Today I am sharing the cards I designed for my March Stamp-A-Stack using the gorgeous Petals of Beauty stamp set and co-ordinating dies. I designed 10 cards, and the ladies make 2 of each design.
Colours used to make these cards are:
Each attendee’s pack contained the Petals of Beauty stamp set and dies. A pack of 2024 – 2026 In Color Flat Pearls, 5 ink spots filled with Pool Party, Soft Sea Foam, Petunia Pop, Timid Tiger, Night of Navy inks, 20 Envelopes, 20 card bases and all the layers, embossed and die cut pieces to create the cards.
Card 1 – Collage Birthday Wishes
Petunia Pop card bases – 8¼” by 5⅞” – scored at 4⅛” x 2
Basic White – 5” by 3¼” x 2
Night of Navy – 4½” by ½” x 2
Basic White – 4½” by ½” x 2
Basic White label x 2 – die cut with Nested Essentials
Basic White – 5½” by 3¾” x 2 – for the inside

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Stamp the large solid floral image, randomly all over the 5” by 3¼” piece of Basic White with Pool Party ink. Stamp the small outline floral image, randomly all over with Night of Navy ink. Add the flower centres to the Night of Navy flowers with Petunia Pop ink. Glue the Night of Navy strip to the left side, add the White strip and glue to card front. Stamp sentiment in Night of Navy onto die cut rectangle – add to card front on Dimensionals
Card 2 – Faux Silk
Pool Party card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Night of Navy – 5¼” by 3½” x 2
Basic White – 5” by 3¼” x 2
Adhesive Sheet – 5” by 3¼” x 2
White Tissue Paper – minimum of 5½” by 3¾” x 2
Basic White label x 2 die cut with Nested Essentials dies
Basic White card – 5½” by 3¾” x 2- for the inside

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Stamp the outline of the small floral image, randomly all over the 5¼” by 3½ piece of Basic White with Pool Party ink. Stamp the large outline floral image, randomly all over with Night of Navy ink. Add the flower centres to all flowers with Petunia Pop ink. Apply Adhesive Sheet to the front of the stamped panel. Screw up the piece of tissue paper, open out but DON’T smooth out fully. Use to cover the exposed adhesive sheet pressing down the wrinkles and rubbing over the image.

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Fold excess tissue paper to the back and glue down. Glue to the Night of Navy layer and then to card base. Stamp the sentiment onto die cut label with Night of Navy ink add to card front on Dimensionals.
Card 3 – Flowers on Embossed Background
Soft Sea Foam card base – 8¼” by 5⅞” scored at 4⅛” x 2
Petunia Pop – 5⅛” by 3⅜” x 2
Basic White – 5” by 3¼” x 2 – embossed
Basic White – 1⅞” by ⅜” x 2
Basic White card – 5½” by 3¾” x 2- for the inside
Scrap Basic White

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Glue the embossed panel to the Petunia Pop layer and then to the Soft Sea Foam card base. Stamp the outline of the large flower with Petunia Pop ink onto scrap Basic White card then stamp the solid flower in Petunia Pop ink – stamped off once over top. Add the flower centre with Navy ink. Stamp the outline small flower with Night of Navy ink onto scrap Basic White card. Add the solid flower over top in Night of Navy – stamped off once or twice, you choose. Add the flower centres with Petunia Pop ink. Stamp leafy spray in Soft Sea Foam ink on scrap Basic White card. Die cut all the images.
Glue blue flower and leafy spray to card front and add pink flower on Dimensionals. Stamp the sentiment in Petunia Pop ink on the strip of white and add to card front.
Card 4 – Floral Birthday
Timid Tiger card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Night of Navy – 5⅛” by 3⅜” x 2
Basic White – 5” by 3¼” x 2
Basic White label – die cut with Nested Essentials x 2
Basic White – 5½” by 3¾”” x 2 for the inside

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Stamp the Outline large Flower with Timid Tiger ink on the smaller White card panel
Stamp the solid large flower in Timid Tiger ink – stamped off once. Add the flower centre with Navy ink. Stamp the outline small flower with Petunia Pop ink, add the solid small flower in Petunia Pop ink – stamped off once and add flower centre with Navy ink.
Stamp the leafy sprig against each flower with Soft Sea Foam ink. Add the trio of small flowers randomly with Night of Navy ink. Glue the stamped panel to the Night of Navy layer then to the card front. Stamp the sentiment on the label with Night of Navy ink. Add on Dimensionals.
Card 5 – Double Orange Flowers
Petunia Pop card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Basic White – 5½” by 3¾” – x 4 – 2 for the inside
Timid Tiger – 5⅛” by 3⅜” – x 2
Basic White – 5” by 3¼”
Soft Sea Foam – 3¾” by 2”
Vellum – 4” by 1¾”
Scrap Basic White

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Stamp the Cluster of small flowers down the left-hand edge of the smaller Basic White panel with Soft Sea Foam ink. Stamp the sentiment in the bottom right corner in Petunia Pop ink.
Glue the panel to the Timid Tiger Layer and then to the Petunia Pop card front.
Stamp the leaf in Soft Sea Foam ink on the Soft Sea Foam card and add the panel to the card front on Dimensionals. Die cut the Vellum Leaf and tuck behind.
Stamp the Outline large & small Flower with Timid Tiger ink on the scrap White card and add the solid flowers in Timid Tiger ink – stamped off once. Add the flower centres with Petunia Pop ink. Die cut the flowers and add to the card front.
Card 6 – Inter-layered Leaves
Night of Navy card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Soft Sea Foam – 5⅛” by 3⅜” x 2
Basic White – 5” by 3¼” x 2 – Embossed using Timeworn Type Embossing Folder
Basic White labels x 2 – die cut with Nested Essentials Dies
Basic White – 5½” by 3¾” x 2 – for the inside
Soft Sea Foam, Pool Party & Night of Navy 8¼” by 3½” piece of each

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Die cut 2 leafy sprigs in each of the three colours. Glue the leafy sprigs onto the embossed panels and trim off the excess. Glue the panel to the Soft Sea Foam layer and then to the Night of Navy card base. Stamp the sentiment in Night of Navy ink onto the die cut label and add to card front on Dimensionals.
Card 7 – Petunia Petals Flowers
Timid Tiger card bases – 8¼” by 5⅞” – scored at 4⅛” x 2
Petunia Pop – 5⅞” by 2” x 2
Basic White – 5⅞” by ⅜” x 4
Basic White – Circles x 2 – die cut using the Spotlight on Nature Dies
Basic White – 5½” by 3¾” x 2 – for the inside
Scrap Basic White

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Stamp the cluster of small flowers in a row, ½” from the top and bottom of the Timid Tiger card front. Stamp the large solid flower in Petunia Pop ink onto the Petunia Pop card. Glue a strip of White on either side and glue to the Timid Tiger card front. Stamp the sentiment with Night of Navy ink onto the die cut circle and add to the card front on Dimensionals.
Stamp the Outline large & small Flower with Petunia Pop ink on the scrap White card, add the solid flowers in Timid Tiger ink – stamped off once. Add the flower centres with Night of Navy ink. Stamp the solid leaf image in stamped off Soft Sea Foam on scrap White card and add the ‘veining’ in full strength Soft Sea Foam. Die cut the flowers and leaves and add to the card front.
Card 8 – Paper-Pieced Leaves
1 Night of Navy and 1 Pool Party card base – 8¼” by 5⅞” – scored at 4⅛”
1 Night of Navy and 1 Pool Party layer – 5⅛” by 3⅜”
Basic White – 5” by 3¼” x 2
Night of Navy and Pool Party – 4⅜” by 1¾” x 2 with Adhesive Sheet applied to the back
Basic White – 5½” by 3¾” x 2 – for the inside

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Die cut the leafy spray from the smaller pieces of Pool Party and Night of Navy card with adhesive on the back. Adhere the outline leafy spray, one on each piece of 5” by 3¼” Basic White card. Piece the leaf shapes into the spaces of both cards. Stamp the sentiment in Night of Navy ink. Adhere the white panels to the Navy or Pool Party layers then to the opposite colour card base.
Card 9 – Double Petunia Pop Flowers
Soft Sea Foam card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Soft Sea Foam – 5⅜” by 3⅝” – embossed with Timeworn Type Embossing Folder and cut in half at an angle
Night of Navy – 5⅞” by ⅛” x 2
Basic White – 5½” by 3¾” x 4 – 2 for the inside
Scrap Basic White & Night of Navy

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Adhere the embossed panel to one of the Basic White pieces, add the strip of Night of Navy card along the top edge and glue the whole panel to the Soft Sea Foam card base.
Stamp the Outline large & small Flower with Petunia Pop ink on the scrap White card, add the solid image in Petunia Pop ink – stamped off once. Add the flower centres with Night of Navy ink. Stamp the solid leaf image in Soft Sea Foam on scrap White card. Die cut the flowers and leaves and 2 veining pieces in Night of Navy. Add the flowers to the card front and tuck the leaves and veining behind. Stamp the sentiment in Navy ink.
Card 10 – Outline Flowers
Pool Party card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Timid Tiger – 5⅛” by 3⅜” x 2
Basic White – 5” by 3¼” x 2
Petunia Pop – 5” by ⅜” x 4
Basic White – 5 ½” by 3 ¾” x 2 – for the inside
Basic White – 7¼” by 3” – with Adhesive Sheet
Scrap Basic White with Adhesive Sheet
Scrap Basic White

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Stamp the outline large & small flowers, randomly on the 7” by 3” Basic White panel. The large in Petunia Pop and the small in Timid Tiger – see picture below.

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Die cut the outline of 2 large and 2 small flowers from the stamped panel. From scrap Basic White die cut 2 outline flowers. Adhere them together and add the patterned piece on top. Repeat this with the smaller flowers. Randomly stamp the cluster of small flowers in Pool Party ink onto the smaller panel of White. Glue stamped panel to the Timid Tiger layer.

www.crafty-rootes.co.uk – The Petals of Beauty stamp set and Petals of Beauty dies used with the Exposed Brick 3D Embossing Folder to make a 10 cards for my March 2026 Stamp-a-Stack
Order goodies/Join My Team
I would love to be your demonstrator if you don’t already have one and live in the UK. I would also be delighted to send you a catalogue if you do not have a demonstrator. I would be happy to place an order for you, or you can order directly by clicking on the “shop online” button.
Contact me for information about joining my team or click on the ‘Join My Team’ button
Details of the products I used for this project can be found below.
Mo x
Supplies used:



