A baby card made using Lovely Arrangements stamp set, the Party Alphabet dies from Stampin' Up! and the eclipse technique

Eclipse Baby Card – Stamping Inkspirations Blog Hop

Posted on March 14, 2026March 13, 2026 by Mo Rootes

Hello and welcome to the Stamping Inkspirations Blog Hop where we are showcasing the eclipse technique. I have made my card using the Lovely Arrangements stamp set and Party Alphabet dies.

Colours used to make this card are:

I created the Eclipse Baby card using the following supplies:

Bubble Bath card base – 8” by 8” – scored at 4”
Lost Lagoon – 7½” by 3½”
Basic White – 7⅜” by 3⅜”
Basic White – 7¾” by 3¾” for the inside
Lost Lagoon – ⅞” by ⅝”
Basic White scrap

Using Secret Sea ink, I randomly stamped the two flowers across the 7⅜” by 3⅜” panel of Basic White card. I added colour to the flowers using the Light and Dark Bubble Bath Blends Pens.

www.crafty-rootes.co.uk – The Lovely Arrangements stamp set and Party Alphabet dies used to make a baby card using the eclipse technique – Stamping Inkspirations Blog Hop

The leaves, from the Fragrant Layers stamp set were added around the flowers with Lost Lagoon ink.

www.crafty-rootes.co.uk – The Lovely Arrangements stamp set and Party Alphabet dies used to make a baby card using the eclipse technique – Stamping Inkspirations Blog Hop

From the decorated panel I cut out the letters BABY using the Party Alphabet Dies, taking care to save all the pieces. The die cut panel was then adhered to the Lost Lagoon layer before it was glued to the Bubble Bath card front.

www.crafty-rootes.co.uk – The Lovely Arrangements stamp set and Party Alphabet dies used to make a baby card using the eclipse technique – Stamping Inkspirations Blog Hop

I die cut 3 more of each letter from scrap Basic White card and glued the 3 letters one on top of the other before adding the decorated letter on the very top.

www.crafty-rootes.co.uk – The Lovely Arrangements stamp set and Party Alphabet dies used to make a baby card using the eclipse technique – Stamping Inkspirations Blog Hop

Each letter was then added into the negative space and the left-over inner pieces of the letters pushed down into the gaps.

www.crafty-rootes.co.uk – The Lovely Arrangements stamp set and Party Alphabet dies used to make a baby card using the eclipse technique – Stamping Inkspirations Blog Hop

The word NEW, from the Reason To Celebrate stamp set was stamped in Secret Sea ink onto the small piece of Lost Lagoon card. This was added to the card front on a Dimensional.

www.crafty-rootes.co.uk – The Lovely Arrangements stamp set and Party Alphabet dies used to make a baby card using the eclipse technique – Stamping Inkspirations Blog Hop

A trio of 2024 – 2026 In Color Flat Pearls were added to complete the card.

Please hop on to see what my fellow crafters have created. Next up is the lovely Robin Broome

Leonie Stuart ● Jan Musselman

Mo Rootes ● Robin Broome ● Angie McKenzie

Order goodies/Join My Team

I would love to be your demonstrator if you don’t already have one and live in the UK. I would also be delighted to send you a catalogue if you do not have a demonstrator. I would be happy to place an order for you, or you can order directly by clicking on the “shop online” button.

Contact me for information about joining my team or click on the ‘Join My Team’ button

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Sweet Baby Boy Card

Posted on November 23, 2025November 16, 2025 by Mo Rootes

My daughter’s best friends have recently had their first baby; an adorable little boy and I made this sweet card to send to them using the Cutest Onsie stamp set and dies.

Colours used to make this card are:

To recreate the sweet baby boy card, you will need:

Balmy Blue card base – 8¼” by 5⅞” – scored at 4⅛”
Summer Splash card – 8¼” by 5⅞” – scored at 4⅛”
Basic White card – 5” by 3¼”
Summer Splash card – 5⅛” by 3⅜”
Basic White card – 5½” by 3¾” for the inside
Secret Sea card – 1⅜” by ⅜”
Scrap Silver Foil, Beautiful Bokeh dsp and 2024 – 2026 In Color dsp

Using Balmy Blue ink I stamped the cloud image from the Cutest Onsie stamp set in the upper left and lower right of the Balmy Blue card front.

www.crafty-rootes.co.uk – The Cutest Onsie stamp set and co-ordinating dies used with the Beautiful Bokeh dsp to make an adorable sweet baby boy card

The smaller panel of Basic White was then embossed using the So Swirly embossing Folder. The embossed panel was glued to the Summer Splash layer

www.crafty-rootes.co.uk – The Cutest Onsie stamp set and co-ordinating dies used with the Beautiful Bokeh dsp to make an adorable sweet baby boy card

A length of Balmy Blue Baker’s Twine from my stash was wrapped around the panel before it was glued to the Balmy Blue card front.

www.crafty-rootes.co.uk – The Cutest Onsie stamp set and co-ordinating dies used with the Beautiful Bokeh dsp to make an adorable sweet baby boy card

The sweet onsie was stamped on 2 scraps of designer series paper (dsp). These were the die cut using the Cutest Onsie dies. I also die cut 2 coat hangers from scrap Silver Foil. The onsies were then added to the card front, one on Dimensionals and the other adhered down flat.

www.crafty-rootes.co.uk – The Cutest Onsie stamp set and co-ordinating dies used with the Beautiful Bokeh dsp to make an adorable sweet baby boy card

The sentiment was stamped in Versamark ink onto the small piece of Secret Sea card. I covered it with White Embossing Powder and set it using a Heat Tool before adding it to the card front.

www.crafty-rootes.co.uk – The Cutest Onsie stamp set and co-ordinating dies used with the Beautiful Bokeh dsp to make an adorable sweet baby boy card

A twine bow and a trio of Rainbow Dots completed the card.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Sweet Baby Girl card

Posted on August 14, 2024August 6, 2024 by Mo Rootes

Here is a sweet girl baby card made using the Cutest Onesie stamp set and co-ordinating Dies.

Colours in this card are:

To recreate the sweet girl card, you will need:

Petunia Pop card base 8¼” by 5⅞” – scored at 4⅛”
Basic White card – 5⅜” by 3⅝”
Pretty in Pink card – 5¼” by 3½”
Basic White card – 4” by 4”
Basic White card – 5½” by 3¾” for the inside
Scrap Basic Black and Basic White card and 2023 – 2025 In Color dsp

From the square of Basic White card, I die cut a circle with a decorative edge using the Spotlight In Nature Dies.

www.crafty-rootes.com – The Cutest Onesie stamp set used to make a sweet baby girl card

The panel of Pretty In Pink card was embossed using the Dotted Circles Embossing Folder. The embossed panel was adhered to the 5⅜” by 3⅝” piece of Basic White card and then to the Petunia Pop card base. The die cut circle was added t the card front on Dimensionals.

www.crafty-rootes.com – The Cutest Onesie stamp set used to make a sweet baby girl card

I stamped the onesie, with Memento Tuxedo Black ink onto scraps of 2023 – 2025 In Color dsp, one on Pretty in Pink and the other in Petunia Pop. These were die cut using the Cutest Onesie Dies.

www.crafty-rootes.com – The Cutest Onesie stamp set used to make a sweet baby girl card

2 coat hangers were die cut from scrap Basic Black card and fed through the slit in the top of each onesie.

www.crafty-rootes.com – The Cutest Onesie stamp set used to make a sweet baby girl card

The sentiment was stamped in Petunia Pop ink onto scrap Basic White card, trimmed down and glued to the card front. A trio of 2023 – 2025 In Color Shimmer Gems completed the card.

www.crafty-rootes.com – The Cutest Onesie stamp set used to make a sweet baby girl card

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A sweet congratulations card made for the Stamp 'N Hop Blog Hop using the Cradled with Love Sale-a-Bration stamp set from Stampin' Up!

Cradled Card for the Stamp ‘N Hop Blog Hop

Posted on January 13, 2024January 11, 2024 by Mo Rootes

Hello and welcome to the Stamp ‘N Hop Blog Hop where we are sharing projects made using some of our gorgeous Sale-a-Bration choices. I have used the Cradled with Love stamp set to make a pretty baby card for friends who have just welcomed their first grandchild.

Colours in this project are:

To recreate the cradle card, you will need:

Boho Blue card base – 8¼” by 5⅞” – scored at 1¼” & 4⅛”
Basic White card – 5⅝” by 2¾”
Flight & Airy dsp – 5½” by 2⅝”
Basic White card – 5” by 3¾”
Basic White card – 5⅝ by 3⅞”
Basic White card – 5⅝” by 1⅛”

I glued the panel of Flight and Airy dsp to the 5⅝” by 2¾” piece of Basic White card. This was then glued to the Boho Blue card front.

www.crafty-rootes.com – The Cradled with Love Sale-a-Bration stamp set used to make a sweet congratulations card for the Stamp ‘N Hop Blog Hop

The two 5⅝” by 1⅛” strips of Basic White card were embossed using the Softly Sophisticated Embossing Folder. One of the embossed strips was then adhered to the 1 ¼” flap on the front of the card. I then glued this strip to the dsp panel.

www.crafty-rootes.com – The Cradled with Love Sale-a-Bration stamp set used to make a sweet congratulations card for the Stamp ‘N Hop Blog Hop

The second embossed strip was adhered to the 5⅝ by 3⅞” panel of Basic White card. I glued this inside the card.

www.crafty-rootes.com – The Cradled with Love Sale-a-Bration stamp set used to make a sweet congratulations card for the Stamp ‘N Hop Blog Hop

Using the Scalloped Contour Dies, I die cut a Scalloped Rectangle. I stamped the rug onto the label in Balmy Blue ink. The cradle was then stamped in Pecan Pie ink. I added the mobile using Smoky Slate ink.

www.crafty-rootes.com – The Cradled with Love Sale-a-Bration stamp set used to make a sweet congratulations card for the Stamp ‘N Hop Blog Hop

The following Blends Alcohol Pens were used to colour in the image – Balmy Blue, Boho Blue, Misty Moonlight, Lemon Lolly and Crumb Cake. The scalloped rectange was the glued to the 1⅛” embossed strip. This gives the illusion that the panel is floating.

www.crafty-rootes.com – The Cradled with Love Sale-a-Bration stamp set used to make a sweet congratulations card for the Stamp ‘N Hop Blog Hop

A trio of 2023 – 2025 In Colour Dots completed the card.

Please hop along to see what my fellow demonstrators have to share with us today.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty card to celebrate the birth of a baby girl made using the sweet Cradled In Love stamp set by Stampin' Up!

Cradled in Love card

Posted on December 29, 2023January 5, 2024 by Mo Rootes

Today I am sharing a baby card made using the adorable Cradled with Love Stamp set which will be available from the 4^th January 2024 as a Sale-a-Bration choice.

Colours used in this project are:

To recreate the cradled with love card, you will need:

Bubble Bath card base – 8¼” by 5⅞” – scored at 4⅛”
Basic White card – 5⅝” by 3⅞”
Softly Stippled DSP – 5½” by 3¾”
Bubble Bath card – 5½” by 4”
Basic White card – 4¾” by 3¼”
Basic White card – 5½” by 3¾” – for the inside
Basic White card – 3” by ⅜”

The piece of Softly Stippled dsp was adhered to the 5⅝” by 3⅞” piece of Basic White card and then the panel was glued to the Bubble Bath card base.

Using the Countryside Corners Dies, I die cut a label from the 4¾” by 3¼” panel of Basic White card. From the 5½” by 4” panel of Bubble Bath, I die cut a larger label.

www.crafty-rootes.com – The sweet Cradled In Love stamp set used to make a pretty card to celebrate the birth of baby girl

The cradle was stamped in Smoky Slate ink onto the Basic White label. I added the mobile and the mobile hanger using the same ink.

www.crafty-rootes.com – The sweet Cradled In Love stamp set used to make a pretty card to celebrate the birth of a baby girl

The image was coloured with the following Blends Pens – Bubble Bath, Flirty Flamingo, Lemon Lolly, Lost Lagoon and Smoky Slate. The ‘ground’ was added in Smoky Slate.

www.crafty-rootes.com – The sweet Cradled In Love stamp set used to make a pretty card to celebrate the birth of a baby girl

The decorated panel was glued to the Bubble Bath label and mounted onto the card front on Dimensionals.

www.crafty-rootes.com – The sweet Cradled In Love stamp set used to make a pretty card to celebrate the birth of a baby girl

The sentiment was stamped in Pebbled Path ink onto the strip of Basic White card. I trimmed it down with scissors and added it to the card front.

www.crafty-rootes.com – The sweet Cradled In Love stamp set used to make a pretty card to celebrate the birth of a baby girl

A Glittered Organdy Ribbon bow and a trio of Adhesive-backed Sequins completed the card. So pretty.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The Lazy Days Dies and the Bright & Beautiful designer series paper by Stampin' Up! used to make a pretty baby card

Rocking Chair Baby card

Posted on May 30, 2023May 20, 2023 by Mo Rootes

Here is a sweet card celebrating the arrival of a baby boy made using the Lazy Days Dies and the Bright & Beautiful designer series paper.

