A Pretty floral card featuring the Abigail Rose Designer Series Paper by Stampin' Up!, coloured with soft, pastel shades

Petal Pink Roses card

Posted on August 16, 2022August 6, 2022 by Mo Rootes

I have been colouring in the gorgeous Abigail Rose designer Series Paper today and have used it to make a pretty petal pink roses card.

The colours used in this project are:

To recreate the saffron roses card, you will need:

Petal Pink card base – 8¼” by 5⅞” scored and folded at 4⅛”
Basic Gray card – 5⅜” by 3⅝”
Abigail Rose dsp – 5¼” by 3½”
Basic Gray card – 2¼” by 2¼”

Having cut the piece of Abigail Rose dsp, I used the following Blend Pens to colour in the flowers and leaves: Petal Pink, So Saffron & Soft Sea Foam.

www.crafty-rootes.co.uk – The Abigail Rose designer series paper coloured with soft shades to create a pretty Petal Pink roses card

The coloured panel of dsp was then glued to the Basic Gray panel using Multipurpose Liquid Adhesive. The whole panel was added to the Petal Pink card base using the same glue.

www.crafty-rootes.co.uk – The Abigail Rose designer series paper coloured with soft shades to create a pretty Petal Pink roses card

I added a strip of Tear ‘n Tape to the card front and used it to secure a strip of Frayed Ribbon. Another strip of Tear ‘n Tape secured a nest of Gold Elegant Trim.

www.crafty-rootes.co.uk – The Abigail Rose designer series paper coloured with soft shades to create a pretty Petal Pink roses card

The sentiment from the Cottage Rose stamp set was stamped onto Basic Gray card in Versamark ink, covered in White Embossing Powder and heat set using a Heat Tool. I die cut the sentiment using the Beautiful Shapes Dies. The sentiment was added over the ribbon with Dimensionals.

www.crafty-rootes.co.uk – The Abigail Rose designer series paper coloured with soft shades to create a pretty Petal Pink roses card

A scattering of Fine Sparkle Gems completed the card.

www.crafty-rootes.co.uk – The Abigail Rose designer series paper coloured with soft shades to create a pretty Petal Pink roses card

Such a pretty card. I hope you like it.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Customer thank you cards made using the Rings of Love designer Series Paper by Stampin' Up!

Rings of Love card for the Kylie Bertucci Demo Blog Hop

Posted on August 15, 2022August 6, 2022 by Mo Rootes

Hello and welcome to the Kylie Bertucci Demonstrator Blog Hop where we are sharing thank you cards made for our customers. I have used the gorgeous Rings of Love Designer Series Paper.

Colours used in this project are:

To recreate the Rings of Love thank you card, you will need:

Thick Very Vanilla card base – 8¼” by 5⅞” scored and folded at 4⅛”
Very Vanilla card – 5⅜ by 3⅝”
Distressed Gold card – 3½” by 3½”
Rings of Love designer Series Paper (dsp)

Like many others I used to hate fussy cutting with a passion. I have however, discovered that the more you do it the easier it becomes and I spent a happy evening fussy cutting leaves and acorns from the sheets of the Rings of Love dsp.

www.crafty-rootes.co.uk – The Rings of Love designer Series Paper (dsp) used to make pretty cards for the Kylie Bertucci Demo Blog Hop

I nested two of the Stylish Shapes Dies together and used them to die cut a circle frame from the Distressed Gold card.

www.crafty-rootes.co.uk – The Rings of Love designer Series Paper (dsp) used to make pretty cards for the Kylie Bertucci Demo Blog Hop

The sentiment from the Cup of Tea Stamp set, was stamped onto the panel of Very Vanilla in Soft Suede ink and the distressed gold frame added on Mini Dimensionals. The overhanging edge was trimmed off.

www.crafty-rootes.co.uk – The Rings of Love designer Series Paper (dsp) used to make pretty cards for the Kylie Bertucci Demo Blog Hop

The fussy cut leaves and acorns were then added to the left part of the die cut circle using Mini Dimensionals and a little Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – The Rings of Love designer Series Paper (dsp) used to make pretty cards for the Kylie Bertucci Demo Blog Hop

A trio of Brushed Brass Butterflies completed the card.

www.crafty-rootes.co.uk – The Rings of Love designer Series Paper (dsp) used to make pretty cards for the Kylie Bertucci Demo Blog Hop

I used the left over smaller Distressed Gold circles and fussy cut dsp to create more cards.

www.crafty-rootes.co.uk – The Rings of Love designer Series Paper (dsp) used to make pretty cards for the Kylie Bertucci Demo Blog Hop

Please continue on around the hop to share the inspiration shared by my fellow demonstrators.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty card made the Sweet Songbird stamp set and Design A Daydream designer series paper by Stampin' Up!

Sweet Songbird card

Posted on August 9, 2022July 26, 2022 by Mo Rootes

Here is a sweet card made using the pretty Sweet Songbirds stamp set. I originally made this for a sketch challenge……. then I realised that I hadn’t read the brief properly and had used the wrong products……. don’t you just hate when you do that!

Colours used in this project are:

To recreate the songbird card, you will need:

Thick Basic White card – 8¼” by 5⅞” scored and folded at 4⅛”
Pool Party card – 5½” by 3¾”
Design A Daydream dsp – 3¾” by 3¾”
Design A Daydream dsp – 5½” by 1½”
Design A Daydream dsp – 4½” by 1⅞”
Design A Daydream dsp – 3¾” by ⅜”
Basic White card – 3½” by 3½”
Basic White card – 1½” by 1½”
Basic White card – 1” by ½” x 3
Scrap of Vellum

I began by cutting all the pieces of the Design A Daydream dsp and adhering them to the Pool Party panel.

Songbird stamp set and Design A Daydream designer series paper by Stampin' Up!

www.crafty-rootes.co.uk – The Sweet Songbird stamp set used with the Design A Daydream designer series paper to make a pretty card

The 3 small ½” pieces of Basic White were then tucked along the bottom edge.

www.crafty-rootes.co.uk – The Sweet Songbird stamp set used with the Design A Daydream designer series paper to make a pretty card

The largest circle from the Stylish Shapes Dies was die cut from the larger square of Basic White card. The branch was stamped, a couple of times, in Crumb Cake ink along the bottom of the circle. I added leaves in Old Olive ink. The bird’s feet were stamped in Blackberry Bliss ink and the bird in Pool Party ink. I added the eyes in Blackberry Bliss, a beak in Daffodil Delight and flowers in Petal Pink ink. The stamped circle was added to the card front on Dimensionals.

www.crafty-rootes.co.uk – The Sweet Songbird stamp set used with the Design A Daydream designer series paper to make a pretty card

The sentiment from the same stamp set was stamped in Blackberry Bliss ink onto the smaller Basic White square and die cut using the same set of dies. It was added to the card front on a Dimensional.

www.crafty-rootes.co.uk – The Sweet Songbird stamp set used with the Design A Daydream designer series paper to make a pretty card

Using the Meadow Dies, I die cut a butterfly from scrap Vellum and added it to the card front with Multipurpose Liquid Adhesive and a line of Basic Rhinestones added as the butterfly body.

www.crafty-rootes.co.uk – The Sweet Songbird stamp set used with the Design A Daydream designer series paper to make a pretty card

Such a pretty card. I hope you like it.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty house themed thank you card made using the Sale-a-Bratio dsp called Rings of Love by Stampin' Up!

Houses card

Posted on July 29, 2022July 25, 2022 by Mo Rootes

I am loving the Ringed With Love Designer Series Paper which is one of the items you can choose for free with a £50 order from the Sale-a-Bration Brochure and I have used it to make a thank you card featuring houses.

Colours used in this card are:

To recreate the houses card, you will need:

Thick Basic White card base – 8¼” by 5⅞” scored and folded at 4⅛” – rounded upper left corner
Night of Navy card – 5⅜” by 3⅝” – rounded upper left corner
Ringed with Love dsp – 5¼” by 3½” – rounded upper left corner
Basic White card – 2” by 2”

I used Multicoloured Liquid Adhesive to glue the panel of dsp to the Night of Navy layer.

www.crafty-rootes.co.uk – The gorgeous Ringed with Love Dseigner Series Paper used to make a pretty house themed thank you card

A length of Parakeet Party Woven Metallic Ribbon around the panel, twice and secured in place with Sellotape.

www.crafty-rootes.co.uk – The gorgeous Ringed with Love Dseigner Series Paper used to make a pretty house themed thank you card

The sentiment, from the Cup of Tea stamp set was stamped in Night of Navy ink onto the small square of Basic White. This was die cut using the Stylish Shapes dies.

www.crafty-rootes.co.uk – The gorgeous Ringed with Love Dseigner Series Paper used to make a pretty house themed thank you card

The sentiment was added to the card front with Mini Glue Dots. These give a little height but won’t increase the postage.

www.crafty-rootes.co.uk – The gorgeous Ringed with Love Dseigner Series Paper used to make a pretty house themed thank you card

A trio of Champagne Rhinestones completed the card.

www.crafty-rootes.co.uk – The gorgeous Ringed with Love Dseigner Series Paper used to make a pretty house themed thank you card

I hope you like it.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Wonderful World stamp set and Wonderful World dsp a Sale-a-Bration offer from Stampin' Up! used for a pretty card

Floral Wonderful World card

Posted on July 3, 2022July 3, 2022 by Mo Rootes

Here is a pretty birthday card made using the floral Wonderful World stamp set and the Wonderful World designer Series Paper, both are available for free with a £90 order from the July-August 2022 Sale-a-Bration Brochure.

Colours used in this project are:

To recreate the floral wonderful world card, you will need:

Orchid Oasis card base – 8¼” by 5⅞” scored and folded at 4⅛” – rounded upper left corner
Basic White card – 5⅝” by 3⅞” – rounded upper left corner
Wonderful World dsp – 5½” by 3¾” – rounded upper left corner
Basic White card – 3” by 3”
Wonderful World dsp – 3¾” by ½”
Basic White card – 5½” by 3¾” – rounded upper left corner
Scrap Basic White card

Using Multipurpose Liquid Adhesive, I glued the Wonderful World dsp to the larger Basic White panel. It was then glued to the Orchid Oasis card base.

www.crafty-rootes.co.uk – The gorgeous Wonderful World stamp set and co-ordinating Wonderful World dsp used for a pretty floral card

I added a strip of the Wonderful World dsp across the card using the same liquid glue.

www.crafty-rootes.co.uk – The gorgeous Wonderful World stamp set and co-ordinating Wonderful World dsp used for a pretty floral card

Using a Rich Razzleberry Stamp ‘n Write Marker to ink up the flower head. The stems and leaves were inked up with a Pear Pizzazz Stamp ‘n Write Marker. I huffed on the stamp to re-moisten the ink and stamped the image onto the square of Basic White card.

www.crafty-rootes.co.uk – The gorgeous Wonderful World stamp set and co-ordinating Wonderful World dsp used for a pretty floral card

The image was then die cut using the Stylish Shapes Dies. The circle was then added to the card front on Dimensionals.

The sentiment from the Sending Smiles stamp set was stamped in Orchid Oasis ink onto scrap Basic White card and trimmed to scrap down using Scissors.

www.crafty-rootes.co.uk – The gorgeous Wonderful World stamp set and co-ordinating Wonderful World dsp used for a pretty floral card

A bow made from the Tahitian Tide 2022-2024 In Color Baker’s Twine and a trio of 2022-2024 In Color Dots completed the card.

This dsp is so pretty. I hope you like the card.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A thank you card made using strips of Design A Daydream dsp and the Meadow Dies by Stampin' Up! for the Stamping With Friends Blog Hop!

Striped Floral card for the Stamping With Friends Blog Hop

Posted on July 2, 2022June 18, 2022 by Mo Rootes

Hello and welcome to the Stamping With Friends Blog Hop where we are sharing projects using strips of cardstock and/or dsp. I have made a striped floral card using the Meadow Dies and the gorgeous Design A Daydream dsp.

Colours used in this project are:

To recreate the striped floral card, you will need:

Blushing Bride card base – 8¼” by 5⅞” scored and folded at 4⅛”
Basic White card – 4½” by 3 “
Window Sheet – 4½” by 3”
Design A Daydream dsp – strips ¼”, ⅜” or ½” wide
Basic White card – 5½” by 3 ¾” – for the inside
Scrap Basic Black card

I used Seal + to glue my strips of Design A Daydream dsp, diagonally down the panel of Window Sheet leaving a small gap between each piece.

www.crafty-rootes.co.uk – A thank you card made using strips of Design A Daydream dsp and the Meadow Dies for the Stamping With Friends Blog Hop

The small panel of Basic White was adhered to the centre of the Blushing Bride card base using Multipurpose Liquid Adhesive and the Window Sheet panel added over top on Dimensionals carefully placed under the dsp strips so they would not be seen.

www.crafty-rootes.co.uk – A thank you card made using strips of Design A Daydream dsp and the Meadow Dies for the Stamping With Friends Blog Hop

Using my Stampin’ Cut & Emboss Machine and the Meadow Dies, I die cut one of the flowers from scrap Basic Black card and added it to the striped layer with liquid glue.

www.crafty-rootes.co.uk – A thank you card made using strips of Design A Daydream dsp and the Meadow Dies for the Stamping With Friends Blog Hop

The sentiment, from the Sending Smiles stamp set, was stamped in Versamark ink onto scrap Basic Black card. I covered it with White Embossing Powder and set it with my Heat Tool. It was added to the card front with liquid glue.

www.crafty-rootes.co.uk – A thank you card made using strips of Design A Daydream dsp and the Meadow Dies for the Stamping With Friends Blog Hop

A trio of Matte Black Dots completed the card. I hope you like it.

www.crafty-rootes.co.uk – A thank you card made using strips of Design A Daydream dsp and the Meadow Dies for the Stamping With Friends Blog Hop

Be sure to hop on to see what my stamping friends have to share with you today.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A cluster of bottles themed card made using the Bottled Happiness stamp set and Design A Daydream dsp by Stampin' Up!

Cluster of Bottles card

Posted on June 14, 2022June 10, 2022 by Mo Rootes

Here is a card featuring a cluster of bottles made with the Botted Happiness stamp set and the Design A Daydream designer series paper.

Colours used in this project are:

To recreate the cluster of bottles card, you will need:

Old Olive card base – 8¼” by 5⅞” scored and folded at 4⅛”
Daffodil Delight card – 5½” by 3¾”
Basic White card – 5⅜” by 3⅝”
Design a Daydream dsp – 5⅜” by ¾”
Basic White card – 5½” by 3¾” – for the inside
Scrap Basic White card

I stamped each of the tall bottles in Daffodil Delight, Old Olive and Blackberry Bliss inks onto scrap Basic White card. I repeat this step with the smaller squat bottle. These were then fussy cut out using sharp scissors. I haven’t got around to getting the punch yet!

www.crafty-rootes.co.uk – The Bottled Happiness stamp set and the Design A Daydream designer Series Paper used to make a pretty cluster of bottles themed card

Using Multipurpose Liquid Adhesive, I glued the strip of Design a Daydream dsp to the bottom of the Basic White panel. I added the panel with the same adhesive to the Daffodil Delight layer.

www.crafty-rootes.co.uk – The Bottled Happiness stamp set and the Design A Daydream designer Series Paper used to make a pretty cluster of bottles themed card

I laid out the bottles to decide my placement then lifted them up to stamp the sprigs of foliage in Mint Macaron ink. The die cut bottles were then adhered in place with either liquid glue or Dimensionals.

www.crafty-rootes.co.uk – The Bottled Happiness stamp set and the Design A Daydream designer Series Paper used to make a pretty cluster of bottles themed card

A length of Baker’s Twine was wrapped around the panel before it was added to the Old Olive card front on Dimensionals.

www.crafty-rootes.co.uk – The Bottled Happiness stamp set and the Design A Daydream designer Series Paper used to make a pretty cluster of bottles themed card

The sentiment from the Sending Smiles stamp set was stamped in Blackberry Bliss ink onto scrap Basic White card and fussy cut out using Scissors.

www.crafty-rootes.co.uk – The Bottled Happiness stamp set and the Design A Daydream designer Series Paper used to make a pretty cluster of bottles themed card

I added a double Baker’s Twine bow and a trio of Basic Rhinestones to finish the card. I hope you like it.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The Wisteria Wishes stap set and Sun Prints Designer Series Paper by Stampin' Up! used to make a pretty note of thanks card

Striped Wisteria card for the Ink. Stamp. Share. Blog Hop

Posted on June 11, 2022June 3, 2022 by Mo Rootes

Hello and welcome to the Ink. Stamp. Share Blog Hop where we are sharing something we have been working on recently. I am currently putting together a class featuring the Wisteria Wishes stamp set and, in addition to the 3 cards we will make in class I try to have other examples made using the set to demonstrate versatility. Today I am sharing one of my extra cards which I have called striped wisteria.

The colours used in this project are:

Basic White

Garden Green

Orchid Oasis

To recreate the striped wisteria card, you will need:

Orchid Oasis card base – 8¼” by 5⅞” scored and folded at 4⅛” – rounded upper left corner
Basic White card – 5⅝” by 3⅞” – rounded upper left corner
Sun Prints dsp – 5½” by 3¾” – rounded upper left corner
Basic White card – 5” by 3½”
Garden Green card – 1½” by ¾” – rounded upper left corner
Basic White card – 5½” by 3¾” – rounded upper left corner
Scrap Basic White strip

I began by die cutting a scalloped rectangle using the Scalloped Contour Dies.

www.crafty-rootes.co.uk – A pretty note of thanks card made using the Wisteria Wishes stamp set and the Sun Prints designer Series Paper

The leafy branch was stamped in Garden Green ink towards the top of the scalloped rectangle and I added the trio of wisteria flowers using Orchid Oasis ink.

www.crafty-rootes.co.uk – A pretty note of thanks card made using the Wisteria Wishes stamp set and the Sun Prints designer Series Paper

Okay, time for a confession, this was going to be a portrait card but………… I cut the striped dsp going in the wrong direction! Don’t you just hate it when you do something like that, so rather than just waste the dsp I turned the card around and transformed it into a landscape card. The dsp panel was glued to the larger Basic White layer using Multipurpose Liquid Adhesive and added to the Orchid Oasis card front using the same glue.

www.crafty-rootes.co.uk – A pretty note of thanks card made using the Wisteria Wishes stamp set and the Sun Prints designer Series Paper

Using my Paper Trimmer, I trimmed off the top and bottom of my decorated scalloped rectangle and added it to the card front on Dimensionals. I actually quite liked how it looked.

www.crafty-rootes.co.uk – A pretty note of thanks card made using the Wisteria Wishes stamp set and the Sun Prints designer Series Paper

The sentiment from the Sending Smiles stamp set was stamped in Garden Green ink onto the strip of scrap Basic White card and then die cut using the Sending Dies. I tucked the strip of Garden Green card under the stamped panel and added the sentiment over the top.

www.crafty-rootes.co.uk – A pretty note of thanks card made using the Wisteria Wishes stamp set and the Sun Prints designer Series Paper

Using a Mossy Meadow Blends Pen I coloured in a trio of Basic Rhinestones and added them to complete the card.

I hop you like it.

Please continue around the hop to share lots of inspiration.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A beautiful saffron roses card made using the Abigail Rose designer Series Paper by Stampin' Up! for the Stamp 'n Hop Blog Hop

Saffron Roses for the Stamp ‘n Hop Blog Hop

Posted on June 11, 2022June 11, 2022 by Mo Rootes

Hello and welcome to the Stamp ‘n Hop Blog Hop where we are sharing projects made using some of the gorgeous designer Series Paper.

The colours used in this project are:

To recreate the saffron roses card, you will need:

Thick Very Vanilla card base – 8¼” by 5⅞” scored and folded at 4⅛”
Fresh Freesia card – 5⅜” by 3⅝”
Abigail Rose dsp – 5¼” by 3½”
Smoky Slate card – 2” by 2”
Vellum – 2“by 2”
Basic Gray card – 2” by 2”

Having cut the piece of Abigail Rose dsp, I used the following Blend Pens to colour in the flowers and leaves: So Saffron, Fresh Freesia & Soft Sea Foam.

www.crafty-rootes.co.uk – The gorgeous Abigail Rose designer Series Paper used to make a saffron roses card for the Stamp ‘n Hop Blog Hop where the theme is dsp

The coloured panel of dsp was then glued to the Fresh Freesia panel using Multipurpose Liquid Adhesive. The whole panel was added to the Thick Very Vanilla card base using the same glue.

www.crafty-rootes.co.uk – The gorgeous Abigail Rose designer Series Paper used to make a saffron roses card for the Stamp ‘n Hop Blog Hop where the theme is dsp

The sentiment from the Charming Sentiments stamp set was stamped onto Basic Gray card in Versamark ink, covered in Gold Embossing Powder and heat set using a Heat Tool. I die cut the sentiment using the Sentiment Silhouette Dies.

www.crafty-rootes.co.uk – The gorgeous Abigail Rose designer Series Paper used to make a saffron roses card for the Stamp ‘n Hop Blog Hop where the theme is dsp

Using the beautiful Shapes Dies I cut circles from the square of Smoky Slate card and Vellum. I added the sentiment to the Vellum circle with Seal +. This was then added onto the Smoky Slate Circle using the same adhesive.

www.crafty-rootes.co.uk – The gorgeous Abigail Rose designer Series Paper used to make a saffron roses card for the Stamp ‘n Hop Blog Hop where the theme is dsp

I added a strip of Seal + to the card front and used it to secure a loop of Gold Shimmer Ribbon before adding the Sentiment over the top. A scattering of Basic Rhinestones completed the card.

www.crafty-rootes.co.uk – The gorgeous Abigail Rose designer Series Paper used to make a saffron roses card for the Stamp ‘n Hop Blog Hop where the theme is dsp

So pretty. Please hop on to share all the lovely projects prepared by my fellow demonstrators. Next up is the lovely Vicky Wright from Australia

June Blog Roll

Gez Carpenter –UK https://www.nigezza.co.uk/2022/06/stamp-n-hop-june-blog-hop-dsp.html

Linda Moore – US https://moorefunstamping.com/june-stamp-n-hop—designer-series-paper

Karen Egan – UK https://craftykarendesigns.blogspot.com/2022/06/hues-of-happiness-stamp-n-hop-blog-hop.html

Jo Blackman – UK https://www.joblackman.com/2022/06/stamp-n-hop-blog-hop-dsp.html

Mo Rootes – UK http://www.crafty-rootes.com/?p=9928

Vicky wright – Australia https://vicky-wright.com/?p=26370

Robbie Susan Chandler https://www.robbiesusanscardsandcrafts.com/2022/06/hues-of-happiness-designer-series-paper.html

Terry Montgomery https://terryficcards.blogspot.com/2022/06/stamp-n-hop-june-blog-hop-designer.html

Kristie Lyn https://mypaperlife.com/2022/06/10/stamp-n-hop-featuring-dsp

Annette Elias https://dekijkkast.blogspot.com/2022/06/frisse-vintagekaart-stamp-n-hop-bloghop.html

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Floral Hello card

Posted on May 24, 2022May 14, 2022 by Mo Rootes

I have been having fun with the Hues of Happiness designer Series Paper today and have made a pretty floral hello card.

Colours used in this project are:

To recreate the floral hello card, you will need:

Night of Navy card base – 8¼” by 5⅝” scored at 4⅛” – rounded upper left corner
Flirty Flamingo card – 5¼” by 3½” – rounded upper left corner
Hues of Happiness dsp – 5⅛” by 3⅜” – rounded upper left corner
Basic White card – 1⅝” by 1¼”
Melon Mambo – 3¼” by ¾”
Basic White card – 5½” by 3¾” – rounded upper left corner for the inside

Using Multipurpose Liquid Adhesive, I glued the panel of Hues of Happiness dsp to the Flirty Flamingo layer. This was mounted onto the Night of Navy card front.

www.crafty-rootes.co.uk – A floral hello card made using the Hues of Happiness dsp by Stampin’ Up!

I stamped the HELLO form the Biggest Wish stamp set in Night of Navy ink onto the 1⅝” by 1¼” Basic White panel.

www.crafty-rootes.co.uk – A floral hello card made using the Hues of Happiness dsp by Stampin’ Up!

To the card front I glued the Basic White strip and the Melon Mambo strip, with the ends flagged.

www.crafty-rootes.co.uk – A floral hello card made using the Hues of Happiness dsp by Stampin’ Up!

The sentiment was then added over the top on Dimensionals.

www.crafty-rootes.co.uk – A floral hello card made using the Hues of Happiness dsp by Stampin’ Up!

A trio of Iridescent Rhinestones completed the card.

www.crafty-rootes.co.uk – A floral hello card made using the Hues of Happiness dsp by Stampin’ Up!

I hope you like it.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used: