only want some of the words, and stamped it onto a ¼” strip of Whisper White and added it to the card front with Tombow Liquid Adhesive. The oval topper was then added on Stampin’ Dimensionals. A bow made from ⅛” Gold Metallic Ribbon was added to the top of the oval using a Mini Glue Dot.

Such a cute card. Hope you like it.

Thanks for stopping by my blog today, if you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and you would like one, please let me know and I will send one to you.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you.

Details of the products I used for this project can be found below. Please visit my blog again soon.

Mo x

Supplies used:
Stamp sets
Christmas Quilt & Cookie Cutter Christmas
Dies
Quilt Builder Framelits, Layering Ovals dies & Stitched Shapes framelits
Cardstock
Cherry Cobbler, Lemon Lime Twist & Whisper White
Designer Series Paper (DSP)
Merry Little Christmas
Ink Pads
Cherry Cobbler, Old Olive & Chocolate Chip
Markers
Old Olive
Tools
Big Shot, Paper Trimmer, Stampin Scrub and Stampin Mist, Paper Piercer, Bone folder and Scissors
Acrylic Blocks
B, B, B & H
Adhesives
Tombow Liquid Adhesive, Mini Glue Dots & Stampin’ Dimensionals
Accessories
⅛” Gold Metallic Ribbon, Grid Paper, Whisper White Envelopes

Bloomin’ Love for 2 gorgeous rustic style wedding cards

Posted on by

I was lucky enough to be invited to 2 weddings over the last few days, how fortunate am I, love a wedding. Both couples had a rustic theme, kraft cardstock, very vanilla and a pop of colour. With that ‘natural look’ in mind I made a wedding card for each couple.

Both cards are very similar and start with a Crumb Cake card base. Next I took a Crumb Cake panel 5” by 3¼”and stamped randomly all over the upper two thirds in Crumb Cake ink using many of the small images from the Bloomin’ Love stamp set to create the effect I wanted and I was really happy with the result.

www.crafty-rootes.com – Bloomin’ Love by Stampin’ Up!

I took a small piece of Very Vanilla cardstock 3¼” by 2”and ran it through the Big Shot using the Ruffled Dynamic Textured Embossing Folder, love the effect this gives, and added it to the lower third of the panel with Tombow Liquid Adhesive. I added the whole piece to a Very Vanilla panel 5⅛” by 3⅜” then to a piece of Night of Navy cardstock 5¼” by 3½” to match the colours the bride had chosen for her theme. I used some of the lovely soft Very Vanilla Lace Ribbon to tie into a bow around the topper which gives the card a more finished look, tying the top and the bottom together.

www.crafty-rootes.com – Bloomin’ Love by Stampin’ Up!

The whole piece was added to the Crumb Cake card base using Stampin’ Dimensionals. The sentiment from the Dragonfly Dreams stamp set was stamped in Night of Navy ink onto a scrap of Very Vanilla cardstock and trimmed with scissors. It was added to the card front using Tombow Liquid Adhesive.

www.crafty-rootes.com – Bloomin’ Love by Stampin’ Up!

For the second card I substituted Old Olive ink and cardstock instead of the Night of Navy and added an extra Very Vanilla cardstock panel between the topper and the Crumb Cake card base.

www.crafty-rootes.com – Bloomin’ Love by Stampin’ Up!

I was really happy with the way the cards turned out, I hope you like them.

Thanks for stopping by my blog today, if you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and you would like one, please let me know and I will send one to you.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. If you are local please check out my classes and events using the button at the top of the page or leave me a comment.

Details of the products I used for this project can be found below. Please visit my blog again soon.

Mo x

Supplies used:
Stamp sets
Bloomin’ Love Dragonfly Dreams & Beautiful You
Cardstock
Card 1 – Crumb Cake, Night of Navy, Very Vanilla
Card 2 – Crumb Cake, Old Olive, Very Vanilla
Ink Pads
Card 1 – Crumb Cake & Night of Navy
Card 2 – Crumb Cake & Old Olive
Embossing Folder
Ruffled
Tools
Stampin’ Trimmer, Stampin Scrub and Stampin Mist, Big Shot, Bone Folder, Paper Piercer and Scissors
Acrylic Block
A, A, A, B & D
Adhesives
Tombow Liquid Adhesive
Accessories
Very Vanilla Lace Ribbon & Very Vanilla Envelopes

Cutie Pie Christmas Trees

Posted on by

I know Christmas has now been and gone but I couldn’t resist using the Cutie Pie die to make 2 more Christmas Tree themed boxes for the ladies craft group.

The first box is made using the Cutie Pie Die set and Lost Lagoon cardstock. I also die cut the triangle from the same set of dies from Night of Navy cardstock and adhered this to the front of the box with Tombow liquid adhesive.

1-DSCF7247

A tree from the Peaceful Pines stamp set was stamped in Mint Macaron ink and die cut using the co-ordinating Perfect Pines Framelit dies. I mounted the die cut tree on Stampin Dimensionals, offset to the right, on the box front. To hold the box closed, I wrapped Gold Cording Trim around 4 times and tied in a bow. The cording trim, both gold and silver are retiring on the 4th January so get them in my online shop while you still can.

1-DSCF7240

The second box is very simple but effect. The die is cut from Garden Green cardstock and embellished using the Real Red and Very Vanilla Enamel Dots from the Home for Christmas suite which retires on the 4th January 2016, so if you like them go to my online shop and get them before they are gone. I used the ¼” Hand Held Punch to punch some circles from Gold Glimmer cardstock to give a little bling to the box. The box is topped by a Gold Glimmer star which was die cut using the smallest of Stars Framelits.

I just love using this die set for Christmas projects and can’t wait to try some summer cake box ideas out in the coming months.

I am looking forward to a bit more normality over the next few weeks and wish Happy New Year to everyone kind enough to visit this blog and many happy hours crafting.

Mo x

New Year Irresistible cards

Posted on by

Well, Christmas is over and the New Year is rapidly approaching. This year a group of us are gathering at a friend’s house to see in the New Year with a pot luck supper. Even better, we all live in the village so no one needs to drive. Happy Days…

To mark the occasion I decided to make each couple a New Year card.

1-DSCF7243

In my stash, I found some Irresistibly Yours dsp from the 2015, Sale-a-Bration brochure and although this dsp is now retired, you could substitute a pattern from the Color Me irresistible Specialty dsp, found on page142 in the annual catalogue. This lovely paper is amazingly versatile as it can be sponged, spritzed, water coloured or inked in any colour to match your project.

I chose the starry pattern for my cards as this reminded me of fireworks and long nights. I sponged each piece of dsp in either Soft Sky, Pool Party, Pear Pizzazz, Rich Razzleberry or Calypso Coral ink using Stampin sponges. I then stamped the sun image from the Kinda Eclectic stamp set with Crushed Curry ink. Using a piece of kitchen towel I wiped over the inked and stamped dsp to remove the excess ink from the embossed areas, revealing the glossy white stars.

1-DSCF7244

I die cut the 2016 using the Little Numbers Thinlits and Gold or Black Glimmer cardstock and added the HAPPY from the Crazy For You stamp set.

I mounted the dsp onto and added the panel to Thick Whisper White cardstock bases with dimensionals. Inside the card I stamped the happy new year greeting from the Teeny Tiny Sentiments stamp set. I tamped the sun image from the Kinda Eclectic stamp set inside each card and on the envelope as a finishing touch.

New Year cards

New Year cards

I am really happy with the cards, love the colours and a sparkly glimmer paper numbers. Really hope my friends like them. I hope you all have a happy and healthy New Year

Mo x

Cutie Pie Christmas Packaging

Posted on by

Still on the theme of Christmas and inspired by my upline Mikaela Titheridge http://thecraftyoinkpen.blogspot.co.uk/2015/12/christmas-gift-packaging-voucher.html, I decided to make some Christmas boxes using the Cutie Pie die set. I bought this set a while ago but this is the first time I have used it and I have to say I love it.

