A lovely Christmas card made using the Curvy Christmas and Perfectly Plaid stamp sets by Stampin' Up!

Curvy Plaid Christmas card

Posted on December 20, 2020December 13, 2020 by Mo Rootes

Hi, today I am sharing a sweet Christmas curvy plaid card using the Curvy Christmas and Perfectly Plaid stamp set.

To recreate the Curvy Plaid card, you will need:

Cherry Cobbler card base – 8¼” by 5⅞” scored at 4⅛” – Rounded upper right corner
Garden Green – 5½” by 3¾” – Rounded upper right corner
Whisper White – 5⅜” by 3⅝” – Rounded upper right corner x 2
Classic Christmas dsp – 5⅜” by 3⅝”
Scrap Whisper White

I began by adhering one of the Whisper White panels to the Garden Green layer using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk -A pretty curvy plaid Christmas card made using the Curvy Christmas and Perfectly Plaid stamp sets

Using the Stampin’ Cut & Emboss Machine and the Curvy Dies I cut the decorative edge into the Classic Christmas dsp. This was then glued to the Whisper White/ Garden Green layer.

www.crafty-rootes.co.uk -A pretty curvy plaid Christmas card made using the Curvy Christmas and Perfectly Plaid stamp sets

I stamped the sentiment in Basic Gray ink above the decorative edge. I love the font of this sentiment.

www.crafty-rootes.co.uk -A pretty curvy plaid Christmas card made using the Curvy Christmas and Perfectly Plaid stamp sets

I wrapped a piece of Metallic Edged Ribbon around the panel and used Sellotape to secure it on the back. The panel was then added with the liquid adhesive to the Cherry Cobbler card front.

www.crafty-rootes.co.uk -A pretty curvy plaid Christmas card made using the Curvy Christmas and Perfectly Plaid stamp sets

The plaid tree from the Perfectly Plaid stamp set was stamped on scrap Whisper White card with Garden Green ink, one full strength and the other in 2^nd generation in. Using the Pine Tree Punch I punched out both trees and added them to the card front, one with liquid glue and the other on Dimensionals.

www.crafty-rootes.co.uk -A pretty curvy plaid Christmas card made using the Curvy Christmas and Perfectly Plaid stamp sets

I added a bow using the same ribbon and a trio of Silver Metallic Pearls to complete the card.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

GDPR

Thanks for visiting my blog today, I love to read what you think of my projects so please do let me know. In line with new Data Protection Legislation (GDPR), by commenting you do so in the knowledge that your name & comment are visible to all who visit this blog and you thereby consent to the use of that personal information for that specific purpose. Please stop by again soon.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty aptmospheric Christmas card made using the In the Pines stamp set by Stampin' Up!

Misty Trees

Posted on December 15, 2020December 11, 2020 by Mo Rootes

Today I am sharing a pretty Christmas card featuring misty trees made using the In The Pines stamp set and Pine Woods Dies.

To recreate the misty trees card, you will need:

Misty Moonlight card base – 8¼” by 5⅞” scored at 4⅛” – Rounded Upper Left corner
Silver Foil -4½” by 3½” – Rounded Upper Left corner
Shaded Spruce – 4¼” by 3¼” – Rounded Upper Left corner
Whisper White – 4” by 3” – Rounded Upper Left corner
Whisper White – 5⅜” by 3⅝” – Rounded Upper Left corner – for the inside
Soft Sea Foam & Whisper White

I stamped the row of trees across the smaller Whisper White panel in Misty Moonlight ink. I used first and second generation in, i.e. full strength and stamped off once. I added the ‘ground’ image in the same ink. Using a wedge of Sponge, I lightly added Misty Moonlight ink over the panel to suggest a misty day.

www.crafty-rootes.co.uk -A Christmas card made using the In The Pines stamp set and featuring a row of misty trees