Colours used to make this card are:

Basic White

Tahitian Tide

Blueberry Bushel

To recreate the palm leaves card, you will need:

Blueberry Bushel card base – 8¼” by 5⅞” – scored at 4⅛”
Tahitian Tide card – 5⅜” by 3⅜”
Basic White card – 5¼” by 3¼”
Basic White card – 5¾” by 2”
Basic White card – 3” by 3”
Basic White card – 5½” by 3¾” – for the inside
Scrap Tahitian Tide & Blueberry Bushel

I used Multipurpose Liquid Adhesive, I glue the Bright & Beautiful dsp to the panel of Tahitian Tide card.

The scalloped edge was die cut using the Scalloped Contour Dies from the long stip of Basic White and added to the right side of the dsp panel. The whole piece was then glued to the Blueberry Bushel card base.

www.crafty-rootes.co.uk – A pretty baby card made using the Lazy Days Dies and the Bright & Beautiful designer series paper

A couple of strips of Seal+ on the dsp panel secured the Tahitian Tide Open Weave Metallic Rbbon in place.

www.crafty-rootes.co.uk – A pretty baby card made using the Lazy Days Dies and the Bright & Beautiful designer series paper

From the square of Basic White card I die cut a stitched circle using the Stylish Shapes Dies. I added a light coating of Tahitian Tide ink using a Blending Brush.

www.crafty-rootes.co.uk – A pretty baby card made using the Lazy Days Dies and the Bright & Beautiful designer series paper

From scrap Blueberry Bushel, using the Lazy Days Dies I die cut the pretty rocking chair and glued it to the inked circle, it was added to the card front on Dimensionals.

www.crafty-rootes.co.uk – A pretty baby card made using the Lazy Days Dies and the Bright & Beautiful designer series paper

The sentiment, from the Charming Sentiments stamp set, was stamped on scrap Blueberry Bushel card, covered with White Embossing Powder and heat set. I then trimmed it down with Scissors and added it to the card front.

www.crafty-rootes.co.uk – A pretty baby card made using the Lazy Days Dies and the Bright & Beautiful designer series paper

A little heart, die cut from scrap Tahitian Tide card using the Crafting With You Dies, was added to complete the card.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A gorgeous faux stepper baby card made using the Elephant Parade stamp set by Stampin' Up! for the Ink. Stamp. Share. Blog Ho

Sweet Elephant Faux Stepper card for the Ink. Stamp. Share Blog Hop

Posted on July 9, 2022June 17, 2022 by Mo Rootes

Hello and welcome to the Ink. Stamp. Share Blog Hop where we are sharing something we have been working on. I am sharing a sweet elephant faux – stepper card made for a cousin and her husband who have just welcomed their first child, a beautiful baby boy. I couldn’t resist using the adorable Elephant Parade stamp set. The card was inspired Melva Peters. I have adjusted the size and scoring to work with UK A4 card stock.

Colours used in this project are:

To recreate the sweet elephant card, you will need:

Thick Basic White card – 8” by 5 ¾” – scored at 1”, 2” & 5”
Design A Daydream dsp – 5⅝” by ⅞”
Design A Daydream dsp – 5⅝” by 2¾”
Pool Party card – 8” by 2¾” – scored at 4”
Basic White card – 4” by 2¾”
Scrap Pear Pizzazz card

Using Multipurpose Liquid Adhesive I added to pieces of Design A Daydream dsp to the card front. I then burnished on all the score lines.

