Notes & Totes and Gallery Blooms Classes

Here are the cards I created for my July classes using the gorgeous Notes & Totes Dies combined with the gallery Blooms stamp set.

Colours used to make these cards are:

Beach Bag Card

Pretty Peacock card base – 8¼” by 5⅞” – scored at 4⅛”
Berry Burst card – 5⅜” by 3⅝”
Basic White – 5¼” by 3¾”
Woven Textures dsp – 4¾” by 3¼”
Basic White – 5½” by 3¾” – for the inside
Basic White – 1⅛” by ¼”
Scrap Bubble Bath, Berry Burst, Pretty Peacock & Black
Adhesive sheet

 

The 5¼” by 3¾” panel of Basic White card was embossed using the Corrugated 3D Embossing Folder. The embossed layer was then glued to the Berry Burst panel and then to the Pretty Peacock card base.

 

Half a bag was die cut from the Woven Textures dsp using the Notes & Totes Dies. Using Berry Burst ink I stamped the large flower spray from the Gallery Blooms Stamp set onto the front panel of bag and added the sentiment, from the Cheers & Sips stamp set to the left of the scoreline.

 

The base of the bag and the side straps were die cut from scrap Berry Burst card with Adhesive Sheet added to the back. The handle was die cut from plain Berry Burst scrap. The were all adhered to the bag before the side tabs and the base were glued to the card front.

 

The 2 bottles and sunglasses were die cut from scrap Bubble Bath, Pretty Peacock & Basic Black card. The pieces were then adhered together.

 

Using the smallest floral image and Pretty Peacock ink we stamped on to both bottles. All the pieces were glued together. The sunglasses were added to the front of the bag and the bottles tucked inside.

 

Pop-up Gift Card

Bubble bath card base – 8¼” by 5⅞” – scored at 4⅛”
Basic White – 5⅜” by 3⅝”
Berry Burst – 5⅜” by 3½”
Basic White – 3½” by 2½”
Woven Textures dsp – 4¾” by 6½”
Basic White – 5½” by 3½” – for the inside
Basic White – 2” by ¼”
Scrap Basic White, Bubble Bath, Berry Burst, Pretty Peacock & Woven Textures dsp

 

The 5⅜” by 3½” panel of Berry Burst card was embossed using the Corrugated 3D Embossing Folder. The embossed layer was then glued to the 5⅜” by 3⅝” Basic White panel and then to the Bubble Bath card base.

 

The 2 sides of the bag were die cut from Woven Textures dsp. The ¼” side tabs were adhered together and both side of the base trimmed down to ¼” and he side tabs removed. The handles and tassel pieces for both sides of the bag were die cut from scrap Basic White card before they were added to the inside of the card with the base panels straddling the scoreline.

 

A stitched arch was die cut from the 3½” by 2½” piece of Basic White card using the Everyday Arches Dies. This was then mounted onto the card front on Dimensionals.

 

All pieces for the bottles were die cut from scrap card or dsp and glued together. The smaller floral stamp was stamped in Berry Burst ink onto the Bubble Bath and Berry Burst bottles before all the bottles were glued to the stitched arch.

 

The sentiment, from the Cheers and Sips stamp set was stamped in Berry Burst ink onto the small strip of Basic White card. We flagged the ends and added the sentiment to the card front.

 

Floral Card

Berry Burst card base – 8¼” by 5⅞” – scored at 4⅛”
Pretty Peacock – 4⅝” by 2⅞”
Basic White – 4½” by 3¾”
Bubble Bath – 2¼” by 2¼”
Basic White – 2½” by 1”
Basic White – 5½” by 3¾” – for the inside

Using Berry Burst ink we randomly stamped the large floral image all over the 4½” by 3¾” piece of Basic White card.

 

The stamped panel was then glued to the Pretty Peacock layer.

 

The square of Bubble Bath card was cut in half from corner to corner and the halves were glued to the upper left and lower right corners.

 

The whole piece was then mounted onto the Berry Burst card front on Dimensionals.

 

Using the Textured Notes Dies I cut a label from the smallest piece of Basic White card and stamped the sentiment from the Throughout The year stamp set onto the label with Pretty Peacock ink before being added to the card front.

 

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used: