A gorgeous double Z fold Christmas card featuring Playful Penguins by Stampin' Up!

Hopping Around the World

Posted on October 26, 2019October 24, 2019 by Mo Rootes

Welcome to the first ever ‘Hopping Around the World’ Blog Hop where our theme is Christmas cards………..so exciting…….I love Christmas!!! If you have hopped over from Jennifer Downey or started with me – WELCOME and enjoy the hop.

For the hop I am sharing a card made for a lovely friend to give to her son and his family at Christmas. I chose to make it using the Playful Penguins stamp set……after all who doesn’t love a penguin.

To recreate the Hopping Around the World Playful Penguin double Z fold card you will need:

Thick Whisper White card base 11” by 5½” – scored at 2¾” and 5½”
Let It Snow designer series paper (dsp) – one piece at 5¼” by 5¼” and two pieces at 5¼” by 2½”

Seaside Spray 9¼” by 4¼” – scored at 2¾” and 5½” – all upper corners rounded
Blueberry Bushel – one piece at 4” by 3½” and two at 4” by 2½” – all upper corners rounded
Whisper White – one piece at 3⅞” by 3⅜” and two at 3⅞” by 2⅜” – all upper corners rounded
Scrap Whisper White cardstock

I folded and burnished the score lines of the Thick Whisper White cards base and glued the panels of Let It Snow dsp to it before setting it to one side. I folded and burnished the scorelines of the Seaside Spray piece and added the Blueberry Bushel panels using Multipurpose Liquid Adhesive.

www.crafty-rootes.com – A double Z fold card featuring the Playful Penguins stamp set for the Hopping Around the World Blog Hop

I stamped one of the cute penguins on the larger Whisper White panel using Memento Tuxedo Black ink. Using the Seaside Spray ink pad and a sponge I added colour to the panel around the penguin and stamped some ‘ground’ in 2^nd and 3^rd generation Memento Tuxedo Black ink. I stamped the tiny stars from the Most Wonderful Time stamps set in the upper right corner of the panel in Blueberry Bushel ink for a little added interest.

www.crafty-rootes.com – A double Z fold card featuring the Playful Penguins stamp set for the Hopping Around the World Blog Hop

I used the Make a Difference stamp set to stamp the ‘Son and family’ – it was the first time I had used this stamp set and I was delighted to find the letters so easy to line up. I punched the sentiment with 1½” Circle Punch and added it to the panel with Dimensionals.

www.crafty-rootes.com – A double Z fold card featuring the Playful Penguins stamp set for the Hopping Around the World Blog Hop

Another penguin was stamped on scrap Whisper White cardstock in Memento Tuxedo Black ink and cut out with sharp scissors. The penguin was added to the stamped panel on Dimensionals. The layer was then mounted onto the larger Blueberry Bushel layer using multipurpose liquid adhesive.

www.crafty-rootes.com – A double Z fold card featuring the Playful Penguins stamp set for the Hopping Around the World Blog Hop

A penguin was stamped on one of the smaller Whisper White panels in Memento Tuxedo Black ink, ground added in 3^rd generation of the same ink and stars added as before with Blueberry Bushel ink. The stamped piece was then added onto the last Blueberry Bushel layer with liquid adhesive.

www.crafty-rootes.com – A double Z fold card featuring the Playful Penguins stamp set for the Hopping Around the World Blog Hop

The sentiment from the Perfectly Plaid stamp set was stamped in Blueberry Bushel ink on the remaining Whisper White layer and adhered to the middle panel.

The Seaside Spray/Blueberry Bushel layer was then adhered to the Thick Whisper White card base with Multipurpose Liquid Adhesive.

www.crafty-rootes.com – A double Z fold card featuring the Playful Penguins stamp set for the Hopping Around the World Blog Hop

To finish the card off I added a trio of In Color Faceted Dots to the front panel, added some retired Black Rhinestones for the Penguins eyes and covered all three penguins in Clear Wink of Stella. To finish the card I coloured in the beak of all three penguins using the light So Saffron Blends Marker Pen. I still felt something was missing and ended up adding some of the lovely Snowflake Sequins. I made an envelope for the card using retired dsp and my Envelope Punch Board.

Such a pretty card, I do hope you and my lovely friend like it.

Next up is Sandra Herzog and I am looking forward to seeing what she shares with us today.

f you don’t have a Stampin’ Up! Demonstrator and live in the UK I would love to be yours! If you don’t have a catalogue and live in the UK please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you.

Thanks for visiting my blog today, I love to read what you think of my projects so please do let me know. In line with new Data Protection Legislation (GDPR), by commenting you do so in the knowledge that your name & comment are visible to all who visit this blog and you thereby consent to the use of that personal information for that specific purpose. Please stop by again soon.

Details of the products I used for this project can be found below.

Mo x

Supplies used

A lovely Christmas card made for the Case your own card Stamp 'n Hop Blog Hop

Peaceful Boughs for the Stamp ‘N’Hop Blog Hop

Posted on October 12, 2019September 30, 2019 by Mo Rootes

Welcome to the October Stamp ‘n Hop Blog Hop where our theme this month is ‘ CASE your own card’. If you have come from the lovely Sandra Herzog I am sure you loved her project. You are currently visiting Mo Rootes from near Cambridge in the UK. I hope you like what I am sharing today.

I chose to CASE a card made for my August classes. I love this card design, it is so simple but really effective. I have used the lovely new Peaceful Boughs stamp set for the updated project.

To recreate the Peaceful Boughs card you will need:

Thick Whisper White card base – 8¼” by 5⅞” scored at 4⅛” – rounded right lower corner
Whisper White – 5⅝” by 3⅞” – rounded right lower corner x 2
Whisper White – 3⅞” by 1”
Noble Peacock Foil – 3⅞” by ⅜” x 2

I began by using a PostIt Note to mask off a 1” strip on one of the Whisper White panels.

www.crafty-rootes.com – Stamp ‘n Hop Blog Hop CASE your own card using the Peaceful Boughs stamp set

I stamped the both the large and small pinecones randomly above and below the masked area using Soft Suede ink. These pinecones are so realistic aren’t they? The PostIt mask was then removed.

The sentiment from the Perfectly Plaid stamp set was stamped on the 1” strip in Soft Suede ink.

www.crafty-rootes.com – Stamp ‘n Hop Blog Hop CASE your own card using the Peaceful Boughs stamp set

The strips of Noble Peacock Foil were then added to the top and bottom of the sentiment strip with Multipurpose Liquid Adhesive.

www.crafty-rootes.com – Stamp ‘n Hop Blog Hop CASE your own card using the Peaceful Boughs stamp set

The sentiment panel was then was added to the stamped panel on Dimensionals. The whole piece was glued to the Bermuda Bay card base using the same iquid adhesive. A trio of Noble Peacock Rhinestones were added to the card front.

www.crafty-rootes.com – Stamp ‘n Hop Blog Hop CASE your own card using the Peaceful Boughs stamp set

I stamped a large and small pinecone onto the remaining Whisper White panel and adhered it inside the card. The same stamps were used to decorate the envelope.

www.crafty-rootes.com – Stamp ‘n Hop Blog Hop CASE your own card using the Peaceful Boughs stamp set

I do hope you like my card. Please continue on to see what Narelle Fasulo has to share with us.

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A Christmas stamp set used to make a cute Anniversary card for the Stamp 'n Hop blog hop

Cup of …………Anniversary?

Posted on September 14, 2019September 4, 2019 by Mo Rootes

Welcome to the September Stamp ‘n Hop Blog Hop where our theme this month is ‘ any stamp set or dsp’. If you have come from the lovely Sandra Herzog I am sure you loved her project. You are currently visiting Mo Rootes from near Cambridge in the Uk. I hope you like what I am sharing today.

I don’t know about you but I love a set that can be used for more than one sort of occasion and as soon as I saw the Cup of Christmas stamp set in the Autumn/Winter catalogue I knew it would make a fantastic anniversary card.

To Recreate the Cup of…..Anniversary card you will need:

So Saffron card base – 8¼” by 5⅞” scored at 4⅛” – rounded upper left corner
Bermuda Bay cardstock – 5½” by 3¾” – rounded upper left corner
Whisper White – 5⅜” by 3⅝” x 2 – rounded upper left corner
Scrap Whisper White cardstock

I began by stamping the 2 cups, one in Flirty Flamingo ink and the other in Bermuda Bay ink onto scrap Whisper White cardstock and die cut them out using the co-ordinating Cup of Cheer dies.

I placed them on one of the Whisper White panels for placement and added a Pearlised Doily.

www.crafty-rootes.com – A pretty anniversary card made using the Cup of Christmas stamp set

At this point I wasn’t happy, I knew the card needed something else but I couldn’t decide what!!! Don’t you hate when that happens…….. I tried a couple of embossing folders but felt they over-powered the cups. I tried a coloured circle instead of the doily…….wasn’t happy with that either.

www.crafty-rootes.com – A pretty anniversary card made using the Cup of Christmas stamp set

At this point I reached across my desk for my catalogue, seeking inspiration and accidently pulled out the pack of Basic Pattern Decorative Masks along with the catalogue. Light bulb moment right there!

I used a Sponge Dauber and So Saffron ink to colour through the mask and it was perfect, just what I was looking for.

www.crafty-rootes.com – A pretty anniversary card made using the Cup of Christmas stamp set

The sponged panel was mounted onto the Bermuda Bay layer with Multipurpose Liquid Adhesive. To add a bit more texture to the card front I added some of the gorgeous Polka Dot Tuille Ribbon and tucked the Pearlised Doily underneath. The panel was then added to the So Saffron card base with the same adhesive.

www.crafty-rootes.com – A pretty anniversary card made using the Cup of Christmas stamp set

The sentiment from the Beautiful Bouquet stamp set was stamped in Bermuda Bay ink and the cups placed on top of the doily, the striped cup with the same liquid glue and the spotty cup on Dimensionals. I added a Polka Dot Tuille bow and a trio of Iridescent Sequins to complete the card front.

www.crafty-rootes.com – A pretty anniversary card made using the Cup of Christmas stamp set

I stamped the striped cup on the remaining Whisper White panel and adhered it to the inside. The same image was stamped on the front of the envelope.

I do hope you like my card. Please continue on to see what Narelle Fasulo has to share with us.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A sweet card for a baby girl made using the Little Elephant stamp set and Elephant Builder Punch by Stampin' Up!

Little Elephant Baby card for the Stamper’s Showcase Blog Hop

Posted on August 25, 2019August 5, 2019 by Mo Rootes

Hello and welcome to the August Stamper’s Showcase Blog Hop. This month we are focusing on Babies and Children and I have such a sweet card to share with you. I made this for friends who have recently had a sweet baby girl who they have named Phoebe. I chose to use the Little Elephant stamp set and the co-ordinating Elephant Builder Punch to make my card.

To recreate the Little Elephant card you will need;

Smokey Slate card base 8¼” by 5⅞” scored at 4⅛”
Rococo Rose 5 ½” by 3 ¾”
Whisper White 5⅜” by 3⅝” x 2
Smoky Slate 4 ¼” by 3”
Whisper White 4 ¼” by 3”
Scrap Rococo Rose and Whisper White

I really wanted to use the gorgeous Stitched lace die on this card. I die cut it from one of the Whisper White cardstock panels and used the new die brush attachment for the Take Your Pick Tool to get all the little pieces out. I added this large die cut piece to the Rococo Rose panel using Multipurpose Liquid Adhesive. I placed the die cut piece face down on my silicone mat and applied the glue with a piece of sponge.

www.crafty-rootes.com -The Little Elephant stamp set and the Elephant Builder Punch used for the Stamper’s Showcase Blog Hop

I wrapped a length of Silver Edged White Ribbon around the panel and adhered it on the back with Sellotape. The panel was then added to a Smoky Slate card base with Multipurpose Liquid Adhesive.