Cutie Pie Christmas

Cutie Pie Christmas

The boxes are so easy to put together and the shape is much more versatile than it appears at first glance.

1-DSCF7239

The first Cutie Pie box I made was a CASE of a project on Mikaela’s blog.

I used the retired Naturals White cardstock which I absolutely loved. I was so sad when this retired from the catalogue in June. You could however, use any cardstock for this project. I used the large snowflake from the Holly Jolly Greetings stamp set stamped in Cherry Cobbler ink. I randomly stamp the tiny snowy star image from the same set in Sahara Sand ink as a background. To give some dimension to the box I attached one of the larger Snowflake Elements with a glue dot and added a basic rhinestone for the obligatory Christmas bling. A piece of retired Cherry Cobbler Ribbon was used to tie around the box.
1-DSCF7238

I decided to try the box again in a different colour and with different ribbon on the same cardstock. I used Cucumber Crush, one of the 2015 – 2017 in colours for the stamped snowflake and added a smaller wooden snowflake from my stash with a dimensional. I coloured the wooden snowflake using my Craft Whisper White ink and added a basic rhinestone. The background snowy stars I again stamped using Sahara Sand ink. The soft bow was made using the Dotted Lace Trim in Cucumber Crush. I think this colourway looks very fresh and modern compared to the richer Cherry Cobbler version, loved them both.

Mo x

Christmas Twist-Topped Boxes

Posted on by
Twist-topped box in 3 sizes decorated for Christmas using Flurry of Wishes and Snow Place stamp sets and Merry Moments dsp

Twist-topped box in 3 sizes

I love Christmas and this year it will go on until the end of January 2016 …. Whoo hoo. I have been asked to do a workshop for a group of local crafters who meet monthly to create a stock of Christmas goodies for their church Christmas Fair. I have been asked to come up with some new ideas for them to try.

First out of the starting block is a tall thin box inspired by Lea Denton – The Crafty Spark

. The box measures 1¼” wide by 1¼” deep by 5¼” high with the twisted top adding another 1½”

Night of Navy cardstock stamped in versamark ink and heat embossed using silver embossing powder. Snowflakes come from the Flurry of Wishes set

Like Lea, I used Night of Navy cardstock and stamped the 2 smaller snowflakes from the Flurry of Wishes stamp set in Versamark Ink. I then heat embossed with silver embossing powder, I love the effect this gives, so sophisticated, festive and shiny. The twisted top closure of the box was tricky to master but looked amazing when I finally got the hang of it. I loved the shape of the box and decided to try shrinking it down.

The second box is also 1¼” wide by 1¼” deep but is only 4” high with the twisted top adding another 1½”. I used Pool Party cardstock and the characters from the Snow Place stamp set. Using Pool Party ink I stamped the snowflake cluster from the stamp set onto the Pool Party cardstock to give a muted tone on tone effect. I stamped the penguin, the large snowman and 2 of the smaller snowmen using the Basic Black Archival Ink and die cut them using the co-ordinating Snow Friends dies. I stamped all their really cute accessories using Real Red and Pool Party ink before die cutting them. I couldn’t resist die cutting a top hat for the large snowman from the gorgeous black glimmer cardstock, which is sadly, retiring from the catalogue on the 4th January 2016. Such a fun looking box which would be great for a child’s stocking.

Pool Party cardstock with die cut characters from the Snow Place stamp set

I couldn’t resist shrinking it again…I know, I need to get a life… This final box is 3” high with the other dimensions remaining the same. I used Real Red cardstock for this last box and used it to showcase the Merry Moments dsp. A simple but lovely box.

This is such a versatile box and could easily be adapted for any season. I love them all and hope you do to.

Real Red cardstock with Merry Moments dsp

Mo x