The Artistic Mix Decorative Masks, Hand Penned Petals stamp set, Penned Flowers Dies by Stampin' Up! used to make a pretty thank you card.

Hand Penned Flowers card

Posted on September 23, 2022September 17, 2022 by Mo Rootes

Today I am sharing a pretty card inspired by fellow demonstrator Lorna Carter. I loved how Lorna used the Artistic Mix Decorative masks as backgrounds. I have used the same Hand Penned Petals stamp set to make my card but have changed up the colours.

Colours used in this project are:

To recreate the hand penned card, you will need:

Fresh Freesia card base – 8¼” by 5⅞” scored and folded at 4⅛” – rounded upper left corner
Smoky Slate card – 5⅜” by 3⅝” – rounded upper left corner
Basic White card – 5¼” by 3½” – rounded upper left corner
Basic White card – 5½” by 3¾” – rounded upper left corner
Scrap Basic White card

I placed one of the Artistic Mix Decorative Masks onto the smaller panel of Basic White card, holding it in place with a Post It Note. Using a Blending Brush, I added Fresh Freesia ink over the mask. The mask was the removed and the pattern revealed.

www.crafty-rootes.co.uk – A pretty thank you card made using the Hand Penned Petals stamp set, Penned Flowers Dies & the Artistic Mix Decorative Masks by Stampin’ Up!

I stamped the sentiment from the Hand Penned Petals stamp set, in the lower left corner of the inked panel in Smoky Slate ink.

www.crafty-rootes.co.uk – A pretty thank you card made using the Hand Penned Petals stamp set, Penned Flowers Dies & the Artistic Mix Decorative Masks by Stampin’ Up!

Using the same Smoky Slate ink, I stamped the larger group of flowers onto scrap Basic White card. A length of the Silver Metallic Mesh Ribbon was wrapped around the panel and secured on the back with Sellotape. The whole piece was then mounted onto the Fresh Freesia card base with Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – A pretty thank you card made using the Hand Penned Petals stamp set, Penned Flowers Dies & the Artistic Mix Decorative Masks by Stampin’ Up!

I used the following colours to stamp the infill images for the flowers and leaves – Fresh Freesia, Blushing Bride, So Saffron and Pear Pizzazz. The completed piece was mounted over the ribbon to the card front on Dimensionals.

www.crafty-rootes.co.uk – A pretty thank you card made using the Hand Penned Petals stamp set, Penned Flowers Dies & the Artistic Mix Decorative Masks by Stampin’ Up!

A scattering of Iridescent Rhinestones completed the card. So pretty, I love the soft colour palette. Thank you for the inspiration, Lorna.

www.crafty-rootes.co.uk – A pretty thank you card made using the Hand Penned Petals stamp set, Penned Flowers Dies & the Artistic Mix Decorative Masks by Stampin’ Up!

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty house themed thank you card made using the Sale-a-Bratio dsp called Rings of Love by Stampin' Up!

Houses card

Posted on July 29, 2022July 25, 2022 by Mo Rootes

I am loving the Ringed With Love Designer Series Paper which is one of the items you can choose for free with a £50 order from the Sale-a-Bration Brochure and I have used it to make a thank you card featuring houses.

Colours used in this card are:

To recreate the houses card, you will need:

Thick Basic White card base – 8¼” by 5⅞” scored and folded at 4⅛” – rounded upper left corner
Night of Navy card – 5⅜” by 3⅝” – rounded upper left corner
Ringed with Love dsp – 5¼” by 3½” – rounded upper left corner
Basic White card – 2” by 2”

I used Multicoloured Liquid Adhesive to glue the panel of dsp to the Night of Navy layer.

www.crafty-rootes.co.uk – The gorgeous Ringed with Love Dseigner Series Paper used to make a pretty house themed thank you card

A length of Parakeet Party Woven Metallic Ribbon around the panel, twice and secured in place with Sellotape.

www.crafty-rootes.co.uk – The gorgeous Ringed with Love Dseigner Series Paper used to make a pretty house themed thank you card

The sentiment, from the Cup of Tea stamp set was stamped in Night of Navy ink onto the small square of Basic White. This was die cut using the Stylish Shapes dies.

www.crafty-rootes.co.uk – The gorgeous Ringed with Love Dseigner Series Paper used to make a pretty house themed thank you card

The sentiment was added to the card front with Mini Glue Dots. These give a little height but won’t increase the postage.

www.crafty-rootes.co.uk – The gorgeous Ringed with Love Dseigner Series Paper used to make a pretty house themed thank you card

A trio of Champagne Rhinestones completed the card.

www.crafty-rootes.co.uk – The gorgeous Ringed with Love Dseigner Series Paper used to make a pretty house themed thank you card

I hope you like it.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A thank you card made using strips of Design A Daydream dsp and the Meadow Dies by Stampin' Up! for the Stamping With Friends Blog Hop!

Striped Floral card for the Stamping With Friends Blog Hop

Posted on July 2, 2022June 18, 2022 by Mo Rootes

Hello and welcome to the Stamping With Friends Blog Hop where we are sharing projects using strips of cardstock and/or dsp. I have made a striped floral card using the Meadow Dies and the gorgeous Design A Daydream dsp.

Colours used in this project are:

To recreate the striped floral card, you will need:

Blushing Bride card base – 8¼” by 5⅞” scored and folded at 4⅛”
Basic White card – 4½” by 3 “
Window Sheet – 4½” by 3”
Design A Daydream dsp – strips ¼”, ⅜” or ½” wide
Basic White card – 5½” by 3 ¾” – for the inside
Scrap Basic Black card

I used Seal + to glue my strips of Design A Daydream dsp, diagonally down the panel of Window Sheet leaving a small gap between each piece.

www.crafty-rootes.co.uk – A thank you card made using strips of Design A Daydream dsp and the Meadow Dies for the Stamping With Friends Blog Hop

The small panel of Basic White was adhered to the centre of the Blushing Bride card base using Multipurpose Liquid Adhesive and the Window Sheet panel added over top on Dimensionals carefully placed under the dsp strips so they would not be seen.

www.crafty-rootes.co.uk – A thank you card made using strips of Design A Daydream dsp and the Meadow Dies for the Stamping With Friends Blog Hop

Using my Stampin’ Cut & Emboss Machine and the Meadow Dies, I die cut one of the flowers from scrap Basic Black card and added it to the striped layer with liquid glue.

www.crafty-rootes.co.uk – A thank you card made using strips of Design A Daydream dsp and the Meadow Dies for the Stamping With Friends Blog Hop

The sentiment, from the Sending Smiles stamp set, was stamped in Versamark ink onto scrap Basic Black card. I covered it with White Embossing Powder and set it with my Heat Tool. It was added to the card front with liquid glue.

www.crafty-rootes.co.uk – A thank you card made using strips of Design A Daydream dsp and the Meadow Dies for the Stamping With Friends Blog Hop

A trio of Matte Black Dots completed the card. I hope you like it.

www.crafty-rootes.co.uk – A thank you card made using strips of Design A Daydream dsp and the Meadow Dies for the Stamping With Friends Blog Hop

Be sure to hop on to see what my stamping friends have to share with you today.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Pretty Pop Ups

Posted on June 24, 2022June 12, 2022 by Mo Rootes

Today I am sharing a pretty card made using the Pretty Pop-Ups Dies and coloured using a Blending Pen. I don’t actually own these dies but one of my lovely friends and customer Becky, bought them and allowed me to use the dies. This card is for her.

Colours used in this project are:

To recreate the Pretty Pop-Ups card, you will need:

Pale Papaya card base – 8¼” by 5⅞” scored and folded at 4⅛” – rounded upper left corner
Basic White card – 5” by 3¼” – rounded upper left corner
Basic White card – 4⅞” by 3⅛” – rounded upper left corner
Basic White card – 5½” by 3¾” – for the inside – rounded upper left corner

I placed the small, oval Pretty Pop-Ups Die onto the smallest piece of Basic White card and added the two individual butterflies and the dragonfly dies. These were all run through the Stampin’ Cut & Emboss Machine.

www.crafty-rootes.co.uk – The Pretty Pop Ups Dies used to make a softly, sweet floral thank you card

Using a Blender Pen, I coloured the leaves with Mink Macaron ink and the larger flower petals with Poppy Parade ink. The flower centres were added in So Saffron ink.

The tiny flower petals were coloured with Highland Heather ink and the centres added with So Saffron ink.

www.crafty-rootes.co.uk – The Pretty Pop Ups Dies used to make a softly, sweet floral thank you card

The two largest butterflies were coloured with Pool Party ink and the smaller with So Saffron ink. The dragonfly wings were coloured with Pale Papaya ink and Mint Macaron ink. All the insect bodies ere coloured with Gray Granite ink. The sentiment from the Charming Sentiments stamp set was stamped in Pool Party ink.

www.crafty-rootes.co.uk – The Pretty Pop Ups Dies used to make a softly, sweet floral thank you card

Using my Take Your Pick Tool, I pushed up all the pop-up pieces before using Multipurpose Liquid Adhesive to adhere the decorated panel to the slightly larger Basic White panel. I wrapped a length of White Baker’s Twine around the panel, securing it on the back with Sellotape.

www.crafty-rootes.co.uk – The Pretty Pop Ups Dies used to make a softly, sweet floral thank you card

I stamped flower from the Simply Fabulous stamp set in Pale Papaya ink in the upper left and lower right corners of the Pale Papaya card front. The decorated panel was added over-top on Dimensionals.

www.crafty-rootes.co.uk – The Pretty Pop Ups Dies used to make a softly, sweet floral thank you card

A Baker’s Twine Bow and a trio of Fine Sparkle Gems were added to the card front. I added Clear Wink of Stella to the butterflies and dragonfly and finished with a bit of Wink of Stella splatter.

Love these soft colours together. Such a pretty card.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A vintage ranunculus card made for the Kylie Bertucci Demo Blog Hop using the Ranunculus Romance stamp set by Stampin' Up!

Vintage Ranunculus card for the Kylie Bertucci Demo Blog Hop

Posted on June 13, 2022June 5, 2022 by Mo Rootes

Hello and thank you for joining me for the Kylie Bertucci Demo Blog Hop where we are share ideas for customer thank you cards. My vintage ranunculus card is made using a rustic colour palette.

Colours used in this project are:

To recreate the vintage ranunculus thank you card, you will need:

Crumb Cake card base – 8¼” by 5⅞” scored and folded at 4⅛”
Merry Merlot card – 5¼” by 3½”
Crumb Cake card – 5” by 3¼”
Very Vanilla card – 5½” by 3¾”
Vellum card – 3½” by 3½”
Scrap Very Vanilla card

Using Versamark ink, I randomly stamped the scripty image and the spray of flowers image onto the panel of Crumb Cake card. I covered the ink with Gold Embossing Powder and heat set it using my Heat Tool. The embossed panel was then added to the Merry Merlot layer with Multipurpose Liquid Adhesive. I used the same ink to glue the panel to the Crumb Cake card front.

www.crafty-rootes.co.uk – The Ranunculus Romance stamp set used to make a vintage ranunculus card for the Kylie Bertucci Demo Blog Hop

I mounted the ranunculus flower image onto one of the Stamparatus plates. I inked the image up using the Garden Green and Merry Merlot Stamp ‘n Write Markers. I repeated this a couple of times to get the depth of colour I wanted.

The image was then die cut using the Ranunculus Dies.

www.crafty-rootes.co.uk – The Ranunculus Romance stamp set used to make a vintage ranunculus card for the Kylie Bertucci Demo Blog Hop

I die cut a stitched circle from the Stylish Shapes Dies and trimmed off the right-hand side. The flower image was added to the Vellum using dabs of liquid glue. The Vellum piece was then added on Dimensionals, hidden behind the flower to the card front.

www.crafty-rootes.co.uk – The Ranunculus Romance stamp set used to make a vintage ranunculus card for the Kylie Bertucci Demo Blog Hop

The sentiment was stamped in Merry Merlot ink onto scrap Very Vanilla card and die cut using the Sending Dies. It was then added to the card front.

www.crafty-rootes.co.uk – The Ranunculus Romance stamp set used to make a vintage ranunculus card for the Kylie Bertucci Demo Blog Hop

I used the Cherry Cobbler Blends Pens to colour in some Basic Pearls before adding them to the card front.

www.crafty-rootes.co.uk – The Ranunculus Romance stamp set used to make a vintage ranunculus card for the Kylie Bertucci Demo Blog Hop

This card is so out of my comfort zone, but I really like it.

I am looking forward to seeing what my fellow demos have to share with us today.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A beautiful saffron roses card made using the Abigail Rose designer Series Paper by Stampin' Up! for the Stamp 'n Hop Blog Hop

Saffron Roses for the Stamp ‘n Hop Blog Hop

Posted on June 11, 2022June 11, 2022 by Mo Rootes

Hello and welcome to the Stamp ‘n Hop Blog Hop where we are sharing projects made using some of the gorgeous designer Series Paper.

The colours used in this project are:

To recreate the saffron roses card, you will need:

Thick Very Vanilla card base – 8¼” by 5⅞” scored and folded at 4⅛”
Fresh Freesia card – 5⅜” by 3⅝”
Abigail Rose dsp – 5¼” by 3½”
Smoky Slate card – 2” by 2”
Vellum – 2“by 2”
Basic Gray card – 2” by 2”

Having cut the piece of Abigail Rose dsp, I used the following Blend Pens to colour in the flowers and leaves: So Saffron, Fresh Freesia & Soft Sea Foam.

www.crafty-rootes.co.uk – The gorgeous Abigail Rose designer Series Paper used to make a saffron roses card for the Stamp ‘n Hop Blog Hop where the theme is dsp

The coloured panel of dsp was then glued to the Fresh Freesia panel using Multipurpose Liquid Adhesive. The whole panel was added to the Thick Very Vanilla card base using the same glue.

www.crafty-rootes.co.uk – The gorgeous Abigail Rose designer Series Paper used to make a saffron roses card for the Stamp ‘n Hop Blog Hop where the theme is dsp

The sentiment from the Charming Sentiments stamp set was stamped onto Basic Gray card in Versamark ink, covered in Gold Embossing Powder and heat set using a Heat Tool. I die cut the sentiment using the Sentiment Silhouette Dies.

www.crafty-rootes.co.uk – The gorgeous Abigail Rose designer Series Paper used to make a saffron roses card for the Stamp ‘n Hop Blog Hop where the theme is dsp

Using the beautiful Shapes Dies I cut circles from the square of Smoky Slate card and Vellum. I added the sentiment to the Vellum circle with Seal +. This was then added onto the Smoky Slate Circle using the same adhesive.

www.crafty-rootes.co.uk – The gorgeous Abigail Rose designer Series Paper used to make a saffron roses card for the Stamp ‘n Hop Blog Hop where the theme is dsp

I added a strip of Seal + to the card front and used it to secure a loop of Gold Shimmer Ribbon before adding the Sentiment over the top. A scattering of Basic Rhinestones completed the card.

www.crafty-rootes.co.uk – The gorgeous Abigail Rose designer Series Paper used to make a saffron roses card for the Stamp ‘n Hop Blog Hop where the theme is dsp

So pretty. Please hop on to share all the lovely projects prepared by my fellow demonstrators. Next up is the lovely Vicky Wright from Australia

June Blog Roll

Gez Carpenter –UK https://www.nigezza.co.uk/2022/06/stamp-n-hop-june-blog-hop-dsp.html

Linda Moore – US https://moorefunstamping.com/june-stamp-n-hop—designer-series-paper

Karen Egan – UK https://craftykarendesigns.blogspot.com/2022/06/hues-of-happiness-stamp-n-hop-blog-hop.html

Jo Blackman – UK https://www.joblackman.com/2022/06/stamp-n-hop-blog-hop-dsp.html

Mo Rootes – UK http://www.crafty-rootes.com/?p=9928

Vicky wright – Australia https://vicky-wright.com/?p=26370

Robbie Susan Chandler https://www.robbiesusanscardsandcrafts.com/2022/06/hues-of-happiness-designer-series-paper.html

Terry Montgomery https://terryficcards.blogspot.com/2022/06/stamp-n-hop-june-blog-hop-designer.html

Kristie Lyn https://mypaperlife.com/2022/06/10/stamp-n-hop-featuring-dsp

Annette Elias https://dekijkkast.blogspot.com/2022/06/frisse-vintagekaart-stamp-n-hop-bloghop.html

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A quilt themed card made using the Beautiful Shapes Dies and the Sun Prints Designer Series Paper by Stampin' Up!

Sun Quilt card for the Quilting Blog Hop

Posted on May 23, 2022May 14, 2022 by Mo Rootes

Hello and welcome to the Quilting Blog Hop where, not surprisingly we are sharing quilting inspired projects. I have chosen to make a sun quilt card using the Sun Prints dsp.

Colours used in the sun quilt are:

To recreate the quilting card, you will need:

Starry Sky card base – 8¼” by 5⅝” scored at 4⅛”
Pacific Point card – 5⅜” by 3⅝”
Basic White card – 5¼” by 3½”
Basic White card – 5½” by 3¾”
Sun Prints dsp
Scrap Basic White and Night of Navy

I used the Beautiful Shapes Dies to cut a selection of hexagons from the Sun Prints dsp.

www.crafty-rootes.co.uk – The Sun Prints dsp and Beautiful Shapes Dies by Stampin’ Up! used to make a pretty quilting themed card set

Using Multicoloured Liquid Adhesive I adhered the hexagons in a pattern onto the smaller panel of Basic White card. Leaving a small gap between each hexagon.

www.crafty-rootes.co.uk – The Sun Prints dsp and Beautiful Shapes Dies by Stampin’ Up! used to make a pretty quilting themed card set

The sentiment from the Go To Greetings stamp set was stamped in Night of Navy ink onto scrap Basic White card. I trimmed it down using Scissors and added it to a slightly larger piece of Night of Navy card and added it to the decorated panel.

www.crafty-rootes.co.uk – The Sun Prints dsp and Beautiful Shapes Dies by Stampin’ Up! used to make a pretty quilting themed card set

The decorated panel was adhered to the Pacific Point panel using the same liquid glue.

www.crafty-rootes.co.uk – The Sun Prints dsp and Beautiful Shapes Dies by Stampin’ Up! used to make a pretty quilting themed card set

The whole panel was then added to the Starry Sky card front on Dimensionals.

www.crafty-rootes.co.uk – The Sun Prints dsp and Beautiful Shapes Dies by Stampin’ Up! used to make a pretty quilting themed card set

I hope you like the card. Please hop on to share the inspiration provided by my stamping friends.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The Wisteria Wishes stamp set by Stampin' Up! used with 2 of the 2022 - 2024 in colors to create a striking card

Sweet Delphinium card

Posted on May 22, 2022May 16, 2022 by Mo Rootes

Here is a pretty sweet delphinium card made using the gorgeous Wisteria Wishes stamp set.

The colours used in this project are:

Basic White

Sweet Sorbet

Parakeet Party

To recreate the sweet delphinium card, you will need:

Parakeet Party card base – 8¼” by 5⅞” scored and folded at 4⅛”
Basic White card – 4⅛” by 2”
Strawberry Sorbet card – 4⅛” by ½” x 2
Basic White card – 5½” by 3¾”
Scrap Basic White

Using the Parakeet Party ink, I stamped the trio of stalks and leaves and the blooms across the front of the Parakeet Party card front.

www.crafty-rootes.co.uk – A sweet delphinium card made using the Wisteria Wishes stamp set by Stampin’ Up!

I stamped the stalks and leaf image again onto the small panel of Basic White card.

www.crafty-rootes.co.uk – A sweet delphinium card made using the Wisteria Wishes stamp set by Stampin’ Up!

The blooms were stamped in Sweet Sorbet ink.

www.crafty-rootes.co.uk – A sweet delphinium card made using the Wisteria Wishes stamp set by Stampin’ Up!

The Sweet Sorbet strips were added either side of the stamped panel. I wrapped a length of Sweet Sorbet Metallic Woven Ribbon around the panel.

www.crafty-rootes.co.uk – A sweet delphinium card made using the Wisteria Wishes stamp set by Stampin’ Up!

The sentiment from the Sending Smiles stamp set was stamped in Sweet Sorbet ink onto scrap Basic White card and die cut using the Sending Des before being added to the card front.

www.crafty-rootes.co.uk – A sweet delphinium card made using the Wisteria Wishes stamp set by Stampin’ Up!

The card was finished with a bow and a trio of 2022 – 2024 In Color Matte Dots.

Such a pretty card, I hope you like it.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The Hues of Happiness designer Series Paper by Stampin' Up! used to make a pretty rosie thank you card

Rosie Thanks card

Posted on May 20, 2022May 13, 2022 by Mo Rootes

I have been playing with the gorgeous Hues of Happiness dsp today, I can’t get enough of this paper. I have made a pretty rosie thanks card to share.

Colours used in this project are:

To recreate the rosie thanks card, you will need:

Fresh Freesia card base – 8¼” by 5⅝” scored at 4⅛”
Basic White card – 5½” by 3¾” x 2, one for the inside
Hues of Happiness dsp – 5⅜” by 3⅝”
Basic White card – 2 ½” by 2½”
Basic White ¼” strip

The panel of dsp was added to one of the larger layers of Basic White card using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – A rosie thank you card made using the Hues of Happiness designer series paper by Stampin’ Up!

I used the same glue to adhere the panel to the Fresh Freesia card base.

www.crafty-rootes.co.uk – A rosie thank you card made using the Hues of Happiness designer series paper by Stampin’ Up!

Using the Stylish Shapes Dies, I die cut a stitched rectangle and added it to the card front on Dimensionals.

www.crafty-rootes.co.uk – A rosie thank you card made using the Hues of Happiness designer series paper by Stampin’ Up!

A purple rose was die cut from the pretty dsp along with two leaves. I used my Bone Folder to curve the flower and leaves and added the flower to the stitched square on a Dimensional. The flower was tucked under and held in place with a dab of liquid glue.

www.crafty-rootes.co.uk – A rosie thank you card made using the Hues of Happiness designer series paper by Stampin’ Up!

The sentiment from the Sending Smiles stamp set was stamped on the strip of Basic White card. I trimmed it down using scissors and added it to the card with glue and Dimensionals.

www.crafty-rootes.co.uk – A rosie thank you card made using the Hues of Happiness designer series paper by Stampin’ Up!

A trio of Brushed Butterflies completes the card. So pretty.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty rainbow and cloud themed card for the Ink. Stamp. Share Blog Hop

Brilliant Rainbow in the Clouds for the Ink. Stamp. Share Blog Hop

Posted on May 14, 2022May 5, 2022 by Mo Rootes

Hello and welcome to the Ink. Stamp. Share Blog Hop where we are sharing something we have been working on. I have chosen to share a cheerful rainbow in the clouds thank you card made using the Brilliant Rainbow Dies.

Colours used in this project are

To recreate the brilliant rainbow in the clouds card, you will need:

Thick Basic White card base – 8¼” by 5⅞” scored and folded at 4⅛”
Magenta Madness card – 4⅛” by 3⅛”
Beauty of the Earth dsp – 4” by 3”
Scrap Basic White, Magenta Madness, Mango Melody, Pacific Point & Granny Apple Green

I punched lots of clouds from scrap Basic White card using the Cloud Punch and glued them, randomly across the Thick Basic White card front. I used Multipurpose Liquid Adhesive. I trimmed off the overhanging pieces with Scissors.

www.crafty-rootes.co.uk -The Brilliant Rainbow dies and Rainbow of Happiness stamp set used for the Ink. Stamp. Share. Blog Hop

Using the Brilliant Rainbow Dies, I die cut the rainbow arcs from scrap Magenta Madness, Mango Melody, Pacific Point & Granny Apple Green card and arranged them onto the piece of Beauty of the Earth dsp. They were glued down with the same liquid adhesive.

www.crafty-rootes.co.uk -The Brilliant Rainbow dies and Rainbow of Happiness stamp set used for the Ink. Stamp. Share. Blog Hop

The rainbow panel was then added to the Magenta Madness layer with liquid glue and then added to the card front with the same glue.

www.crafty-rootes.co.uk -The Brilliant Rainbow dies and Rainbow of Happiness stamp set used for the Ink. Stamp. Share. Blog Hop

I die cut the small clouds from the Brilliant Rainbow Dies using the Stampin’ Cut and Emboss Machine and added them to the card front with either liquid glue of Dimensionals.

www.crafty-rootes.co.uk -The Brilliant Rainbow dies and Rainbow of Happiness stamp set used for the Ink. Stamp. Share. Blog Hop

The sentiment from the Rainbow of Happiness stamp set was stamped in Pacific Point on scrap Basic White and trimmed down and fagged using Scissor before it was glued to the card front.