www.crafty-rootes.com -The Little Elephant stamp set and the Elephant Builder Punch used for the Stamper’s Showcase Blog Hop

I stamped the sweet little elephants on scrap Whisper White in Rococo Rose ink, the full strength ink was too dark so I stamped off first to get a lighter shade. I stamped the elephants again in Smoky Slate ink and punched out the 2 pink ones and the ears from the grey ones using the Elephant Builder Punch. I added the ears to each elephant on a dimensional.

www.crafty-rootes.com -The Little Elephant stamp set and the Elephant Builder Punch used for the Stamper’s Showcase Blog Hop

I die cut a stitched oval from the small Whisper White layer using the Stitched Shapes dies. I inked up the strip of plaid image from the same stamp set using Smoky Slate ink, stamped off twice then stamped onto the bottom of the die cut oval. I added leaves from the Dino Days stamp set in 1^st and 2^nd generation Smoky Slate ink.

www.crafty-rootes.com -The Little Elephant stamp set and the Elephant Builder Punch used for the Stamper’s Showcase Blog Hop

The elephants were glued to the die cut oval with the Multipurpose glue and added to a Scalloped Oval which was die cut from the Smoky Slate piece. The oval was added to the card front on Dimensionals.

I added a bow to the side of the oval with a Mini Glue Dot. The sentiment from the Little Elephant was stamped in Smoky Slate and Rococo Rose ink onto scrap Whisper White and backed with a scrap of Rococo Rose cardstock and glued to the card front.

www.crafty-rootes.com -The Little Elephant stamp set and the Elephant Builder Punch used for the Stamper’s Showcase Blog Hop

I stamped the strip of plaid onto the remaining Whisper White panel and adhered it to the inside of the card. The same image was stamped on the envelope.

Such a pretty card. I really hope you like it.

Please hop on to see what the lovely Teresa has to share with us today.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Above the Clouds Hot Air Balloon card for a Stamp'N Hop blog hop colour challenge

Above the Clouds for the Stamp ‘N Hop colour challenge

Posted on August 10, 2019August 3, 2019 by Mo Rootes

Welcome to the August Stamp ‘N Hop Blog Hop where this month we have a colour challenge. The colours we have been given are Granny Apple Green, Blueberry Bushel, Lovely Lipstick and Silver, all great colours. If you have hopped over from the lovely Libby I am sure you have been inspired by her project.

To recreate the Above the Clouds card you will need;

Granny Apple Green card base 8¼” by 5⅞” scored at 4⅛” – rounded upper right corner
Silver Foil 5½” by 3¾” – rounded upper right corner
Whisper White 5⅜” by 3⅝” – rounded upper right corner
Scrap Whisper White cardstock

I choose to use the Above the Clouds stamp set for this card and stamped 3 balloons in Memento Tuxedo Black ink onto a scrap piece of Whisper White cardstock. I stamped the solid fill in balloon image over the top – one in Lovely Lipstick ink , one in Blueberry Bushel ink and the last in Granny Apple Green ink. I stamped the top of the balloons inall three colours on the scrap Whisper White.

www.crafty-rootes.com -Above the Clouds stap set used for the Stamp ‘N Hop blog hop colour challenge

The balloons and the tops of the ballons were then punched out using the co-ordinating Hot Air Balloon Punch. I then cut away the top part of the partial balloons, mixed up the colours glued the pieces together with Dimensionals.

www.crafty-rootes.com -Above the Clouds stap set used for the Stamp ‘N Hop blog hop colour challenge

I punched 3 ‘baskets’ from the Silver Foil layer taking care to stay away from the edge. The baskets were attached to the bottom of each balloon using Multipurpose Liquid Adhesive.

www.crafty-rootes.com -Above the Clouds stap set used for the Stamp ‘N Hop blog hop colour challenge

The clouds were inked up with Blueberry Bushel ink, stamped off x 2 onto the Grip Paper then stamped randomly onto one of the Whisper White panels.

www.crafty-rootes.com -Above the Clouds stap set used for the Stamp ‘N Hop blog hop colour challenge

The balloons were added on to to the cloud stamped layer with the Multipurpose Liquid Adhesive. The whole topper was the glued to the Silver Foil piece.

After rubbing a piece of scrap Blueberry Bushel cardstock with my embossing buddy I stamped the sentiment in Versamark ink, covered the ink with Silver Embossing Powder and set it using my Heat Tool. I flagged the end with scissors and added it to the card front.

www.crafty-rootes.com -Above the Clouds stap set used for the Stamp ‘N Hop blog hop colour challenge

The clouds were stamped again on the remaining Whisper White panel and added to the inside of the card and the front of the envelope.

I am really happy with the card, I hope you also like it.

Please hop on the see what the talented Rebecca-Jo has to share with us this month.

Details of the products I used for this project can be found below.

Mo x

Supplies

Lovely sailing themed masculine card using Stampin Up product.

Sailing Home for the Stampers Showcase Blog Hop

Posted on July 29, 2019July 29, 2019 by Mo Rootes

Thank you for joining me for the Stampers Showcase Blog Hop where our theme this month is ‘Masculine cards’. If you have joined me from the lovely …….. welcome, my name is Mo Rootes and I live near Cambridge in the UK. Like many others I find making cards for the men in my life a bit of a challenge and I am really looking forward to seeing what my fellow blog hoppers have to share with us.

To recreate the Sailing Home card you will need;

Seaside Spray card base 8¼” by 5⅞” scored and folded at 4⅛”
Seaside Spray cardstock 5½” by 3¾”
Whisper White cardstock 5½” by 3¾” – for the inside
Whisper White cardstock 5” by 3”
Night of Navy cardstock 3½” by ½” x 2
Scrap Whisper White

I ran the panel of Seaside Spray cardstock through my Big Shot with the Subtles Embossing folder to give it a little texture before adhering the panel to Seaside Spray card base using Multipurpose Liquid Adhesive.

www.crafty-rootes.com – Sailing Home stamp set and Smooth Sailing dies makes a masculine card for the Stampers Showcase Blog Hop

I cut a label using the Stitched Nested Label dies and stamped the sentiment in Night of Navy towards the bottom. The smaller boat was then stamped twice in the Night of Navy ink.

www.crafty-rootes.com – Sailing Home stamp set and Smooth Sailing dies makes a masculine card for the Stampers Showcase Blog Hop

The larger boat was stamped in the same ink onto scrap Whisper White cardstock and die cut using the Smooth Sailing dies and coloured using the Seaside Spray combo, light Balmy Blue & light Night of Navy Blends Markers.

www.crafty-rootes.com – Sailing Home stamp set and Smooth Sailing dies makes a masculine card for the Stampers Showcase Blog Hop

Using the 1” Circle Punch I punched circle from a PostIt Note and stuck it to the top of the stitched label. I sponged on some Blamy Blue ink using a Sponge Dauber then removed the punched circle and added some So Saffron ink again using a Sponge Dauber.

www.crafty-rootes.com – Sailing Home stamp set and Smooth Sailing dies makes a masculine card for the Stampers Showcase Blog Hop

I added the 2 strips of Night of Navy cardstock to the card front having flagged the ends. The Stitched Label was then added over the top using Multipurpose Liquid Adhesive and the lager boat added on Dimensionals.

www.crafty-rootes.com – Sailing Home stamp set and Smooth Sailing dies makes a masculine card for the Stampers Showcase Blog Hop

I stamped the larger boat in Night of Navy ink onto the Whisper White panel and added it to the inside of the card. The same image was stamped onto the front of the envelope.

Please continue to hop on and see what the lovely Deb Naylor has to share with us.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A get well card made using the Healing Hugs stamp set for the Stamp 'N Hop blog hop

Healing Hugs for the Stamp ‘n Hop Blog Hop

Posted on July 13, 2019July 8, 2019 by Mo Rootes

Welcome to the July Stamp ‘n Hop Blog Hop where the theme is ‘Casing the Annual Catalogue’. If you have hopped over from the lovely Linda or started the blog hop with me – Mo Rootes …..welcome and enjoy the hop.

I have chosen to CASE a card on page 80 of the Annual Catalogue using the Healing Hugs stamp set. I have changed the colours but kept the design pretty much as it is.

To recreate the Healing Hugs card you will need;

Seaside Spray card base 5⅞” by 8¼” scored at 4⅛”
Whisper White cardstock – 5⅜” by 3⅝” x 2
Seaside Spray 3” by 1¼”
Scrap Whisper White cardstock

www,crafty-rootes.com – Healing Hugs stamp set used for the Stamp ‘n Hop blog hop

Using the gorgeous new Stitched Lace dies I ran one of the Whisper White panels through the Big Shot. I used some Multipurpose Liquid Adhesive to adhere the die cut piece to the Seaside Spray card base.

www,crafty-rootes.com – Healing Hugs stamp set used for the Stamp ‘n Hop blog hop

I stamped the flowers in Rococo Rose ink and So Saffron ink onto scrap Whisper White cardstock and cut them out using my scissors. I also stamped the two different sets of leaves from the stamp set in Mossy Meadow ink and hand cut them out.

www,crafty-rootes.com – Healing Hugs stamp set used for the Stamp ‘n Hop blog hop

Using Multipurpose Liquid Adhesive and Dimensionals I added the flowers and leaves to the card front.

www,crafty-rootes.com – Healing Hugs stamp set used for the Stamp ‘n Hop blog hop

The sentiment from the same stamp set was stamped in Mossy Meadow ink onto the small piece of Seaside Spray cardstock and added to the card front on dimensionals.

www,crafty-rootes.com – Healing Hugs stamp set used for the Stamp ‘n Hop blog hop

Such a pretty card and I like it in the softer colours. I hope you like it. Please hop on to see what Anastasia has to share with us.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A gorgeous robin Christmas card made using the Free as a Bird stamp set by Stampin' Up!

Robins for the Stamp ‘N Hop Blog Hop

Posted on June 7, 2019June 8, 2019 by Mo Rootes

Today I am hopping along with the fabulous Stamp ‘n Hop blog hoppers. If you have hopped over from the lovely Laura or started the blog hop with me…..welcome and enjoy the hop. Our theme this month is ‘Hello to the new catalogue’.

I knew exactly which stamp set I wanted to use as I fell in love with the sweet row of birds from the new Free As A Bird stamp set, I couldn’t wait to see if I could make them look like robins, we Brits love a robin. So I have made my first Christmas card of the year……. I know…….sorry……

To recreate the Robin card you will need;

Mossy Meadow card base – 8¼” by 5⅞” scored and folded at 4⅛” – rounded upper right corner
Terracotta Tile cardstock – 5½” by 3¾” – rounded upper right corner
Mosiac Mood dsp 5⅜” by 3⅝” – rounded upper right corner
Whisper White cardstock 5⅜” by 3⅝” – rounded upper right corner – for the inside
Whisper White cardstock 4½” by 3” for die cutting

I stamped the sweet row of birds onto the smallest piece of Whisper White cardstock and die cut it out using the new Stitched Nested Dies. I trimmed down the left side of the die cut piece.

www.crafty-rootes.com – Free as a bird stamp set makes for a fab Christmas card

The sentiment form the Itty Bitty Greetings stamp set was stamped in Mossy Meadow at the bottom of the panel on the right hand side.

www.crafty-rootes.com – Free as a bird stamp set makes for a fab Christmas card

I coloured in the image using the following Blends Markers – Crumb Cake combo, Mossy Meadow combo, Calypso Coral combo, dark Soft Suede and the Color Lifter.

www.crafty-rootes.com – Free as a bird stamp set makes for a fab Christmas card

The piece of Mosiac Moods dsp was glued to the Terracotta Tile and then to the Mossy Meadow card base.

www.crafty-rootes.com – Free as a bird stamp set makes for a fab Christmas card

The coloured and die cut panel was adhered to the dspe panel with Dimensionals and a piece of the Magnolia Lane ribbon was wrapped around the panel and stuck to the back with Sellotape.

www.crafty-rootes.com – Free as a bird stamp set makes for a fab Christmas card

I added a bow using the Magnolia Lane Twine and a trio of Happiness Blooms Enamel Dots. The birds were stamped on the inside panel and the front of the envelope to complete the card.

I love how this card turned out, it is adorable. I hope you like it.

Please hop on to see what my friend Susan has to share with us this month and continue to hop on around for lots of ideas and inspiration.

Pia Gerhardt (DE)
Laura Mackie (UK)
Mo Rootes (UK) – you are here
Susan Simpson (UK)
Narelle Fasulo
Stacey Marsh (UK)
Vicky Wright (AUS)
Laura Hill (UK)
Tracy Marie Lewis (US)
Annette Ball
Linda Handford (UK)
Anastastia Radloff (US)
Michelle Bryant (UK)
Karen Varley
Jo Blackman
Jacqui Lawrence
Sharon Dalton
Sue Allen (AUS)
Jenn Charles
Vickie Kello (AUS)

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A lovely Spring wreath card made using the Bitty Blooms Punch pack set from Stampin' Up!

Goodbye to the Bitty Blooms Punch Pack – Stamp ‘n Hop Blog Hop

Posted on May 11, 2019May 8, 2019 by Mo Rootes

Welcome to the Stamp ‘n Hop Blog Hop where our theme this month is ‘goodbye to the 2018 – 2019 catalogue’. If you have joined me from the talented Laura Mackie’s blog, welcome, I am sure you loved her project. I had real difficulty with this theme as there are so many lovely things retiring that it was hard to make a choice. Eventually I went with the lovely little Bitty Blooms Punch Pack. I was delighted to see them in the Spring/Summer catalogue as I have really missed tiny flowers and I am gutted to see them going so soon. I have also used a lot of other retiring products to make this card; in fact I think the only thing I have used that is carrying over, other than the cardstock is the Sprig Punch.

To recreate the Bitty Blooms card you will need;

Flirty Flamingo card base – 8¼” by 5⅞” scored and folded at 4⅛”
Early Espresso cardstock 5 ½” by 3 ¾”
Whisper White cardstock 5⅜” by 3⅝” x 3 – 1 for the inside, 1 for the outside
Scrap Daffodil Delight, Flirty Flamingo, Highland Heather, Mango Melody, Pear Pizzazz and Basic Gray
Scrap Wood Textures dsp – Retiring

www.crafty-rootes.com – The retiring Bitty Blooms Punch Pack used to make a sweet card for the Stamp ‘n Hop Blog Hop

I used the retiring Swirly Scribbles dies and the Big Shot to die cut the open swirly circle from the Wood Textures designer series paper. I cut three circles and glued them together with Multipurpose Liquid Adhesive to give a bit of dimension. The piece was then added to one of the Whisper White layers using the same glue.

www.crafty-rootes.com – The retiring Bitty Blooms Punch Pack used to make a sweet card for the Stamp ‘n Hop Blog Hop

I stamped the image from the Beach Happy stamp set in Early Espresso ink.

www.crafty-rootes.com – The retiring Bitty Blooms Punch Pack used to make a sweet card for the Stamp ‘n Hop Blog Hop

Using all of the Bitty Blooms Punches and the scrap coloured cardstock I punched out a selection of flowers, leaves and flower centres. I also used the Sprig Punch to get some groups of leaves. I added a little dimension to each flower by curling the petals with my Bone Folder.

www.crafty-rootes.com – The retiring Bitty Blooms Punch Pack used to make a sweet card for the Stamp ‘n Hop Blog Hop

Mini Glue dots were used to make up the flowers and to attach the leaves and they were then added to the scribbled circle with Mini Glue Dots. The Glue dots give just that little bit of dimension without raising the little flowers up too high.

www.crafty-rootes.com – The retiring Bitty Blooms Punch Pack used to make a sweet card for the Stamp ‘n Hop Blog Hop

The inside panel was stamped with some of the small flowers from the co-ordinating Bloom by Bloom stamp set in Mango Melody, Flirty Flamingo and Highland Heather inks. The same colours and images were used to decorate the front of the envelope. I added a trio of Glitter Enamel Dots to complete the card. I love the Spring colour palette of this card. I hope you like it.

Please hop on to see what my friend Susan Simpson has to share with us today.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The Baby Wipe Technique used with the Beautiful Promenade stamp set for the Stampers Showcase Blog Hop

Baby Wipe Technique for the Stamper’s Showcase Blog Hop

Posted on April 28, 2019April 27, 2019 by Mo Rootes

Welcome to the April Stampers Showcase blog hop where our theme this month is Spring/Floral. If you have joined me from Mikaela‘s blog then welcome. I have chosen to use the Baby Wipe Technique with the Beautiful Promenade stamp set and some bright, rich colours.

To recreate the Beautiful Promenade card you will need;

Poppy Parade card base 8 ¼” by 5⅞” – scored and folded at 4⅛” – rounded upper left corner
Gorgeous Grape cardstock 5½” by 3 ¾”
Very Vanilla cardstock 5⅜” by 3⅝”
Vellum 6” by 1½”
Scrap Gorgeous Grape cardstock for die-cutting
C6 Very Vanilla Envelope

www.crafty-rootes.com – Beautiful Promenade stamp set used with the Baby Wipe Technique for the April Stampers Showcase Blog Hop

I have hardly used this gorgeous stamp set, I am so glad it is carrying over to the new Annual Catalogue. I wanted to try out the baby wipe technique and thought this set might work well with the technique.

Poppy Parade card base 8 ¼” by 5⅞” – scored and folded at 4⅛” – rounded upper left corner Gorgeous Grape cardstock 5½” by 3 ¾” Very Vanilla cardstock 5⅜” by 3⅝” Vellum 6” by 1½” Scrap Gorgeous Grape cardstock for die-cutting

www.crafty-rootes.com – Beautiful Promenade stamp set used with the Baby Wipe Technique for the April Stampers Showcase Blog Hop

I began by folding a single baby wipe into a square and placing it in an empty clear mount stamp case. I took the Daffodil Delight re-inker and dropped about 12 – 15 drops randomly onto the baby wipe. I repeated this with the Poppy Parade re-inker and finally with Gorgeous Grape re-inker. The dots of ink should spread and merge together with no un-inked areas

www.crafty-rootes.com – Beautiful Promenade stamp set used with the Baby Wipe Technique for the April Stampers Showcase Blog Hop

I inked the outline flower stamp on my hand made ink pad and randomly stamped the image onto the Very Vanilla panel. I loved the effect of the multicolour flowers. The stamped layer was then added to the Gorgeous Grape panel with Multipurpose Liquid Adhesive.

www.crafty-rootes.com – Beautiful Promenade stamp set used with the Baby Wipe Technique for the April Stampers Showcase Blog Hop

I wrapped the strip of Vellum around the stamped panel and adhered it on the back with Sellotape. The whole piece was then glued to the Poppy Parade card front.

I die cut the word ‘birthday’ 3 times from scrap Gorgeous Grape cardstock and adhered the words one on top of the other using Multipurpose liquid Adhesive, this gives great dimension to the word.

www.crafty-rootes.com – Beautiful Promenade stamp set used with the Baby Wipe Technique for the April Stampers Showcase Blog Hop

I swiped the Embossing Buddy over the vellum then stamped the word ‘wishes’ in Poppy Parade ink covered it with Clear Embossing Powder and heat set it with my Heat Tool. The die cut ‘birthday’ was added on top with the Multipurpose Liquid Adhesive. I used a Mini Glue Dot tucked under the ‘birthday’ to hold the vellum layer down.

I love, love this card, hoping you like it as well.

Please hop on to see what Annette has to share with us.

Details of the products I used for this project can be found below.

Mo x