To recreate the bear in a jumper card, you will need:
Real Red card base – 8¼” by 5⅞” – scored at 4⅛” – rounded upper right corner Basic White card – 5½” by 3¾” x 2 – rounded upper right corner Beary Christmas dsp – 5⅜” by 1½” Basic White card – 3½” by 3” Scrap Beary Christmas dsp
The strip of Beary Christmas was glued to one of the 5½” by 3¾” panels of Basic White card. I wrapped a length of Real Red Ribbon around the panel before adding it to the Real Red card base.
www.crafty-rootes.com – A beautiful bear in a jumper Christmas card made using the Beary Christmas dsp and the Beary Cute stamp set and Punch
Using the Stylish Shapes Dies, I die cut a label from the smaller piece of Basic White card. I used a Blending Brush to add Misty Moonlight ink to the centre of the label.
www.crafty-rootes.com – A beautiful bear in a jumper Christmas card made using the Beary Christmas dsp and the Beary Cute stamp set and Punch
The smaller snowflake was randomly stamped in 2nd generation Misty Moonlight ink.
www.crafty-rootes.com – A beautiful bear in a jumper Christmas card made using the Beary Christmas dsp and the Beary Cute stamp set and Punch
Using the Bear Punch, I punched out one of the bears from a piece of Beary Christmas dsp. I used a Sponge Dauber to add Misty Moonlight ink to tone down the edges around the bear and added it to the inked panel. The panel was then added to the card front on Dimensionals.
www.crafty-rootes.com – A beautiful bear in a jumper Christmas card made using the Beary Christmas dsp and the Beary Cute stamp set and Punch
The sentiment was stamped in Misty Moonlight ink.
www.crafty-rootes.com – A beautiful bear in a jumper Christmas card made using the Beary Christmas dsp and the Beary Cute stamp set and Punc
A red bow and a trio of Flat Adhesive Backed Discs completed the card.
I hope you like it.
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Mo x
Hello and welcome to the Stamping With Friends Blog Hop where we are sharing balcony fun fold cards. Now, I have never made one of these fun folds and spent quite a bit of time working out what I wanted to do. This card, made using the Beary Cute stamp set was inspired by a Youtube video made by the super talented Jay Soriano
To recreate the bears on a balcony card, you will need:
Night of Navy card base – 8¼” by 5⅞” – scored at 4⅛” Basic White card – 5⅝” by ⅞” x 4 – one for the back of the card to write on Night of Navy card – 5½” by 3¾” x 3 Basic White card – 8½” by 2” – scored at 4⅛ and then at ½” at each end Basic White card – 5¼” by 2¼” – scored at 2¼” and then at ⅜” at each end Scrap Basic White
I tore a piece of copy paper into wavy strips and used them, with a Blending Brush and Night of Navy to add texture to the Night of Navy panels.
I then tried Jay’s technique with the soft pastels and drew over the dark blue lines with the Granny Apple Green pastel stick.
www.crafty-rootes.com – A Bears on a Balcony fun fold card made for the Stamping With Friends Blog Hop using the Beary Cute stamp set and Beary Cute Punch and the Joseph’s Coat technique
I used the flat end of the stick to stroke the colour upwards. I added some of the Gorgeous Grape using the pastel stick then lightly blended the colour with a Sponge Dauber.
The pastels have a tendency to smudge so I sprayed the panels with hairspray to set the colour.
www.crafty-rootes.com – A Bears on a Balcony fun fold card made for the Stamping With Friends Blog Hop using the Beary Cute stamp set and Beary Cute Punch and the Joseph’s Coat technique
The panels were then glued to the Basic White panels and were then glued to the front and inside of the Night of Navy card base.
Taking the 2 strips of Basic White card, I cut a wavy pattern along the top.
www.crafty-rootes.com – A Bears on a Balcony fun fold card made for the Stamping With Friends Blog Hop using the Beary Cute stamp set and Beary Cute Punch and the Joseph’s Coat technique
I took more of the copy paper strips and used a Sponge Dauber to stroke on Pool Party ink to give the effect of snow which would ground my bears.
I glued the inked strips to the inside of the card using the tabs at either end, making sure to line the centre of each strip to the centre of the card.
www.crafty-rootes.com – A Bears on a Balcony fun fold card made for the Stamping With Friends Blog Hop using the Beary Cute stamp set and Beary Cute Punch and the Joseph’s Coat technique
Onto scrap Basic White card, I stamped a variety of bears from the stamp set in Night of Navy ink.
Some I punched out using the Beary Cute Punch, the others I fussy cut out.
www.crafty-rootes.com – A Bears on a Balcony fun fold card made for the Stamping With Friends Blog Hop using the Beary Cute stamp set and Beary Cute Punch and the Joseph’s Coat technique
The bears were then added to the inside of the card and the card front.
The sentiment was a bit of an after-thought and was stamped in Night of Navy on a scrap of inked Basic White card. I added it to the card front with liquid glue.
www.crafty-rootes.com – A Bears on a Balcony fun fold card made for the Stamping With Friends Blog Hop using the Beary Cute stamp set and Beary Cute Punch and the Joseph’s Coat technique
A scattering of Iridescent Rhinestones completed the card.
www.crafty-rootes.com – A Bears on a Balcony fun fold card made for the Stamping With Friends Blog Hop using the Beary Cute stamp set and Beary Cute Punch and the Joseph’s Coat technique
I was fairly pleased with the way it turned out. Hope you like it.
Please hop over to share the gorgeous balcony cards made by my crafty friends.
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
To recreate the Beary Christmas card, you will need:
2 card bases – 8¼” by 5⅞” – scored at 4⅛” – I chose Thick Basic White & Night of Navy To matting layers – 5⅝” by 3⅞” – I used Basic White & Night of Navy Beary Christmas dsp – 5 ½” by 3 ¾” x 2 Basic White card – 5 ½” by 3 ¾” x 1 for the inside Scrap Basic White strip
I cut the 2 panels of dsp, carefully keeping the offcuts for use in other projects and adhered them, one to the Night of Navy layer and the other to the 5⅝” by 3⅞” panel of Basic White card.
www.crafty-rootes.com – The gorgeous Beary Christmas Designer Series Paper used to make 2 pretty bear on an ice flow Christmas cards
The white back panel was adhered to the Night of Navy card base on Dimensionals.
www.crafty-rootes.com – The gorgeous Beary Christmas Designer Series Paper used to make 2 pretty bear on an ice flow Christmas cards
The Night of Navy panel was glued to the Thick Basic White card base using Multipurpose Liquid Adhesive.
www.crafty-rootes.com – The gorgeous Beary Christmas Designer Series Paper used to make 2 pretty bear on an ice flow Christmas cards
The sentiment was stamped in Night of Navy ink onto the scrap strip of Basic White card.
www.crafty-rootes.com – The gorgeous Beary Christmas Designer Series Paper used to make 2 pretty bear on an ice flow Christmas cards
I trimmed them down with scissors and flagged one end.
www.crafty-rootes.com – The gorgeous Beary Christmas Designer Series Paper used to make 2 pretty bear on an ice flow Christmas cards
Using sharp scissors, I cut a strip of ribbon along the length and using Tear ‘n Tape I glued the ribbon to the bottom of each sentiment strip. They were added to the card fronts.
www.crafty-rootes.com – The gorgeous Beary Christmas Designer Series Paper used to make 2 pretty bear on an ice flow Christmas cards
A trio of Iridescent Flat Backed discs completed the cards.
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Hello and welcome to the Share It Sunday Blog Hop where we are sharing something we have been working on recently. I am sharing a sweet card featuring the polar bear from the Beary Cute stamp set and some of the Beary Christmas DSP.
To recreate the beary cute Christmas card, you will need:
Thick Basic White card base – 8¼” by 5⅞” – scored at 4⅛” Basic White card – 3¾” & 3¾” Beary Christmas dsp – a mix of ¼”, ⅜” and ½” strips Scrap Basic White
I glued the strips of dsp to the square of Basic White, making sure to cover the whole panel.
The overhanging pieces were trimmed off and a Stitched Circle die cut from it using the Stylish Shapes Dies. The panel was mounted onto the Thick Basic White card front on Dimensionals.
www.crafty-rootes.co.uk – The Beary Cute stamp set, Bear Punch & scraps of Beary Christmas dsp usd to make a pretty bear themed Christmas card for the Share It Sunday Blog Hop
The bear, from the Beary Cute stamp set was stamped in Misty Moonlight ink. I punched the bear out with the Bear Punch.
www.crafty-rootes.com – The Beary Cute stamp set, Bear Punch & scraps of Beary Christmas dsp usd to make a pretty bear themed Christmas card for the Share It Sunday Blog Hop
I added the bear to the card front using liquid glue and Dimensionals.
www.crafty-rootes.com – The Beary Cute stamp set, Bear Punch & scraps of Beary Christmas dsp usd to make a pretty bear themed Christmas card for the Share It Sunday Blog Hop
The sentiment was stamped in Misty Moonlight ink.
www.crafty-rootes.com – The Beary Cute stamp set, Bear Punch & scraps of Beary Christmas dsp usd to make a pretty bear themed Christmas card for the Share It Sunday Blog Hop
A trio of Tinsel Gems, the four pack and a couple of Flat Adhesive backed discs completed the card.
www.crafty-rootes.com – The Beary Cute stamp set, Bear Punch & scraps of Beary Christmas dsp usd to make a pretty bear themed Christmas card for the Share It Sunday Blog Hop
Please hop on to share the crafty inspiration provided by my crafty friends.
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
This deer at sunset card has been in my mind for a while and finally I have got around to making it. I have used the gorgeous Grassy Grove stamp set and some ink blending.
To recreate the deer at sunset card, you will need:
Flirty Flamingo card base – 8¼” by 5⅞” – scored at 4⅛” – Rounded lower right corner Basic Black card – 5⅜” by 3⅝” – Rounded lower right corner Basic White card – 5¼” by 3½” – Rounded lower right corner Flirty Flamingo card – 3” by ½” Basic White card – 5½” by 3¾” – Rounded lower right corner – for the inside
Using the largest circle from the Stylish Shapes, I die cut a circle from a sheet of printer paper. This will act as a mask. The ‘mask’ was added over the 5¼” by 3½” piece of Basic White card. I used a little washi tape to hold the mask in place.
wwww.crafty-rootes.co.uk -A beautiful deer at sunset card made using the Grassy Grove stamp set and some ink blending
Using a Blending Brush, I swirled Lemon Lolly ink over the top three quarters of the negative circle. I added Daffodil Delight around the edge of the circle leaving the centre of the circle a lighter colour.
Flirty Flamingo ink was added to the bottom of the circle and the mask was then removed.
wwww.crafty-rootes.co.uk -A beautiful deer at sunset card made using the Grassy Grove stamp set and some ink blending
I inked up the meadow grass image with Memento Tuxedo Black ink and stamped it near the bottom of the inked circle. The deer image was added using the same ink.
wwww.crafty-rootes.co.uk -A beautiful deer at sunset card made using the Grassy Grove stamp set and some ink blending
The sentiment from the Sending Smiles stamp set was originally stamped onto the stamped and inked panel below the meadow grass, but I really didn’t like it, so Plan B………. the sentiment was stamped again in Memento Tuxedo black ink onto a piece of Flirty Flamingo card. I die cut it using a die from the Sending Dies and added it, on Dimensionals, over the wrongly stamped sentiment……….much better.
wwww.crafty-rootes.co.uk -A beautiful deer at sunset card made using the Grassy Grove stamp set and some ink blending
A black Baker’s Twine bow was tucked under the sentiment and a trio of Glossy Dots completed the card.
wwww.crafty-rootes.co.uk -A beautiful deer at sunset card made using the Grassy Grove stamp set and some ink blending
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Old Olive card base – 8¼” by 5⅞” – scored at 4⅛” Daffodil Delight card – 5⅜” by 3⅝” Basic White card – 5¼” by 3½” Basic White card – 2½” by 2½” Basic Black card – 4” by ½” Basic White card – 5½” by 3¾” – for the inside Scrap Basic White & Basic Black card
Using Old Olive ink, I stamped the large leaf randomly across the 5¼” by 3½” panel of Basic White card. The stamped layer was then adhered to the Daffodil Delight card using Multipurpose Liquid Adhesive.
wwww.crafty-rootes.co.uk – A pretty card made using the Hello Ladybug stamp set and Ladybug Builder Punch
The sentiment was stamped in Versamark ink onto the strip of Basic Black card, covered with White Embossing Powder and heat set. I flagged the end before adding the strip to the stamped panel and trimmed off the excess.
wwww.crafty-rootes.co.uk – A pretty card made using the Hello Ladybug stamp set and Ladybug Builder Punch
The whole piece was then glued to the Old Olive card front.
wwww.crafty-rootes.co.uk – A pretty card made using the Hello Ladybug stamp set and Ladybug Builder Punch
A 2¼” Circle was punched out using a circle punch. I stamped the trio of flowers randomly over the circle in 2nd generation Daffodil Delight ink.
wwww.crafty-rootes.co.uk – A pretty card made using the Hello Ladybug stamp set and Ladybug Builder Punch
I stamped the ladybird leaves in Daffodil Delight ink onto scrap Basic White card and punched them out using the Ladybug Builder Punch. I also punch the ladybird body from scrap Basic Black card. The 2 pieces were glued together and the ladybird was added to the stamped circle.
wwww.crafty-rootes.co.uk – A pretty card made using the Hello Ladybug stamp set and Ladybug Builder Punch
The circle was added to the card front on Dimensionals and a trio of Festive Pearls completed the card
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
To recreate the pelican on a post card, you will need:
Night of Navy card base – 8¼” by 5⅞” – scored at 4⅛” Basic White card – 5½” by 3¾” x 2 – one for the inside Stargazing dsp – 5⅜” by 3⅝” Basic White card – 4¼” by 2½” Scrap Basic White card
The panel of Stargazing designer series paper (dsp) was glued to one of the Basic White panels. A length of Tahitian Tide Metallic Ribbon was wrapped around the panel and secured on the back with Sellotape.
wwww.crafty-rootes.co.uk – A pelican on a post thank you card made using the Waves of Inspiration stamp set and the Nested Essentials dies
I added it to the Night of Navy card base using Multipurpose Liquid Adhesive.
wwww.crafty-rootes.co.uk – A pelican on a post thank you card made using the Waves of Inspiration stamp set and the Nested Essentials dies
Using Pebbled Path ink, I stamped the pelican on a post onto the 4¼” by 2½” panel of Basic White card and die cut it out using the Nested Essentials dies. I coloured the pelicans bill in with a Pumpkin Pie Blends Pen. The die cut piece was mounted onto the card front on Dimensionals.
wwww.crafty-rootes.co.uk – A pelican on a post thank you card made using the Waves of Inspiration stamp set and the Nested Essentials dies
The trio of clouds from the Playing in the Rain stamp set were stamped in Tahitian Tide ink onto scrap Basic White card and die cut using the Playing in the Rain dies. They were added to the card front around the raised panel.
wwww.crafty-rootes.co.uk – A pelican on a post thank you card made using the Waves of Inspiration stamp set and the Nested Essentials dies
The sentiment from the Sending Smiles stamp set was stamped in Night of Navy ink onto scrap Basic White card and trimmed down. It was added to the card front.
wwww.crafty-rootes.co.uk – A pelican on a post thank you card made using the Waves of Inspiration stamp set and the Nested Essentials dies
A ribbon bow and a trio of Pastel Sequins completed the card.
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Fresh Freesia card base – 8¼” by 5⅞” – scored at 4⅛” Basic White dsp – 8” by 5⅝” – scored at 3⅞” & 5⅞” Basic White – 5⅝” by 3⅞” 2¼” Basic Black circle 2” Basic White circle Scrap Basic White & Basic Black
Using Fresh Freesia ink, we stamped the trio of small flowers from the upper left to lower right corner of the 5⅝” by 3⅞” panel of Basic White card. The tiny trio of dots were then added in Sweet Sorbet ink. The piece was then glued to the Fresh Freesia card front.
www.crafty-rootes.co.uk – The Hello Ladybug stamp set and Ladybug Builder Punch used to make cards for my May 2023 Hello Ladybird classes
Using the 2¼” Circle Punch, pushed in as far as it would go from the top of the card front, we punched a circle.
The scorelines on the larger piece of Basic White card were folded and burnished and the largest panel was adhered to the inside of the Fresh Freesia card base.
www.crafty-rootes.co.uk – The Hello Ladybug stamp set and Ladybug Builder Punch used to make cards for my May 2023 Hello Ladybird classes
The ladybird wings were stamped in Sweet Sorbet ink onto scrap Basic White card and the black spots added in Memento Tuxedo Black ink. They were punched out using the Ladybug Builder, shaped using a Bone Folder and added, with a Mini Glue Dot to the ladybird body which had been punched from scrap Basic Black card.
www.crafty-rootes.co.uk – The Hello Ladybug stamp set and Ladybug Builder Punch used to make cards for my May 2023 Hello Ladybird classes
The ladybird was added to the white circle with glue and the white circle added to the black circle with Multipurpose Liquid Adhesive.
www.crafty-rootes.co.uk – The Hello Ladybug stamp set and Ladybug Builder Punch used to make cards for my May 2023 Hello Ladybird classes
We closed the card, added adhesive to the right side of the black circle and added it into the punch hole, gluing it to the folded Basic White layer. A trio of Matte Black Dots completed the card
Ladybird and Yellow Daisies card
Sweet Sorbet card base – 8¼” by 5⅞” – scored at 4⅛” Basic Black – 5⅛” by 3⅜” Basic White – 5” by 3¼” Basic White 5½” by 3¾” – for the inside 2¼” Basic Black circle 2” Basic White circle Scrap Basic White & Basic Black
We stamped all over the 5” by 3¼” panel of Basic white card using the daisy image and Daffodil Delight ink. The flower centres were then added with Memento Tuxedo Black ink. The whole panel was then embossed using the Timeworn Type Embossing Folder.
www.crafty-rootes.co.uk – The Hello Ladybug stamp set and Ladybug Builder Punch used to make cards for my May 2023 Hello Ladybird classes
The embossed piece was then glued to the Basic Black layer and a length of Black & White Gingham Ribbon wrapped around and adhered on the back with Sellotape. The whole panel was then mounted onto the Sweet Sorbet card base.
The ladybird wings were stamped in Sweet Sorbet ink onto scrap Basic White. They were punched out using the Ladybug Builder, shaped using a Bone Folder and added, with a Mini Glue Dot to the ladybird body which had been punched from scrap Basic Black card.
The ladybird was added to the white circle with glue and the white circle added to the black circle with Multipurpose Liquid Adhesive. A Black & White Gingham Ribbon completed the card.
Ladybird on a leafy background
Thick Basic White card base – 8¼” by 5⅞” – scored at 4⅛” Basic Black – 5⅛” by 3⅜” Parakeet Party – 5” by 3¼” Vellum – 4¾” by 3” Basic White ¼” strip Scrap Basic White & Basic Black
We randomly stamped the large leaf all over the Parakeet Party panel in Parakeet Party ink and adhered it to the Basic Black panel. This was then added with liquid glue to the Thick Basic Whit card base.
www.crafty-rootes.co.uk – The Hello Ladybug stamp set and Ladybug Builder Punch used to make cards for my May 2023 Hello Ladybird classes
The ladybird wings were stamped in Sweet Sorbet ink onto scrap Basic White card and the black spots added in Memento Tuxedo Black ink. They were punched out using the Ladybug Builder, shaped using a Bone Folder and added, with a Mini Glue Dot to the ladybird body which had been punched from scrap Basic Black card.
The ladybird was then added to the piece of Vellum using Dimensionals. I added some glue to the piece of vellum behind the ladybird where it would be hidden. The Vellum was then added to the card front.
The sentiment was stamped in Memento Tuxedo Black ink onto the ¼” strip of Basic White card, trimmed down with Scissors and added to the card front.
A trio of Matte Black Dots completed the card and I tucked a Mini Glue Dot under each dot to help secure the Vellum piece.
www.crafty-rootes.co.uk – The Hello Ladybug stamp set and Ladybug Builder Punch used to make cards for my May 2023 Hello Ladybird classes
I hope you like the cards
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
To recreate the sheep thank you card, you will need:
Sahara Sand card base – 8¼” by 5⅞” – scored at 4⅛” Garden Green card – 3¼” by 2⅝” Fluid 100 card – 3⅛” by 2½” Basic White card – 5½” by 3¾” Strips of Basic White, Balmy Blue and Garden Green ⅜” wide
When I am stamping onto watercolor paper, I usually use my Stamparatus. Because the paper is textured the Stamparatus gives me the option of re-stamping if I miss spots or I want the image to be darker. So, I stamped the fields, trees and sheep in StaZon Jet Black ink.
www.crafty-rootes.com – The On The Farm stamp set used to make a pretty, watercoloured, sheep themed thank you card
I added a drop of Balmy Blue re-inker to the lid of the Balmy Blue ink pad and painted in the sky using a Water Painter. After the sky had dried, I coloured the fields in the same way using Garden Green ink.
www.crafty-rootes.com – The On The Farm stamp set used to make a pretty, watercoloured, sheep themed thank you card
The trees were painted with Shaded Spruce and the tree trunks in Early Espresso. I used Memento Tuxedo Black ink re-fill to colour in the sheep and left the panel to dry.
www.crafty-rootes.com – The On The Farm stamp set used to make a pretty, watercoloured, sheep themed thank you card
The dried panel was then glued to the Garden Green card. I used Seal + as the panel was a little warped. The whole piece was mounted onto the Sahara Sand card base on Dimensionals.
www.crafty-rootes.com – The On The Farm stamp set used to make a pretty, watercoloured, sheep themed thank you card
The sentiment, from the Best Family Ever, was stamped in Memento Tuxedo Black ink below the mounted image. I flagged the end of the three strips of card, each ⅜” and tucked them under the image.
www.crafty-rootes.com – The On The Farm stamp set used to make a pretty, watercoloured, sheep themed thank you card
A trio of Fine Sparkle Gems completes the card.
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
To recreate the bear celebration card, you will need:
Thick Basic White card base – 8¼” by 5⅞” – scored at 4⅛” Hues of Happiness dsp – 5½” by 3¾” Basic White card – 4” by 2½” Early Espresso card – 2” by ½”
The dsp was added to the Thick Basic White card using Multipurpose Liquid Adhesive. I ran a strip of Seal + in the middle and zigzagged a strip of White Crinkled Seam Binding Ribbon down the panel.
www.crafty-rootes.co.uk – The Count on Me stamp set used with the Hues of Happiness designer series paper to make a pretty celebration card
I die cut a deckled rectangle, using the Deckled Rectangle Dies from the small panel of Basic White card.
www.crafty-rootes.co.uk – The Count on Me stamp set used with the Hues of Happiness designer series paper to make a pretty celebration card
The cute bear was then stamped onto the deckled rectangle using Early Espresso ink. I added grass using Granny Apple Green ink.
www.crafty-rootes.co.uk – The Count on Me stamp set used with the Hues of Happiness designer series paper to make a pretty celebration card
The following Blends Pens were used to colour in the image – Crumb Cake, Fresh Freesia, Petal Pink and Pool Party. I like to edge the image with a light colour ink to ‘ground’ the image and use a Color Lifter to blur the edges of the colouring. The panel was added to the card front on Dimensionals.
www.crafty-rootes.co.uk – The Count on Me stamp set used with the Hues of Happiness designer series paper to make a pretty celebration card
The sentiment was stamped in Versamark ink onto the strip of Early Espresso card, covered it in White Embossing Powder and heat set it. I trimmed the strip down before adding it to the card front.
www.crafty-rootes.co.uk – The Count on Me stamp set used with the Hues of Happiness designer series paper to make a pretty celebration card
A scattering of Pastel Pearls finished the card. So cute.
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Mo x
Supplies used:
Loading Comments...
By continuing to use the site, you agree to the use of cookies. more information
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.