My Stampin’ Cut & Emboss Machine was used to die cut 3 of the tall trees. The Soft Sea Foam tree was cut from scrap card. The Shaded Spruce and Silver Foil trees were cut from the middle of the 2 layering pieces – no-one will ever know……

www.crafty-rootes.co.uk -A Christmas card made using the In The Pines sta

The stamped layer was then added to the Shaded Spruce layer using Multipurpose Liquid Adhesive and then added to the Silver Foil layer on Dimensionals.

www.crafty-rootes.co.uk -A Christmas card made using the In The Pines stamp set and featuring a row of misty trees

Using the snow image and Misty Moonlight ink I stamped around the edge of the Misty Moonlight card base before adding the topper piece to the card front with the liquid glue.

www.crafty-rootes.co.uk -A Christmas card made using the In The Pines stamp set and featuring a row of misty trees

The 3 die cut trees were then added with liquid adhesive to the card front. The sentiment was stamped onto scrap Whisper White card and trimmed out with scissors before being added to the card front on Dimensionals.

www.crafty-rootes.co.uk -A Christmas card made using the In The Pines stamp set and featuring a row of misty trees

I added a trio of pretty Silver Pearls to complete the card. I hope you like it

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty Christmas bauble themed Christmas card made using Stampin' Up! products

Gleaming Baubles

Posted on December 11, 2020December 8, 2020 by Mo Rootes

It’s that time again you are joining me for the December Stamp ‘n Hop Blog Hop where our theme is ‘Christmas’. I love a bit of Christmas crafting and have made a gleaming baubles card using the Christmas Gleaming stamp set. If you have hopped over from the lovely Cheryl Taylor, welcome. If you are starting with me you are also very welcome.

To recreate the Gleaming Baubles card you will need:

Seaside Spray card base – 8¼” by 5⅞” scored at 4⅛” – Rounded upper left corner

Pretty Peacock – 5 ½” by 3 ¾” – Rounded Brightly Gleaming Stamp set.upper left corner

Whisper White – 5⅜” by 3⅝” – Rounded upper left corner x 2
Scrap Whisper White and Just Jade.

Using a Sponge Dauber I added Frost White Shimmer Paint to one of the baubles from the Christmas Gleaming stamp set and stamped it onto one of the Whisper White panels. I repeated this step, randomly stamping the image over the Whisper White panel. This gives such a subtle background with a soft shimmer. The stamped panel was then added to the Pretty Peacock layer with Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – A lovely Christmas card showing 2 gleaming baubles and made using the Christmas Baubles stamp set

The whole panel was added to the Seaside Spray card base using the same adhesive.

www.crafty-rootes.co.uk – A lovely Christmas card showing 2 gleaming baubles and made using the Christmas Baubles stamp set

I stamped the same bauble in Seaside Spray ink onto scrap Whisper White and again in Pretty Peacock ink and punched both baubles out using the Ornament Punch.

www.crafty-rootes.co.uk – A lovely Christmas card showing 2 gleaming baubles and made using the Christmas Baubles stamp set

The leaves from All Things Fabulous stamp set were stamped in Just Jade ink on Just Jade card. They were then die cut using the Fabulous Florals Dies and the Cut & Emboss Machine.

www.crafty-rootes.co.uk – A lovely Christmas card showing 2 gleaming baubles and made using the Christmas Baubles stamp set

The Seaside Spray bauble was added to the card front with liquid glue and the die cut leaves tucked in behind using the same glue. The Pretty Peacock bauble was added on Dimensionals.

www.crafty-rootes.co.uk – A lovely Christmas card showing 2 gleaming baubles and made using the Christmas Baubles stamp set

The sentiment from the Christmas Gleaming stamp set was stamped in Just Jade ink and cut out using my sharp scissors before being added to the card front. I added a trio of 2020 – 2022 In Color Enamel Dots to complete the card.

www.crafty-rootes.co.uk – A lovely Christmas card showing 2 gleaming baubles and made using the Christmas Baubles stamp set

So pretty, I hope you like it.

Please hop on to see what Christmas inspiration Jo Blackman has to share with us today

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A Christmas card featuring a row of presents and made using the Most Wonderful Time Product Medley by Stampin' Up!

Wonderful Presents

Posted on December 8, 2020December 5, 2020 by Mo Rootes

Here is a sweet Christmas card featuring a row of wonderful presents, made using the Most Wonderful Time product medley.

To recreate the Wonderful Presents card, you will need:

Thick Whisper White – 8¼” by 5⅞” scored at 4⅛”
Real Red – 5⅜” by 3⅝”
Most Wonderful Time dsp – 5¼” by 3½”
Old Olive – 4¼” by 2¼”
Whisper White – 4¼” by 2¼”
Whisper White ⅜” strip

I began by adhering the Most Wonderful Time dsp to the Real Red panel using Multipurpose Liquid Adhesive. I set this panel to the side.

www.crafty-rootes.co.uk – A pretty Christmas pressies card made using the Most Wonderful Time product Medley

Taking the ‘ribbon image’ from the Most Wonderful Time stamp set I stamped them in Real Red ink onto the panel of Whisper White. After trial and error, I found it easier to stamp the ribbons first, followed by the parcels. The parcels were then stamped in Old Olive ink.

www.crafty-rootes.co.uk – A pretty Christmas pressies card made using the Most Wonderful Time product Medley

I die cut the stamped row of presents using my Stampin’ Cut & Emboss Machine and one of the Tasteful Labels dies. Using the same label die I cut the same shape from the piece of Old Olive card. This was cut through the middle and was glued to the stamped label using the liquid glue.

www.crafty-rootes.co.uk – A pretty Christmas pressies card made using the Most Wonderful Time product Medley

The ribbon holes at either end were punched using the Detailed Trio Punch and a piece of the All The Trimmings ribbon fed through. I added the stamped panel to the Real Red layer using Dimensionals and wrapped the ribbon around the back of the panel, tying it on the front into a bow.

www.crafty-rootes.co.uk – A pretty Christmas pressies card made using the Most Wonderful Time product Medley

The whole panel was then mounted onto the Thick Whisper White card base using the same liquid glue. The sentiment from the In The Pines stamp set was stamped in Old Olive ink onto the ⅜” strip and trimmed it out using Scissors. It was added to the card front using the liquid glue.

www.crafty-rootes.co.uk – A pretty Christmas pressies card made using the Most Wonderful Time product Medley

I added a Red Rhinestone to the bow of each present to complete the card.

I made the same card but changed it to a portrait version and using a different piece of dsp and an Old Olive card base.

www.crafty-rootes.co.uk – A pretty Christmas pressies card made using the Most Wonderful Time product Medley

I hope you like them, let me know which you prefer..

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Christmas Tree Bauble card

Posted on December 4, 2020November 30, 2020 by Mo Rootes

I am CASEing my own card today – see blog post on the 29^th September, using the In the Pines stamp set to make a sweet Christmas Tree Bauble

To recreate the Christmas Tree Bauble card. you will need:

Pool Party card – 8¼” by 5⅞” scored at 4⅛” – Rounded Lower Right corner
Shaded Spruce – 5 ½” by 3 ¾” – Rounded Lower Right corner
Whisper White – 5⅝” by 3⅞” – – Rounded Lower Right corner x 2

Using an Early Espresso Marker I coloured in the top of one of the baubles from the Christmas Gleaming stamp set and stamped it towards the top of the panel of Whisper White.

A pretty Christmas Tree Bauble card made using the In The Pines Stamp Set by Stampin' Up!

www.crafty-rootes.co.uk – A pretty Christmas card featuring a Christmas Tree Bauble and made using the In The Pines Stamp Set

I die cut a circle from copy paper measuring about 6 by 4 ½” – using the Layering Circle dies and used the negative space to act as a mask. Using sponges I added Pool Party ink all over the circle then Bermuda Bay around the edge.

www.crafty-rootes.co.uk – A pretty Christmas card featuring a Christmas Tree Bauble and made using the In The Pines Stamp Set

I stamped the small row of trees across the bauble in Early Espresso ink and added the in-fill in Shaded Spruce ink.

I added the ‘ground’ image under the trees in Pool Party ink and randomly stamped the snowflakes in the same ink before removing the copy paper to reveal the inked and decorated circle.

www.crafty-rootes.co.uk – A pretty Christmas card featuring a Christmas Tree Bauble and made using the In The Pines Stamp Set

The sentiment was stamped below the bauble o using Shaded Spruce ink and I added the ‘string’ using a Early Espresso Marker.

www.crafty-rootes.co.uk – A pretty Christmas card featuring a Christmas Tree Bauble and made using the In The Pines Stamp Set

The stamped panel was added to the Shaded Spruce layer using Multipurpose Liquid Adhesive. The panel was added to the Pool Party card base on Dimensionals and a trio of Adhesive Backed Snowflakes were added to complete the card.

www.crafty-rootes.co.uk – A pretty Christmas card featuring a Christmas Tree Bauble and made using the In The Pines Stamp Set

I love it!

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty snowflake Christmas card in non traditional colours using the Snowflake Wishes stamp set by Stampin' Up!

Snowflake Wishes for the Stampers Showcase Blog Hop

Posted on November 30, 2020November 24, 2020 by Mo Rootes

Welcome to the Stampers Showcase blog hop where our theme this month is Winter/Holidays. If you joined me from the lovely Rochelle Laird-Smith from Australia you are very welcome. You are currently visiting Mo Rootes in the UK.

I don’t know about you but I love Christmas crafting and had a hard job deciding on a stamp set to use. Eventually I settled on the gorgeous Snowflake Wishes stamp set.

To recreate the Snowflakes Wishes card you will need:

Thick Whisper White card base – 8¼” by 5⅞” scored at 4⅛” – Rounded upper right corner
Whisper White – 5⅜” by 3⅝” – Rounded upper right corner

I used a one of the fantastic new blending brushes to apply Seaside Spray ink to the Whisper White panel for some background interest. These blending brushes will be available from the 5th January 2021 in our January to June 2021 mini catalogue.

www.crafty-rootes.co.uk -The Snowflake Wishes stamp set used for a gorgeous Christmas card for the Stampers Showcase Blog Hop

The largest snowflake was stamped using the same Seaside Spray ink.

www.crafty-rootes.co.uk -The Snowflake Wishes stamp set used for a gorgeous Christmas card for the Stampers Showcase Blog Hop

The middle-sized snowflake was stamped in Highland Heather ink and the small snowflake was stamped in Magenta Madness ink……… don’t you just love the pop of hot pink.

www.crafty-rootes.co.uk -The Snowflake Wishes stamp set used for a gorgeous Christmas card for the Stampers Showcase Blog Hop

I stamped the teeny, tiny snowflakes in Seaside Spray. The sentiment from the Snowflake Wishes stamp set was stamped in Seaside Spray ink.

www.crafty-rootes.co.uk -The Snowflake Wishes stamp set used for a gorgeous Christmas card for the Stampers Showcase Blog Hop

The stamped layer was added to the Thick Whisper White card front with Dimensionals.

To complete the card, I added a scattering of Snowflake Sequins.

Isn’t it pretty?

Please continue to hop on to see what the lovely Rochelle Laird-Smith has to share with us today.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The Coming Home stamp set by Stampin' Up! used to make a Christmas cards featuring a row of trees

Row of Christmas Trees

Posted on November 17, 2020November 12, 2020 by Mo Rootes

This Christmas card features a beautiful row of Christmas Trees made using the Coming Home stamp set.

To recreate the Row of Christmas Trees card you will need:

Shaded Spruce card base –- 8¼” by 5⅞” scored at 4⅛”
Whisper White – 5⅞” by 2¼”
Real Red – 5⅞” by 1”
Whisper White – 5⅜” by 3⅝”
Scrap Whisper White

I stamped the large Christmas tree from the Coming Home stamp set across the strip of Whisper White card using Early Espresso ink.

www.crafty-rootes.co.uk -A row of trees Christmas card made using the Coming Home stamp set by Stampin’ Up!

The trees were coloured in using the following Blends Markers – Shaded Spruce, Soft Suede and Crumb Cake.

www.crafty-rootes.co.uk -A row of trees Christmas card made using the Coming Home stamp set by Stampin’ Up!

A decorative scalloped border was cut from the strip of Real Red card using the Peony Dies. This was then adhered to the bottom of the stamped strip using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk -A row of trees Christmas card made using the Coming Home stamp set by Stampin’ Up!

I stamped the tiny wreath image from the Coming Home stamp set in Shaded Spruce ink randomly across the bottom half of the Shaded Spruce card front to give some tone on tone texture and added the stamped panel over-top using the same liquid glue.

www.crafty-rootes.co.uk -A row of trees Christmas card made using the Coming Home stamp set by Stampin’ Up!

The sentiment from the Itty Bitty Christmas stamp set was stamped on scrap Whisper White using Shaded Spruce ink before being adhered to the card front with the liquid glue.

www.crafty-rootes.co.uk -A row of trees Christmas card made using the Coming Home stamp set by Stampin’ Up!

I added a star to the top of the central tree and some Red Rhinestones to the other trees to complete the card.

I hope you like it.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A Christmas Card made using the Curvy Christmas stamp set and the Stitched Stars dies and Curvy dies by Stampin' Up!

Curvy Stars Christmas card

Posted on November 15, 2020November 9, 2020 by Mo Rootes

Today I am sharing a curvy stars Christmas card made using a lovely new super bundle. The bundle includes the Quite Curvy stamp set and Curvy dies which will be available in the January to June 2021 mini catalogue and an add on stamp set called Curvy Christmas stamp set plus the Classic Christmas designer series paper, these will only be available until the end of December or while stocks last and they are GORGEOUS.

To recreate the curvy stars Christmas card, you will need:

Thick Whisper White card base –- 8¼” by 5⅞” scored at 4⅛”
Classic Christmas dsp – 5⅞” by 3”
Scrap Misty Moonlight, Whisper White & Gold Foil

Taking the gorgeous dotty edge die from the Curvy die set and my Stampin’ Cut & Emboss Machine I cut off part of the card front. Doesn’t it look cool.

www.crafty-rootes.co.uk – A pretty curvy stars Christmas Card made using the Curvy Christmas stamp set and Curvy dies

I stamped the spray of stars, love this image, along the cut edge of the card front in Misty Moonlight ink. I also stamped the row of stars onto the inside panel in the same ink.

www.crafty-rootes.co.uk – A pretty curvy stars Christmas Card made using the Curvy Christmas stamp set and Curvy dies

I used the same dotty die to cut the same shape into the dsp panel and used my Paper Trimmer to trim the panel down to size before adhering it to the card front with Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – A pretty curvy stars Christmas Card made using the Curvy Christmas stamp set and Curvy dies

Using the Stitched Star dies I cut 3 stars from scrap Misty Moonlight, Whisper White and Gold Foil card.

www.crafty-rootes.co.uk – A pretty curvy stars Christmas Card made using the Curvy Christmas stamp set and Curvy dies

The stars were added to the card front using either liquid glue or Dimensionals. The sentiment from the Christmas Gleaming stamp set was stamped in Misty Moonlight ink onto scrap Whisper White card and fussy cut using Scissors. It was added to the card front with liquid glue.

www.crafty-rootes.co.uk – A pretty curvy stars Christmas Card made using the Curvy Christmas stamp set and Curvy dies

I used a trio of 2020-2021 In Color Enamel Dots to complete the card. I hope you like it.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Pink Snowflake

Posted on November 10, 2020November 9, 2020 by Mo Rootes

Today I am sharing a fabulous bright and shimmery pink snowflake card made using the Snowflake Wishes stamp set.

To recreate the pink snowflake card, you will need:

Smoky Slate card base –- 8¼” by 5⅞” scored at 4⅛” – Rounded lower right corner
Magenta Madness – 4⅜” by 2⅞” – Rounded lower right corner
Whisper White – 4 ¼” by 2 ¾” – Rounded lower right corner
Whisper White – 5⅜” by 3⅝” – Rounded lower right corner – for the inside
Scrap Magenta Madness

I began by stamping one of the groups of smaller snowflakes in Smoky Slate ink onto the Smoky Slate card base for a bit of tone on tone texture.

www.crafty-rootes.co.uk – A gorgeous shimmery, pink snowflake themed Christmas card using Stampin’ Up! product

Using the same ink I stamped one of the large snowflakes onto the smaller Whisper White panel. I took another of the large snowflakes and stamped it over the first snowflake in 2^nd Generation Smoky Slate ink.

www.crafty-rootes.co.uk – A gorgeous shimmery, pink snowflake themed Christmas card using Stampin’ Up! product

Using the So Many Snowflake Dies and my Stampin’ Cut & Emboss Machine I die cut one of the small snowflakes from the scrap Magenta Madness card. This snowflake was added on top of the stamped snowflakes using cut up Mini Dimensionals.

www.crafty-rootes.co.uk – A gorgeous shimmery, pink snowflake themed Christmas card using Stampin’ Up! product

The sentiment from the Snowflake Wishes stamp set was stamped below the snowflakes in Magenta Madness ink. I absolutely love this colour – it really pops doesn’t it?

www.crafty-rootes.co.uk – A gorgeous shimmery, pink snowflake themed Christmas card using Stampin’ Up! product

I managed to get a little Magenta Madness ink smudge below the sentiment so added a couple of the tiny snowflakes in the Magenta ink to hide it………

www.crafty-rootes.co.uk – A gorgeous shimmery, pink snowflake themed Christmas card using Stampin’ Up! product

The stamped layer was glued to the Magenta Madness layer using Multipurpose Liquid Glue and added to the card front on Dimensionals.

www.crafty-rootes.co.uk – A gorgeous shimmery, pink snowflake themed Christmas card using Stampin’ Up! product

To complete the card I added a Basic Rhinestone to the centre of the snowflake and I couldn’t resist spraying the whole card with my handmade Frost White Shimmer Spray. This was made by filling a Stampin’ Spritzer ¾ full of 70% alcohol and adding a pea sized drop of the shimmer paint. Shake well and spray. GORGEOUS………….

I hope you like the card.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Three Trees

Posted on November 8, 2020November 4, 2020 by Mo Rootes

I am loving the In The Pines Bundle and today I am making a Three Tree Christmas card using the Pine Woods dies.

To recreate the Three Tree card, you will need:

Early Espresso card base –- 8¼” by 5⅞” scored at 4⅛”
Pool Party – 5⅜” by 3⅝”
Whisper White – 3¼” by 1½” x 3
Whisper White – 5⅜” by 3⅝”
Scrap Shaded Spruce & Whisper White

Using my Cut & Emboss Machine I embossed the Pool Party layer using the Tasteful Textiles embossing folder.

A triple Christmas tree card made using the In the Pines stamp set and Pinewood Dies by Stampin' Up!

www.crafty-rootes.co.uk -Three trees Christmas card made using the Pine Wood Dies by Stampin’ Up!

On each of the three small White panels I stamped the ‘ground’ image in Early Espresso ink. I also randomly stamped the snowflakes in Pool Party ink on the same three panels.

www.crafty-rootes.co.uk -Three trees Christmas card made using the Pine Wood Dies by Stampin’ Up!

I die cut three tall pine trees using the Pine Woods dies and adhered them to the three white panels using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk -Three trees Christmas card made using the Pine Wood Dies by Stampin’ Up!

The panels were then added to the Pool Party layer using the same liquid glue. I wrapped a piece of Crinkle Seam Binding ribbon around the panel securing on the back with Sellotape.

www.crafty-rootes.co.uk -Three trees Christmas card made using the Pine Wood Dies by Stampin’ Up!

I added the panel to the Early Espresso card front on Dimensionals.

www.crafty-rootes.co.uk -Three trees Christmas card made using the Pine Wood Dies by Stampin’ Up!

The sentiment was stamped in Early Espresso ink onto scrap White card, flagged the ends and added it to the card with the liquid adhesive. I added a Crinkle Seam Binding bow using a Mini Glue Dot. I added a trio of Adhesive backed Sequins to complete the card.