A gorgeous faux stepper baby card made using the Elephant Parade stamp set by Stampin' Up! for the Ink. Stamp. Share. Blog Hop

www.crafty-rootes.co.uk – The adorable Elephant Parade stamp set used to make a faux stepper baby card for the Ink. Stamp. Share Blog Hop

I added the Pool Party panel to the front and back using a little liquid glue along the bottom.

www.crafty-rootes.co.uk – The adorable Elephant Parade stamp set used to make a faux stepper baby card for the Ink. Stamp. Share Blog Hop

The partial sentiment from the Charming Sentiments stamp set was stamped in Memento Tuxedo Black ink onto the panel of Basic White card. The unwanted portion was masked off using a Post It Note

www.crafty-rootes.co.uk – The adorable Elephant Parade stamp set used to make a faux stepper baby card for the Ink. Stamp. Share Blog Hop

The cute little elephant was stamped in Memento Tuxedo Black ink above the sentiment. It was coloured in using Smoky Slate and Petal Pink Blends. The balloon was stamped in the same ink and coloured with Pool Party Blends.

www.crafty-rootes.co.uk – The adorable Elephant Parade stamp set used to make a faux stepper baby card for the Ink. Stamp. Share Blog Hop

I Used the Scalloped Contour Dies to die cut the stamped piece and adhered it to the card front with the liquid glue. The leaves were stamped in Pear Pizzazz ink onto scrap Pear Pizzazz card and die cut using the Elephant Dies. It was added to the decorated panel with liquid glue.

www.crafty-rootes.co.uk – The adorable Elephant Parade stamp set used to make a faux stepper baby card for the Ink. Stamp. Share Blog Hop

I coloured in 3 Basic Pearls using a Pool Party Blends Pen and added them to complete the card.

Such a pretty card to welcome a new member of the family.

Please continue around the hop to see what my fellow demos have been making recently.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The All for Baby stamp set and Baby Clothes Dies used to make a pretty card for new grandparents and shared on the Ink. Stamp. Share Blog Hop

Sweet Baby for the Ink. Stamp. Share. Blog Hop

Posted on November 13, 2021November 11, 2021 by Mo Rootes

Hello and welcome to the Ink, Stamp, Share Blog Hop where we are showcasing something we have been working on. I have chosen to share a sweet hello baby card made for one of my lovely team members who became a grandmother for the first time recently.

Colours used in this project are:

To recreate the sweet baby card, you will need:

Thick Basic White card base – 11¾” by 4⅛” scored at 5⅞”
Basic Gray card – 5⅜” by 3⅝”
Beauty of the Earth dsp – 5¼” by 3½”
Scrap Basic White & Basic Gray

I used Basic Gray ink to stamp the washing line onto the Beauty of the Earth dsp panel.

www.crafty-rootes.co.uk – A sweet baby card made for new grandparents using the All for Baby stamp set and Baby Clothes Dies

Using Multipurpose Liquid Adhesive, I added the piece of dsp to the Basic Gray panel. The panel was then added to the Thick Basic White card front using the same glue.

www.crafty-rootes.co.uk – A sweet baby card made for new grandparents using the All for Baby stamp set and Baby Clothes Dies

I stamped the sweet little Babygro onto scrap Basic White card using Night of Navy ink. I used Mint Macaron ink to stamp the babies’ bib and Basic Gray ink to stamp the bear. These were all die cut using my Stampin’ Cut & Emboss Machine and the Baby Clothes Dies.

www.crafty-rootes.co.uk – A sweet baby card made for new grandparents using the All for Baby stamp set and Baby Clothes Dies

Using the same dies I cut a few of the adorable clothes pegs from the scrap Basic Gray card.

The sentiment from the All for Baby stamp set was stamped in Night of Navy ink.

www.crafty-rootes.co.uk – A sweet baby card made for new grandparents using the All for Baby stamp set and Baby Clothes Dies

I added all the die cuts to the card front on Dimensionals and added the clothes pegs with a dab of liquid glue.

www.crafty-rootes.co.uk – A sweet baby card made for new grandparents using the All for Baby stamp set and Baby Clothes Dies

I hope you like the card.

Please hop on to see what my friends have to share with you today.

Order goodies/Join My Team

Thank you for visiting my blog today, come back soon.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The Penguin Place stamp set by Stampin' Up! used to make a pretty penguin new baby for a Blog Hop

Penguin Baby card

Posted on October 24, 2021October 24, 2021 by Mo Rootes

Today I am sharing a couple of baby cards made for a team challenge. I didn’t have any baby stamp sets so made Penguin baby cards using the Penguin Place stamp set.

Colours used in this project are:

To recreate the penguin baby card, you will need:

Petal Pink card base – 8¼” by 5⅞” scored at 4⅛” – rounded upper left corner
Calypso Coral card – 5⅜” by 3⅝” – rounded upper left corner
Basic White card – 5¼” by 3½” – rounded upper left corner
Basic White card – 5½” by 3¾” – rounded upper left corner
Scrap Petal Pink card

The Penguin Place stamp set by Stampin' Up! used to make a pretty pnguin new baby for a Blog Hop

www.crafty-rootes.co.uk – A sweet penguin baby card made for the Share It Sunday Blog Hop using the Penguin Place stamp set

I began by stamping the small cluster of stars and snowflakes on a scrap of Petal Pink card before using the Playful Alphabet dies to cut out the BABY. The letters were glued to the smaller Basic White panel. I added the ‘hello’ from the Biggest Wish Stamp set in Calypso Coral ink to the panel.

www.crafty-rootes.co.uk – A sweet penguin baby card made for the Share It Sunday Blog Hop using the Penguin Place stamp set

The penguin was stamped in Memento Tuxedo Black ink and the feet and beak added win So Saffron.

www.crafty-rootes.co.uk – A sweet penguin baby card made for the Share It Sunday Blog Hop using the Penguin Place stamp set

The balloon strings were stamped in Memento Tuxedo Black ink and the balloons added in Petal Pink ink. I added a trio of Calypso Coral hearts around the balloons.

www.crafty-rootes.co.uk – A sweet penguin baby card made for the Share It Sunday Blog Hop using the Penguin Place stamp set

The stamped layer was glued to the Calypso Coral panel with Multipurpose Liquid Adhesive. It was then added to the Petal Pink card base with Dimensionals.

www.crafty-rootes.co.uk – A sweet penguin baby card made for the Share It Sunday Blog Hop using the Penguin Place stamp set

A trio of Elegant Faceted Dots was added to complete the card. I made another card but reversed the colours.

www.crafty-rootes.co.uk – A sweet penguin baby card made for the Share It Sunday Blog Hop using the Penguin Place stamp set

Hope you like the cards.

Order goodies/Join My Team

Thank you for visiting my blog today, come back soon.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Welcome Baby

Posted on March 24, 2020March 18, 2020 by Mo Rootes

Today I am sharing a sweet welcome baby card made for a new member of the family – Amelia Jane who arrived in January and is adorable. I have used the sweet Welcome Easter stamp set to make today’s card.

To recreate the Welcome Baby card you will need

Thick Whisper White card base – 8¼” by 5⅞” scored at 4⅛”
2019 – 2021 In Color dsp – 5⅜” by 3⅝”
Whisper White – 3¼” by 2½”
Scrap Whisper White

I began by adhering the dsp to the front of the Thick Whisper White card base using Multipurpose Liquid Adhesive.

A pretty new baby card made using the sweet lamb from the Welcome Easter stamp set by Stampin' Up!

www.crafty-rootes.co.uk -A gorgeous welcome baby card made using the Welcome easter stamp set

The adorable little lamb was stamped on the left hand side of the small Whisper White panel using Memento Tuxedo Black ink. The sentiment was stamped to the right of the lamb in Rococo Rose ink

www.crafty-rootes.co.uk -A gorgeous welcome baby card made using the Welcome easter stamp set

The lamb’s nose and bow were coloured in using the Rococo Rose combo Blends Markers then I outlined the lamb using the light Soft Sea Foam Blends Marker and faded out the harsh lines by using the Color Lifter.

www.crafty-rootes.co.uk -A gorgeous welcome baby card made using the Welcome easter stamp set

I die cut the lacy edgelit from the Arts and Crafts dies from scrap Whisper White card and adhered the strips to the stamped panel with the same liquid adhesive. The ends were trimmed off and the panel was then added to the card front on Dimensionals.

www.crafty-rootes.co.uk -A gorgeous welcome baby card made using the Welcome Easter stamp set

To complete the sweet card I coloured in 3 Basic Pearls using the dark Rococo Rose Blends Marker and added them to the card front.

www.crafty-rootes.co.uk -A gorgeous welcome baby card made using the Welcome Easter stamp set

Such a simple but pretty card. I hope you like it

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

GDPR

Thanks for visiting my blog today, I love to read what you think of my projects so please do let me know. In line with new Data Protection Legislation (GDPR), by commenting you do so in the knowledge that your name & comment are visible to all who visit this blog and you thereby consent to the use of that personal information for that specific purpose. Please stop by again soon.

Details of the products I used for this project can be found below.

Mo x

Supplies used: